[Buildroot] X11R7 packages available

Nuno da Costa Ferro nferro at nfive.com
Thu Jul 5 13:33:13 UTC 2007


Hi,

Now I'm getting the following error:

mkdir -p /build/firmware/buildroot/build_arm/xutil_util-macros-1.1.5
touch 
/build/firmware/buildroot/build_arm/xutil_util-macros-1.1.5/.stamp_downloaded
make: *** No rule to make target `m4-host', needed by `host-autoconf'. 
Stop.


Kind regards,

Nuno da Costa Ferro
---------------------------
Number Five Software, S.A.
Development & IT Management
Email: nferro at nfive.com
DDI: +351 261 860 472
----- Original Message ----- 
From: Julien Letessier
To: Nuno da Costa Ferro
Cc: Buildroot mailing list
Sent: Wednesday, July 04, 2007 7:12 PM
Subject: Re: [Buildroot] X11R7 packages available


Here's an updated autotools patch.
I just generated it against buildroot r18993 (and tested it).

http://bazaar.mezis.net/buildroot_autotools-v5.patch

Tell me if this solves your problem.


2007/7/4, Nuno da Costa Ferro <nferro at nfive.com>:
nferro at n5nferro-linux:/build/firmware/buildroot/package$ patch -p1 <
../buildroot_autotools4.patch
patching file Makefile.in
Hunk #2 succeeded at 103 (offset -24 lines).
patch: **** malformed patch at line 43: @@ -254,3 +263,5 @@

This is what I got while patching. My error? I'm using the latest buildroot
snapshot.


Kind regards,

Nuno da Costa Ferro
---------------------------
Number Five Software, S.A.
Development & IT Management
Email: nferro at nfive.com
DDI: +351 261 860 472
----- Original Message -----
From: Julien Letessier
To: Nuno da Costa Ferro
Cc: Buildroot mailing list
Sent: Wednesday, July 04, 2007 4:32 PM
Subject: Re: [Buildroot] X11R7 packages available


Did you apply the autotools4 patch (first mail in this thread, also at
http://bazaar.mezis.net/buildroot_autotools4.patch.bz2 )?
All my X11R7 packages use it.

Else it's hard to diagnose...
You can try to "make xlib_libX11" manually, for instance. If this doesn't
work you have a make or makefile problem. Are you using GNU make?

If it works its a different problem. If you have applied my show-var patch
( http://bazaar.mezis.net/buildroot_show-var.patch) you can "make show-var
VARNAME=TARGETS" and check if the X packages are in the TARGETS.


2007/7/4, Nuno da Costa Ferro <nferro at nfive.com>:
Maybe I'm doing something wrong, but after selecting some X11R7 packets they
are not being compiled when I run make.


Kind regards,

Nuno da Costa Ferro
---------------------------
Number Five Software, S.A.
Development & IT Management
Email: nferro at nfive.com
DDI: +351 261 860 472
----- Original Message -----
From: "Nuno da Costa Ferro" < nferro at nfive.com>
To: "Julien Letessier" < julien.letessier at technosens.fr>; "Buildroot mailing
list" < buildroot at uclibc.org>
Sent: Wednesday, July 04, 2007 10:18 AM
Subject: Re: [Buildroot] X11R7 packages available


> Hi Julien.
>
> I'm getting this error when trying to go "make menuconfig":
> package/Config.xorg7.in:20: can't open file
> "package/pthread-stubs/Config.in"
>
> Then I comment that line and get:
> package/Config.xorg7.in:156: can't open file
> "package/openchrome/Config.in"
>
> After commenting that I am now compiling.
>
>
> Kind regards,
>
> Nuno da Costa Ferro
> ---------------------------
> Number Five Software, S.A.
> Development & IT Management
> Email: nferro at nfive.com
> DDI: +351 261 860 472
>
>
> ----- Original Message -----
> From: Julien Letessier
> To: Buildroot mailing list
> Sent: Wednesday, July 04, 2007 9:29 AM
> Subject: [Buildroot] X11R7 packages available
>
>
> Hi list,
>
> As promised, here is
> - a full set of X11R7 and support packages (including Mesa3D OpenGL, 2D
> and
> 3D drivers, Xv support)
> - an updated version (release 4) of the autotools patch
>
> The files are available from:
>   http://bazaar.mezis.net/buildroot_autotools4.patch.bz2
>   http://bazaar.mezis.net/buildroot_x11r7_v1.tar.bz2
> [because mailman won't let me attach them]
>
> Extract the archive, move packages to your buildroot package directory,
> and
> remember to add
>   source "package/Config.xorg7.in"
> to your package/Config.in
>
> Hopefully I didn't forget a dependancy package.
>
> Any feedback is welcome... once this is tested I think it would be a good
> idea to add the whole thing to Buildroot.
>
> Cheers,
> --
> Julien Letessier
> <julien.letessier at technosens.fr>
>
>
>
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot
>
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot
>





--
Julien Letessier
<julien.letessier at technosens.fr >





-- 
Julien Letessier
<julien.letessier at technosens.fr> 




More information about the buildroot mailing list