[Buildroot] I really need some help
Ulf Samuelsson
ulf.samuelsson at atmel.com
Thu Mar 6 07:51:33 UTC 2008
> I have been trying for the past 2+ months to successfully complete a
> buildroot session for a AT91SAM9260EK. I first installed buildroot via
> svn. Then I then did a "make at91sam9260pf_defconfig" to get baseline
> config files.
The "pf" is for parallel flash and will not work on the EK since it does not have any parallel flash.
You should use "make at91sam9260dfc_defconfig" and a dataflash card for this board.
If you want to use the internal dataflash, then you need to fix U-Boot and at91bootstrap,
but it might be easier to download the binaries from www.linux4sam.org
Is "SuperModem-2.6.22.1" your project name?
For: "atd.c:498:2: error: #error "No mail command specified." error message:
If you do not need the "at" package, you can just disable it in menuconfig.
If you need it, then you need to look at "atd.c" somewhere
in the build_arm_wchar/at-3.1.10 to find out why you get the error message.
You should also ensure that the files
/etc/shadow
/etc/passwd
/usr/share/udhcpc/default.script
are in your root file system.
> Then I ran a "make configured" in order to get a baseline
> codeset. I ran "make menuconfig" in the kernel directory in order to
> update the kernel config from what defconfig installed, otherwise I kept
> getting prompted about missing config info during the make. The only
> change I made to the kernel config was to add USB ACM support so I could
> talk to a USB wireless module. I have tried both 2.6.22.1 and 2.6.22.10
> kernels.
Best Regards
Ulf Samuelsson ulf at atmel.com
More information about the buildroot
mailing list