[Buildroot] U-boot 1.1.4 build error - Search First !

MikeW mw_phil at yahoo.co.uk
Tue May 15 15:19:02 UTC 2007


Anoop Krishnan <anoop.krishnan at ...> writes:

> 
> 
> Hi,
>  
>  
>  
> I have used crosstool-0.42 to build tool chain and 
> it builds the toolchain without any problems
>  
> and I can even compile the kernel Image with the 
> same cross-compiler perfectly
>  
> The probelm I am facing is that when I use the same 
> toolchain to compile U-boot 1.1.4, I getthe following error
>  
>
/opt/crosstool/gcc-4.1.0-glibc-2.4/arm-926ejs-linux-gnueabi/
lib/gcc/arm-926ejs-linux-gnueabi/4.1.0/libgcc.a(_dvmd_lnx.o):

> In function 
>
`__div0':/home/anoop/Tool_chain/crosstool-0.42/build/
arm-926ejs-linux-gnueabi/gcc-4.1.0-glibc-2.4/gcc-4.1.0/
gcc/config/arm/lib1funcs.asm:1000:

> undefined reference to `raise'make: *** [u-boot] Error 1
>  
> I found that raise is defined in raise.c which is 
> under the following 
>
path/home/anoop/Tool_chain/crosstool-0.42/build/
arm-926ejs-linux-gnueabi/gcc-4.1.0-glibc-2.4/glibc-2.4/signal/raise.c
and 
> its contents are as follows
>  
> #include <signal.h>#include 
> <errno.h>
>  
> /* Raise the signal SIG.  */intraise 
> (sig)     int sig;{  __set_errno 
> (ENOSYS);  return -1;}weak_alias (raise, gsignal)
>  
> stub_warning (raise)stub_warning 
> (gsignal)#include <stub-tag.h>
>  
> 
> How can I solve this issue? Is there any patch for glibc-2.4 , applying 
> which the issue can be solved?
> 
> Thanks in advance
> Anoop 

There's a thread here:
http://thread.gmane.org/gmane.comp.lib.uclibc.buildroot/248/focus=252
found by a Search on "undefined reference to raise"

Search the newsgroup first !!!!

Regards,
MikeW











More information about the buildroot mailing list