[Buildroot] error messages

[Jonathan Dumaresq]

I replace it with a mDNS routine because if you look at it, it use the
memset function like you suggest to me. If you prefer to have the memset
directly in the code, I will change it. 

Regards

Jonathan
-----Message d'origine-----
De : Ulf Samuelsson [mailto:ulf at atmel.com] 
Envoyé : 14 janvier 2008 18:21
À : Jonathan Dumaresq
Objet : Re: [Buildroot] error messages


Here the result patch.

I hope I done the right thing. This is my first patch !!!

Even with the correction I always have errors. 

Jonathan

==> No, you are replacing the bzero with an mDNS specific routine,
        and you should use the uClibc routine I proposed.

        Best Regards
        Ulf Samuelsson


-----Message d'origine-----
De : Ulf Samuelsson [mailto:ulf at atmel.com] 
Envoyé : 14 janvier 2008 14:52
À : Jonathan Dumaresq; buildroot at uclibc.org
Objet : Re: [Buildroot] error messages

> Hi,

> This is not something that i'm normaly do on a daily basis. So I have the
> file modified, but I'm try to make a patch. I try with svn diff, but
thoses
> file are not part of the svn. So what is the best way of providing a
working
> patch ?
> Regards
> Jonathan


==>

$ svn add <file>
$ svn diff

    or create two trees and do

$    diff -urN <original tree> <new tree>    >   mychanges.patch




Best Regards
Ulf Samuelsson                ulf at atmel.com
Atmel Nordic AB
Mail:  Box 2033, 174 02 Sundbyberg, Sweden
Visit:  Kavallerivägen 24, 174 58 Sundbyberg, Sweden
Phone +46 (8) 441 54 22     Fax +46 (8) 441 54 29
GSM    +46 (706) 22 44 57