[Buildroot] svn commit: trunk/buildroot/package/busybox

jacmet at uclibc.org jacmet at uclibc.org
Thu Jan 3 13:33:19 UTC 2008


Author: jacmet
Date: 2008-01-03 05:33:19 -0800 (Thu, 03 Jan 2008)
New Revision: 20701

Log:
busybox: Remove unused 1.7.0 patches



Removed:
   trunk/buildroot/package/busybox/busybox-1.7.0-gettimeofday_ns.patch
   trunk/buildroot/package/busybox/busybox-1.7.0-readlink.patch
   trunk/buildroot/package/busybox/busybox-1.7.0-targz_nommu.patch
   trunk/buildroot/package/busybox/busybox-1.7.0-trylink.patch


Changeset:
Deleted: trunk/buildroot/package/busybox/busybox-1.7.0-gettimeofday_ns.patch
===================================================================
--- trunk/buildroot/package/busybox/busybox-1.7.0-gettimeofday_ns.patch	2008-01-03 13:31:26 UTC (rev 20700)
+++ trunk/buildroot/package/busybox/busybox-1.7.0-gettimeofday_ns.patch	2008-01-03 13:33:19 UTC (rev 20701)
@@ -1,95 +0,0 @@
-diff -urN busybox-1.7.0/networking/isrv.c busybox-1.7.0-gettimeofday_ns/networking/isrv.c
---- busybox-1.7.0/networking/isrv.c	2007-08-24 11:49:41.000000000 +0100
-+++ busybox-1.7.0-gettimeofday_ns/networking/isrv.c	2007-09-06 17:39:55.000000000 +0100
-@@ -21,20 +21,6 @@
- 
- /* Helpers */
- 
--/* Even if _POSIX_MONOTONIC_CLOCK is defined, this
-- * may require librt */
--#if 0 /*def _POSIX_MONOTONIC_CLOCK*/
--static time_t monotonic_time(void)
--{
--	struct timespec ts;
--	if (clock_gettime(CLOCK_MONOTONIC, &ts) != 0)
--		time(&ts.tv_sec);
--	return ts.tv_sec;
--}
--#else
--#define monotonic_time() (time(NULL))
--#endif
--
- /* Opaque structure */
- 
- struct isrv_state_t {
-@@ -258,7 +244,7 @@
- 			/* this peer is gone */
- 			remove_peer(state, peer);
- 		} else if (TIMEOUT) {
--			TIMEO_TBL[peer] = monotonic_time();
-+			TIMEO_TBL[peer] = monotonic_sec();
- 		}
- 	}
- }
-@@ -335,7 +321,7 @@
- 			break;
- 
- 		if (timeout) {
--			time_t t = monotonic_time();
-+			time_t t = monotonic_sec();
- 			if (t != CURTIME) {
- 				CURTIME = t;
- 				handle_timeout(state, do_timeout);
-diff -urN busybox-1.7.0/runit/runsv.c busybox-1.7.0-gettimeofday_ns/runit/runsv.c
---- busybox-1.7.0/runit/runsv.c	2007-08-24 11:50:01.000000000 +0100
-+++ busybox-1.7.0-gettimeofday_ns/runit/runsv.c	2007-09-06 17:39:55.000000000 +0100
-@@ -33,6 +33,34 @@
- #include "libbb.h"
- #include "runit_lib.h"
- 
-+#if ENABLE_MONOTONIC_SYSCALL
-+#include <sys/syscall.h>
-+
-+/* libc has incredibly messy way of doing this,
-+ * typically requiring -lrt. We just skip all this mess */
-+static void gettimeofday_ns(struct timespec *ts)
-+{
-+	syscall(__NR_clock_gettime, CLOCK_REALTIME, ts);
-+}
-+#else
-+static void gettimeofday_ns(struct timespec *ts)
-+{
-+	if (sizeof(struct timeval) == sizeof(struct timespec)
-+	 && sizeof(((struct timeval*)ts)->tv_usec) == sizeof(ts->tv_nsec)
-+	) {
-+		/* Cheat */
-+		gettimeofday((void*)ts, NULL);
-+		ts->tv_nsec *= 1000;
-+	} else {
-+		extern void BUG_need_to_implement_gettimeofday_ns(void);
-+		BUG_need_to_implement_gettimeofday_ns();
-+	}
-+}
-+#endif
-+
-+/* Compare possibly overflowing unsigned counters */
-+#define LESS(a,b) ((int)((unsigned)(b) - (unsigned)(a)) > 0)
-+
- static int selfpipe[2];
- 
- /* state */
-@@ -126,14 +154,6 @@
- 	return 0;
- }
- 
--#define LESS(a,b) ((int)((unsigned)(b) - (unsigned)(a)) > 0)
--
--#include <sys/syscall.h>
--static void gettimeofday_ns(struct timespec *ts)
--{
--	syscall(__NR_clock_gettime, CLOCK_REALTIME, ts);
--}
--
- static void update_status(struct svdir *s)
- {
- 	ssize_t sz;

Deleted: trunk/buildroot/package/busybox/busybox-1.7.0-readlink.patch
===================================================================
--- trunk/buildroot/package/busybox/busybox-1.7.0-readlink.patch	2008-01-03 13:31:26 UTC (rev 20700)
+++ trunk/buildroot/package/busybox/busybox-1.7.0-readlink.patch	2008-01-03 13:33:19 UTC (rev 20701)
@@ -1,107 +0,0 @@
-diff -urN busybox-1.7.0/applets/applets.c busybox-1.7.0-readlink/applets/applets.c
---- busybox-1.7.0/applets/applets.c	2007-08-24 11:50:02.000000000 +0100
-+++ busybox-1.7.0-readlink/applets/applets.c	2007-09-06 17:41:38.000000000 +0100
-@@ -546,7 +546,7 @@
-  help:
- 		output_width = 80;
- 		if (ENABLE_FEATURE_AUTOWIDTH) {
--			/* Obtain the terminal width.  */
-+			/* Obtain the terminal width */
- 			get_terminal_width_height(0, &output_width, NULL);
- 		}
- 		/* leading tab and room to wrap */
-@@ -580,12 +580,11 @@
- 
- 	if (ENABLE_FEATURE_INSTALLER && strcmp(argv[1], "--install") == 0) {
- 		const char *busybox;
--		busybox = xmalloc_readlink_or_warn(bb_busybox_exec_path);
-+		busybox = xmalloc_readlink(bb_busybox_exec_path);
- 		if (!busybox)
- 			busybox = bb_busybox_exec_path;
- 		/* -s makes symlinks */
--		install_links(busybox,
--				 argv[2] && strcmp(argv[2], "-s") == 0);
-+		install_links(busybox, argv[2] && strcmp(argv[2], "-s") == 0);
- 		return 0;
- 	}
- 
-diff -urN busybox-1.7.0/include/libbb.h busybox-1.7.0-readlink/include/libbb.h
---- busybox-1.7.0/include/libbb.h	2007-08-24 11:49:55.000000000 +0100
-+++ busybox-1.7.0-readlink/include/libbb.h	2007-09-06 17:41:38.000000000 +0100
-@@ -248,9 +248,10 @@
- DIR *xopendir(const char *path);
- DIR *warn_opendir(const char *path);
- 
--char *xrealloc_getcwd_or_warn(char *cwd);
-+/* UNUSED: char *xmalloc_realpath(const char *path); */
-+char *xmalloc_readlink(const char *path);
- char *xmalloc_readlink_or_warn(const char *path);
--char *xmalloc_realpath(const char *path);
-+char *xrealloc_getcwd_or_warn(char *cwd);
- 
- 
- //TODO: signal(sid, f) is the same? then why?
-@@ -316,8 +317,8 @@
- };
- /* Create stream socket, and allocate suitable lsa.
-  * (lsa of correct size and lsa->sa.sa_family (AF_INET/AF_INET6))
-- * af == AF_UNSPEC will result in trying to create IPv6, and
-- * if kernel doesn't support it, IPv4.
-+ * af == AF_UNSPEC will result in trying to create IPv6 socket,
-+ * and if kernel doesn't support it, IPv4.
-  */
- int xsocket_type(len_and_sockaddr **lsap, USE_FEATURE_IPV6(int af,) int sock_type);
- int xsocket_stream(len_and_sockaddr **lsap);
-diff -urN busybox-1.7.0/libbb/xreadlink.c busybox-1.7.0-readlink/libbb/xreadlink.c
---- busybox-1.7.0/libbb/xreadlink.c	2007-08-24 11:49:51.000000000 +0100
-+++ busybox-1.7.0-readlink/libbb/xreadlink.c	2007-09-06 17:41:38.000000000 +0100
-@@ -10,8 +10,7 @@
-  * NOTE: This function returns a malloced char* that you will have to free
-  * yourself. You have been warned.
-  */
--
--char *xmalloc_readlink_or_warn(const char *path)
-+char *xmalloc_readlink(const char *path)
- {
- 	enum { GROWBY = 80 }; /* how large we will grow strings by */
- 
-@@ -20,20 +19,30 @@
- 
- 	do {
- 		buf = xrealloc(buf, bufsize += GROWBY);
--		readsize = readlink(path, buf, bufsize); /* 1st try */
-+		readsize = readlink(path, buf, bufsize);
- 		if (readsize == -1) {
--			bb_perror_msg("%s", path);
- 			free(buf);
- 			return NULL;
- 		}
--	}
--	while (bufsize < readsize + 1);
-+	} while (bufsize < readsize + 1);
- 
- 	buf[readsize] = '\0';
- 
- 	return buf;
- }
- 
-+char *xmalloc_readlink_or_warn(const char *path)
-+{
-+	char *buf = xmalloc_readlink(path);
-+	if (!buf) {
-+		/* EINVAL => "file: Invalid argument" => puzzled user */
-+		bb_error_msg("%s: cannot read link (not a symlink?)", path);
-+	}
-+	return buf;
-+}
-+
-+/* UNUSED */
-+#if 0
- char *xmalloc_realpath(const char *path)
- {
- #if defined(__GLIBC__) && !defined(__UCLIBC__)
-@@ -46,3 +55,4 @@
- 	return xstrdup(realpath(path, buf));
- #endif
- }
-+#endif

Deleted: trunk/buildroot/package/busybox/busybox-1.7.0-targz_nommu.patch
===================================================================
--- trunk/buildroot/package/busybox/busybox-1.7.0-targz_nommu.patch	2008-01-03 13:31:26 UTC (rev 20700)
+++ trunk/buildroot/package/busybox/busybox-1.7.0-targz_nommu.patch	2008-01-03 13:33:19 UTC (rev 20701)
@@ -1,282 +0,0 @@
-diff -urN busybox-1.7.0/archival/bbunzip.c busybox-1.7.0-targz_nommu/archival/bbunzip.c
---- busybox-1.7.0/archival/bbunzip.c	2007-08-24 11:49:45.000000000 +0100
-+++ busybox-1.7.0-targz_nommu/archival/bbunzip.c	2007-09-06 17:42:02.000000000 +0100
-@@ -298,7 +298,7 @@
- int unlzma_main(int argc, char **argv);
- int unlzma_main(int argc, char **argv)
- {
--	getopt32(argv, "c");
-+	getopt32(argv, "cf");
- 	argv += optind;
- 	/* lzmacat? */
- 	if (applet_name[4] == 'c')
-diff -urN busybox-1.7.0/archival/libunarchive/Kbuild busybox-1.7.0-targz_nommu/archival/libunarchive/Kbuild
---- busybox-1.7.0/archival/libunarchive/Kbuild	2007-08-24 11:49:45.000000000 +0100
-+++ busybox-1.7.0-targz_nommu/archival/libunarchive/Kbuild	2007-09-06 17:42:02.000000000 +0100
-@@ -35,36 +35,34 @@
- 	get_header_tar.o \
- 	filter_accept_list_reassign.o
- 
--# open_transformer uses fork(). Compile it only if absolutely necessary
- lib-$(CONFIG_RPM)                       += open_transformer.o
--lib-$(CONFIG_FEATURE_TAR_BZIP2)	        += open_transformer.o
--lib-$(CONFIG_FEATURE_TAR_LZMA)	        += open_transformer.o
--lib-$(CONFIG_FEATURE_TAR_GZIP)		+= open_transformer.o
--lib-$(CONFIG_FEATURE_TAR_COMPRESS)	+= open_transformer.o
--lib-$(CONFIG_FEATURE_DEB_TAR_GZ)	+= open_transformer.o
--lib-$(CONFIG_FEATURE_DEB_TAR_BZ2)	+= open_transformer.o
--lib-$(CONFIG_FEATURE_DEB_TAR_LZMA)	+= open_transformer.o
--
--lib-$(CONFIG_AR)			+= get_header_ar.o unpack_ar_archive.o
--lib-$(CONFIG_BUNZIP2)			+= decompress_bunzip2.o
--lib-$(CONFIG_UNLZMA)			+= decompress_unlzma.o
--lib-$(CONFIG_CPIO)			+= get_header_cpio.o
--lib-$(CONFIG_DPKG)			+= $(DPKG_FILES)
--lib-$(CONFIG_DPKG_DEB)			+= $(DPKG_FILES)
--lib-$(CONFIG_FEATURE_DEB_TAR_GZ)	+= $(GUNZIP_FILES) get_header_tar_gz.o
--lib-$(CONFIG_FEATURE_DEB_TAR_BZ2)	+= decompress_bunzip2.o get_header_tar_bz2.o
--lib-$(CONFIG_FEATURE_DEB_TAR_LZMA)	+= decompress_unlzma.o get_header_tar_lzma.o
--lib-$(CONFIG_GUNZIP)			+= $(GUNZIP_FILES)
--lib-$(CONFIG_FEATURE_GUNZIP_UNCOMPRESS)	+= decompress_uncompress.o
--lib-$(CONFIG_RPM2CPIO)			+= $(GUNZIP_FILES) get_header_cpio.o
--lib-$(CONFIG_RPM)			+= $(GUNZIP_FILES) get_header_cpio.o
--lib-$(CONFIG_FEATURE_RPM_BZ2)		+= decompress_bunzip2.o
--lib-$(CONFIG_TAR)			+= get_header_tar.o
--lib-$(CONFIG_FEATURE_TAR_BZIP2)		+= decompress_bunzip2.o get_header_tar_bz2.o
--lib-$(CONFIG_FEATURE_TAR_LZMA)		+= decompress_unlzma.o get_header_tar_lzma.o
--lib-$(CONFIG_FEATURE_TAR_GZIP)		+= $(GUNZIP_FILES) get_header_tar_gz.o
--lib-$(CONFIG_FEATURE_TAR_COMPRESS)	+= decompress_uncompress.o
--lib-$(CONFIG_UNCOMPRESS)		+= decompress_uncompress.o
--lib-$(CONFIG_UNZIP)			+= $(GUNZIP_FILES)
--lib-$(CONFIG_FEATURE_COMPRESS_USAGE)	+= decompress_bunzip2.o
-+lib-$(CONFIG_FEATURE_TAR_BZIP2)         += open_transformer.o
-+lib-$(CONFIG_FEATURE_TAR_LZMA)          += open_transformer.o
-+lib-$(CONFIG_FEATURE_TAR_GZIP)          += open_transformer.o
-+lib-$(CONFIG_FEATURE_TAR_COMPRESS)      += open_transformer.o
-+lib-$(CONFIG_FEATURE_DEB_TAR_GZ)        += open_transformer.o
-+lib-$(CONFIG_FEATURE_DEB_TAR_BZ2)       += open_transformer.o
-+lib-$(CONFIG_FEATURE_DEB_TAR_LZMA)      += open_transformer.o
- 
-+lib-$(CONFIG_AR)                        += get_header_ar.o unpack_ar_archive.o
-+lib-$(CONFIG_BUNZIP2)                   += decompress_bunzip2.o
-+lib-$(CONFIG_UNLZMA)                    += decompress_unlzma.o
-+lib-$(CONFIG_CPIO)                      += get_header_cpio.o
-+lib-$(CONFIG_DPKG)                      += $(DPKG_FILES)
-+lib-$(CONFIG_DPKG_DEB)                  += $(DPKG_FILES)
-+lib-$(CONFIG_FEATURE_DEB_TAR_GZ)        += $(GUNZIP_FILES) get_header_tar_gz.o
-+lib-$(CONFIG_FEATURE_DEB_TAR_BZ2)       += decompress_bunzip2.o get_header_tar_bz2.o
-+lib-$(CONFIG_FEATURE_DEB_TAR_LZMA)      += decompress_unlzma.o get_header_tar_lzma.o
-+lib-$(CONFIG_GUNZIP)                    += $(GUNZIP_FILES)
-+lib-$(CONFIG_FEATURE_GUNZIP_UNCOMPRESS) += decompress_uncompress.o
-+lib-$(CONFIG_RPM2CPIO)                  += $(GUNZIP_FILES) get_header_cpio.o
-+lib-$(CONFIG_RPM)                       += $(GUNZIP_FILES) get_header_cpio.o
-+lib-$(CONFIG_FEATURE_RPM_BZ2)           += decompress_bunzip2.o
-+lib-$(CONFIG_TAR)                       += get_header_tar.o
-+lib-$(CONFIG_FEATURE_TAR_BZIP2)         += decompress_bunzip2.o get_header_tar_bz2.o
-+lib-$(CONFIG_FEATURE_TAR_LZMA)          += decompress_unlzma.o get_header_tar_lzma.o
-+lib-$(CONFIG_FEATURE_TAR_GZIP)          += $(GUNZIP_FILES) get_header_tar_gz.o
-+lib-$(CONFIG_FEATURE_TAR_COMPRESS)      += decompress_uncompress.o
-+lib-$(CONFIG_UNCOMPRESS)                += decompress_uncompress.o
-+lib-$(CONFIG_UNZIP)                     += $(GUNZIP_FILES)
-+lib-$(CONFIG_FEATURE_COMPRESS_USAGE)    += decompress_bunzip2.o
-diff -urN busybox-1.7.0/archival/libunarchive/get_header_tar_bz2.c busybox-1.7.0-targz_nommu/archival/libunarchive/get_header_tar_bz2.c
---- busybox-1.7.0/archival/libunarchive/get_header_tar_bz2.c	2007-08-24 11:49:45.000000000 +0100
-+++ busybox-1.7.0-targz_nommu/archival/libunarchive/get_header_tar_bz2.c	2007-09-06 17:42:02.000000000 +0100
-@@ -11,7 +11,7 @@
- 	/* Can't lseek over pipes */
- 	archive_handle->seek = seek_by_read;
- 
--	archive_handle->src_fd = open_transformer(archive_handle->src_fd, unpack_bz2_stream);
-+	archive_handle->src_fd = open_transformer(archive_handle->src_fd, unpack_bz2_stream, "bunzip2", "bunzip2", "-cf", "-", NULL);
- 	archive_handle->offset = 0;
- 	while (get_header_tar(archive_handle) == EXIT_SUCCESS) /**/;
- 
-diff -urN busybox-1.7.0/archival/libunarchive/get_header_tar_gz.c busybox-1.7.0-targz_nommu/archival/libunarchive/get_header_tar_gz.c
---- busybox-1.7.0/archival/libunarchive/get_header_tar_gz.c	2007-08-24 11:49:45.000000000 +0100
-+++ busybox-1.7.0-targz_nommu/archival/libunarchive/get_header_tar_gz.c	2007-09-06 17:42:02.000000000 +0100
-@@ -8,19 +8,26 @@
- 
- char get_header_tar_gz(archive_handle_t *archive_handle)
- {
-+#if BB_MMU
- 	unsigned char magic[2];
-+#endif
- 
- 	/* Can't lseek over pipes */
- 	archive_handle->seek = seek_by_read;
- 
-+	/* Check gzip magic only if open_transformer will invoke unpack_gz_stream (MMU case).
-+	 * Otherwise, it will invoke an external helper "gunzip -cf" (NOMMU case) which will
-+	 * need the header. */
-+#if BB_MMU
- 	xread(archive_handle->src_fd, &magic, 2);
- 	if ((magic[0] != 0x1f) || (magic[1] != 0x8b)) {
- 		bb_error_msg_and_die("invalid gzip magic");
- 	}
- 
- 	check_header_gzip_or_die(archive_handle->src_fd);
-+#endif
- 
--	archive_handle->src_fd = open_transformer(archive_handle->src_fd, unpack_gz_stream);
-+	archive_handle->src_fd = open_transformer(archive_handle->src_fd, unpack_gz_stream, "gunzip", "gunzip", "-cf", "-", NULL);
- 	archive_handle->offset = 0;
- 	while (get_header_tar(archive_handle) == EXIT_SUCCESS) /**/;
- 
-diff -urN busybox-1.7.0/archival/libunarchive/get_header_tar_lzma.c busybox-1.7.0-targz_nommu/archival/libunarchive/get_header_tar_lzma.c
---- busybox-1.7.0/archival/libunarchive/get_header_tar_lzma.c	2007-08-24 11:49:45.000000000 +0100
-+++ busybox-1.7.0-targz_nommu/archival/libunarchive/get_header_tar_lzma.c	2007-09-06 17:42:02.000000000 +0100
-@@ -14,7 +14,7 @@
- 	/* Can't lseek over pipes */
- 	archive_handle->seek = seek_by_read;
- 
--	archive_handle->src_fd = open_transformer(archive_handle->src_fd, unpack_lzma_stream);
-+	archive_handle->src_fd = open_transformer(archive_handle->src_fd, unpack_lzma_stream, "unlzma", "unlzma", "-cf", "-", NULL);
- 	archive_handle->offset = 0;
- 	while (get_header_tar(archive_handle) == EXIT_SUCCESS) /**/;
- 
-diff -urN busybox-1.7.0/archival/libunarchive/open_transformer.c busybox-1.7.0-targz_nommu/archival/libunarchive/open_transformer.c
---- busybox-1.7.0/archival/libunarchive/open_transformer.c	2007-08-24 11:49:45.000000000 +0100
-+++ busybox-1.7.0-targz_nommu/archival/libunarchive/open_transformer.c	2007-09-05 12:28:55.000000000 +0100
-@@ -7,27 +7,48 @@
- #include "unarchive.h"
- 
- /* transformer(), more than meets the eye */
-+/*
-+ * On MMU machine, the transform_prog and ... are stripped
-+ * by a macro in include/unarchive.h. On NOMMU, transformer is stripped.
-+ */
- int open_transformer(int src_fd,
--	USE_DESKTOP(long long) int (*transformer)(int src_fd, int dst_fd))
-+	USE_DESKTOP(long long) int (*transformer)(int src_fd, int dst_fd),
-+	const char *transform_prog, ...)
- {
- 	int fd_pipe[2];
- 	int pid;
- 
- 	xpipe(fd_pipe);
- 
-+#if BB_MMU
- 	pid = fork();
--	if (pid == -1) {
-+#else
-+	pid = vfork();
-+#endif
-+	if (pid == -1)
- 		bb_perror_msg_and_die("fork failed");
--	}
- 
- 	if (pid == 0) {
-+#if !BB_MMU
-+		va_list ap;
-+#endif
- 		/* child process */
- 		close(fd_pipe[0]); /* We don't wan't to read from the parent */
- 		// FIXME: error check?
-+#if BB_MMU
- 		transformer(src_fd, fd_pipe[1]);
--		close(fd_pipe[1]); /* Send EOF */
--		close(src_fd);
-+		if (ENABLE_FEATURE_CLEAN_UP) {
-+			close(fd_pipe[1]); /* Send EOF */
-+			close(src_fd);
-+		}
- 		exit(0);
-+#else
-+		xmove_fd(src_fd, 0);
-+		xmove_fd(fd_pipe[1], 1);
-+		va_start(ap, transform_prog);
-+		BB_EXECVP(transform_prog, ap);
-+		bb_perror_and_die("exec failed");
-+#endif
- 		/* notreached */
- 	}
- 
-diff -urN busybox-1.7.0/archival/rpm.c busybox-1.7.0-targz_nommu/archival/rpm.c
---- busybox-1.7.0/archival/rpm.c	2007-08-24 11:49:45.000000000 +0100
-+++ busybox-1.7.0-targz_nommu/archival/rpm.c	2007-09-06 17:42:02.000000000 +0100
-@@ -187,9 +187,15 @@
- 
- static void extract_cpio_gz(int fd)
- {
--	USE_DESKTOP(long long) int (*xformer)(int src_fd, int dst_fd);
- 	archive_handle_t *archive_handle;
- 	unsigned char magic[2];
-+#if BB_MMU
-+	USE_DESKTOP(long long) int (*xformer)(int src_fd, int dst_fd);
-+	enum { xformer_prog = 0 };
-+#else
-+	enum { xformer = 0 };
-+	const char *xformer_prog;
-+#endif
- 
- 	/* Initialize */
- 	archive_handle = init_handle();
-@@ -202,11 +208,19 @@
- 	archive_handle->offset = 0;
- 
- 	xread(archive_handle->src_fd, &magic, 2);
-+#if BB_MMU
- 	xformer = unpack_gz_stream;
-+#else
-+	xformer_prog = "gunzip";
-+#endif
- 	if ((magic[0] != 0x1f) || (magic[1] != 0x8b)) {
- 		if (ENABLE_FEATURE_RPM_BZ2
- 		 && (magic[0] == 0x42) && (magic[1] == 0x5a)) {
-+#if BB_MMU
- 			xformer = unpack_bz2_stream;
-+#else
-+			xformer_prog = "bunzip2";
-+#endif
- 	/* We can do better, need modifying unpack_bz2_stream to not require
- 	 * first 2 bytes. Not very hard to do... I mean, TODO :) */
- 			xlseek(archive_handle->src_fd, -2, SEEK_CUR);
-@@ -214,11 +228,17 @@
- 			bb_error_msg_and_die("no gzip"
- 				USE_FEATURE_RPM_BZ2("/bzip")
- 				" magic");
--	} else
-+	} else {
- 		check_header_gzip_or_die(archive_handle->src_fd);
-+#if !BB_MMU
-+		/* NOMMU version of open_transformer execs an external unzipper that should
-+		 * have the file position at the start of the file */
-+		xlseek(archive_handle->src_fd, 0, SEEK_SET);
-+#endif
-+	}
- 
- 	xchdir("/"); /* Install RPM's to root */
--	archive_handle->src_fd = open_transformer(archive_handle->src_fd, xformer);
-+	archive_handle->src_fd = open_transformer(archive_handle->src_fd, xformer, xformer_prog, xformer_prog, "-cf", "-", NULL);
- 	archive_handle->offset = 0;
- 	while (get_header_cpio(archive_handle) == EXIT_SUCCESS)
- 		continue;
-diff -urN busybox-1.7.0/archival/tar.c busybox-1.7.0-targz_nommu/archival/tar.c
---- busybox-1.7.0/archival/tar.c	2007-08-24 11:49:45.000000000 +0100
-+++ busybox-1.7.0-targz_nommu/archival/tar.c	2007-09-06 17:42:02.000000000 +0100
-@@ -648,7 +648,7 @@
- 		bb_error_msg_and_die("invalid magic");
- 	}
- 
--	archive_handle->src_fd = open_transformer(archive_handle->src_fd, uncompress);
-+	archive_handle->src_fd = open_transformer(archive_handle->src_fd, uncompress, "uncompress", "uncompress", "-cf", "-", NULL);
- 	archive_handle->offset = 0;
- 	while (get_header_tar(archive_handle) == EXIT_SUCCESS)
- 		/* nothing */;
-diff -urN busybox-1.7.0/include/unarchive.h busybox-1.7.0-targz_nommu/include/unarchive.h
---- busybox-1.7.0/include/unarchive.h	2007-08-24 11:49:55.000000000 +0100
-+++ busybox-1.7.0-targz_nommu/include/unarchive.h	2007-09-06 17:42:02.000000000 +0100
-@@ -115,7 +115,13 @@
- extern USE_DESKTOP(long long) int unpack_gz_stream(int src_fd, int dst_fd);
- extern USE_DESKTOP(long long) int unpack_lzma_stream(int src_fd, int dst_fd);
- 
-+#if BB_MMU
- extern int open_transformer(int src_fd,
- 	USE_DESKTOP(long long) int (*transformer)(int src_fd, int dst_fd));
-+#define open_transformer(src_fd, transformer, transform_prog, ...) open_transformer(src_fd, transformer)
-+#else
-+extern int open_transformer(int src_fd, const char *transform_prog, ...);
-+#define open_transformer(src_fd, transformer, transform_prog, ...) open_transformer(src_fd, transform_prog, __VA_ARGS__)
-+#endif
- 
- #endif

Deleted: trunk/buildroot/package/busybox/busybox-1.7.0-trylink.patch
===================================================================
--- trunk/buildroot/package/busybox/busybox-1.7.0-trylink.patch	2008-01-03 13:31:26 UTC (rev 20700)
+++ trunk/buildroot/package/busybox/busybox-1.7.0-trylink.patch	2008-01-03 13:33:19 UTC (rev 20701)
@@ -1,89 +0,0 @@
-diff -urN busybox-1.7.0/scripts/trylink busybox-1.7.0-trylink/scripts/trylink
---- busybox-1.7.0/scripts/trylink	2007-08-24 11:49:43.000000000 +0100
-+++ busybox-1.7.0-trylink/scripts/trylink	2007-09-03 12:08:18.000000000 +0100
-@@ -14,37 +14,30 @@
- BBOX_LIB_LIST=`echo "$BBOX_LIB_LIST" | xargs -n1 | sort | uniq | xargs`
- 
- # First link with all libs. If it fails, bail out
--l_list=`echo "$BBOX_LIB_LIST" | sed -e 's/ / -l/g' -e 's/^/-l/'`
- echo "Trying libraries: $BBOX_LIB_LIST"
--try "-Wl,--start-group $l_list -Wl,--end-group" "$@" \
-+l_list=`echo "$BBOX_LIB_LIST" | sed -e 's/ / -l/g' -e 's/^/-l/' -e 's/^-l$//'`
-+test "x$l_list" != "x" && l_list="-Wl,--start-group $l_list -Wl,--end-group"
-+try "$l_list" "$@" \
- || {
-     echo "Failed: $* -Wl,--start-group $l_list -Wl,--end-group"
-     cat busybox_ld.err
-     exit 1
- }
- 
--#### Hack disabled: conflicts with ld --verbose flag in last link phase
--
--##### Hack: we are not supposed to know executable name,
--##### but this hack cuts down link time
--####mv busybox_unstripped busybox_unstripped.tmp
--####mv busybox.map        busybox.map.tmp
--
- # Now try to remove each lib and build without it.
- # Stop when no lib can be removed.
--####ever_discarded=false
- while test "$BBOX_LIB_LIST"; do
-     $debug && echo "Trying libraries: $BBOX_LIB_LIST"
-     all_needed=true
-     for one in $BBOX_LIB_LIST; do
- 	without_one=`echo " $BBOX_LIB_LIST " | sed "s/ $one / /g" | xargs`
--	l_list=`echo "$without_one" | sed -e 's/ / -l/g' -e 's/^/-l/'`
--	$debug && echo "Trying -l options: $l_list"
--	if try "-Wl,--start-group $l_list -Wl,--end-group" "$@"; then
-+	l_list=`echo "$without_one" | sed -e 's/ / -l/g' -e 's/^/-l/' -e 's/^-l$//'`
-+	test "x$l_list" != "x" && l_list="-Wl,--start-group $l_list -Wl,--end-group"
-+	$debug && echo "Trying -l options: '$l_list'"
-+	if try "$l_list" "$@"; then
- 		echo "Library $one is not needed"
- 		BBOX_LIB_LIST="$without_one"
- 		all_needed=false
--####		ever_discarded=true
- 	else
- 		echo "Library $one is needed"
- 	fi
-@@ -57,24 +50,19 @@
-     #{ echo "$BBOX_LIB_LIST" | grep -q ' '; } || break
- done
- 
--####mv busybox_unstripped.tmp busybox_unstripped
--####mv busybox.map.tmp        busybox.map
--####$ever_discarded && {
--    # Make the binary with final, minimal list of libs
--    echo "Final link with: $BBOX_LIB_LIST"
--    l_list=`echo "$BBOX_LIB_LIST" | sed -e 's/ / -l/g' -e 's/^/-l/'`
--    # --verbose gives us gobs of info to stdout (e.g. linker script used)
--    if ! test -f busybox_ldscript; then
--	try "-Wl,--start-group $l_list -Wl,--end-group -Wl,--verbose" "$@" >busybox_ld.out ####|| exit 1
--    else
--	echo "Custom linker script 'busybox_ldscript' found, using it"
--	# Add SORT_BY_ALIGNMENT to linker script (found in busybox_ld.out):
--	#  .rodata         : { *(.rodata SORT_BY_ALIGNMENT(.rodata.*) .gnu.linkonce.r.*) }
--	#  *(.data SORT_BY_ALIGNMENT(.data.*) .gnu.linkonce.d.*)
--	#  *(.bss SORT_BY_ALIGNMENT(.bss.*) .gnu.linkonce.b.*)
--	# This will eliminate most of the data padding (~3kb).
--	try "-Wl,--start-group $l_list -Wl,--end-group -Wl,--verbose -Wl,-T -Wl,busybox_ldscript" "$@" >busybox_ld.out
--    fi
--####}
--####rm busybox_ld.err
--####exit 0  # Ensure "success" exit code
-+# Make the binary with final, minimal list of libs
-+echo "Final link with: $BBOX_LIB_LIST"
-+l_list=`echo "$BBOX_LIB_LIST" | sed -e 's/ / -l/g' -e 's/^/-l/' -e 's/^-l$//'`
-+test "x$l_list" != "x" && l_list="-Wl,--start-group $l_list -Wl,--end-group -Wl,--verbose"
-+# --verbose gives us gobs of info to stdout (e.g. linker script used)
-+if ! test -f busybox_ldscript; then
-+    try "$l_list -Wl,--verbose" "$@" >busybox_ld.out
-+else
-+    echo "Custom linker script 'busybox_ldscript' found, using it"
-+    # Add SORT_BY_ALIGNMENT to linker script (found in busybox_ld.out):
-+    #  .rodata         : { *(.rodata SORT_BY_ALIGNMENT(.rodata.*) .gnu.linkonce.r.*) }
-+    #  *(.data SORT_BY_ALIGNMENT(.data.*) .gnu.linkonce.d.*)
-+    #  *(.bss SORT_BY_ALIGNMENT(.bss.*) .gnu.linkonce.b.*)
-+    # This will eliminate most of the data padding (~3kb).
-+    try "$l_list -Wl,--verbose -Wl,-T -Wl,busybox_ldscript" "$@" >busybox_ld.out
-+fi




More information about the buildroot mailing list