[Buildroot] Application execution fails (John Voltz)

[Muktabh Anchlia]

Hi John,
I still get the same error...

" I don't take sides, just the racing line "

> 
> Message: 1
> Date: Fri, 9 May 2008 17:46:31 +0000
> From: Muktabh Anchlia <m_anchlia at hotmail.com>
> Subject: [Buildroot] Application execution fails
> To: <buildroot at uclibc.org>
> Message-ID: <BAY107-W3500673BC0EFE93C658FB49DD30 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> 
> Hello,
> I compiled a cross tool chain for AMD geode processor using buildroot. I wanted to test the cross tools, so wrote a simple hello world application, exported the ...staging-dir/usr/bin/ path and compiled the C code using i686-linux-uclibc-gcc. 
> 
> When I run this program on the host machine, it gives me "bad ELF interpreter" as expected. But when I run it on the target, it gives me the following error
> "syntax error: "(" unexpected"
> I couldn't figure out where I am going wrong.
> Any help would be appreciated.
> 
> Thanks
> Muktabh
> 
> " I don't take sides, just the racing line "
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://busybox.net/lists/buildroot/attachments/20080509/8ff756a8/attachment.html 
> 
> ------------------------------
> 
> Message: 2
> Date: Fri, 9 May 2008 14:26:43 -0400
> From: "John Voltz" <john.voltz at gmail.com>
> Subject: Re: [Buildroot] Application execution fails
> To: "Buildroot List" <buildroot at uclibc.org>
> Message-ID:
> 	<46a136670805091126t2047cf96gef83119ccd45ab13 at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> try:
> 
> /path/to/buildroot/build_i686/staging_dir/usr/bin/i686-linux-uclibc-gcc
> -I/path/to/buildroot/build_i686/staging_dir/usr/include
> -L/path/to/buildroot/build_i686/staging_dir/usr/lib -lc hello_world.c -o
> hello_world
> 
> 
> 
> On Fri, May 9, 2008 at 1:46 PM, Muktabh Anchlia <m_anchlia at hotmail.com>
> wrote:
> 
> >  Hello,
> > I compiled a cross tool chain for AMD geode processor using buildroot. I
> > wanted to test the cross tools, so wrote a simple hello world application,
> > exported the ...staging-dir/usr/bin/ path and compiled the C code using
> > i686-linux-uclibc-gcc.
> >
> > When I run this program on the host machine, it gives me "bad ELF
> > interpreter" as expected. But when I run it on the target, it gives me the
> > following error
> > "syntax error: "(" unexpected"
> > I couldn't figure out where I am going wrong.
> > Any help would be appreciated.
> >
> > Thanks
> > Muktabh
> >
> > *" I don't take sides, just the racing line "*
> >
> > _______________________________________________
> > buildroot mailing list
> > buildroot at uclibc.org
> > http://busybox.net/mailman/listinfo/buildroot
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://busybox.net/lists/buildroot/attachments/20080509/d2673767/attachment-0001.htm 
> 
> ------------------------------
> 
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot
> 
> End of buildroot Digest, Vol 23, Issue 20
> *****************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20080509/de0130cb/attachment.html>