[Buildroot] Ignored patches - WHY?

[Ivan Kuten]

Rex Luscus wrote:
> Ok. This patch only change the dir of the bin of daemon.
> 
> Can you change this or you want that I make a new patch?
> 
> 
> PD: ok, ok, my english is HORRIBLE, but I don't use this too often for write, 
> only for read :-)
> 
> 
> Ivan Kuten escribió:
>> Sushi Sensei wrote:
>>   
>>> I have send some patches ( 0001534, 0001533, 0001532) this week with
>>> the Patch Tracking page, the week before I have send the same patches
>>> without notices of this inclusion or error, some patch was send 2 or 3
>>> week before and was ignored... There are some problem with this
>>> patches??
>>>     
>>
>> Hi Sushi,
>>
>> I'm sorry I can not apply this patch : br2-olsr.patch:
>>
>> Index: package/olsr/S50olsr
>> ===================================================================
>> --- package/olsr/S50olsr        (revisión: 20228)
>> +++ package/olsr/S50olsr        (copia de trabajo)
>> @@ -6,7 +6,7 @@
>>  case "$1" in
>>    start)
>>         echo "Starting OLSRd daemon: "
>> -       /usr/sbin/olsrd -d 0 -nofork &
>> +       /usr/bin/olsrd -d 0 -nofork &
>>         ;;
>>    stop)
>>         echo "Stopping OLSRd daemon: "
>>
>>   
> 

>>Because an daemon should reside in /usr/sbin directory ,
>>please check other buildroot packages such as dropbear, mdnsresponder, and so on - they are all in sbin dir.
>>You should change OLSR_TARGET_BINARY:=usr/bin/olsrd instead.

Unfortunately I could not manage to build OLSR correctly:

/opt/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-strip olsrd_dot_draw.so.0.3
install -D -m 755 olsrd_dot_draw.so.0.3 /usr/lib/olsrd_dot_draw.so.0.3; /sbin/ldconfig -n /usr/lib
install: cannot create regular file `/usr/lib/olsrd_dot_draw.so.0.3': Permission denied
...
make[2]: Entering directory `/opt/buildroot/build_arm/olsrd-0.5.3/lib/dyn_gw'
/opt/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-strip olsrd_dyn_gw.so.0.4
install -D -m 755 olsrd_dyn_gw.so.0.4 /usr/lib/olsrd_dyn_gw.so.0.4; /sbin/ldconfig -n /usr/lib
install: cannot create regular file `/usr/lib/olsrd_dyn_gw.so.0.4': Permission denied
make[2]: Leaving directory `/opt/buildroot/build_arm/olsrd-0.5.3/lib/dyn_gw'
...
 make[2]: Entering directory `/opt/buildroot/build_arm/olsrd-0.5.3/lib/secure'
/opt/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-strip olsrd_secure.so.0.5
install -D -m 755 olsrd_secure.so.0.5 /usr/lib/olsrd_secure.so.0.5; /sbin/ldconfig -n /usr/lib
install: cannot create regular file `/usr/lib/olsrd_secure.so.0.5': Permission denied
make[2]: Leaving directory `/opt/buildroot/build_arm/olsrd-0.5.3/lib/secure'

Could you provide a patch?

BR,
Ivan
--------------------------------
Embedded Linux engineer,
Promwad Company: http://www.promwad.com/
Homepage : http://www.ivankuten.com/
--------------------------------