[Buildroot] Encountered BusyBox error during ARM build

[Arun Reddy]

Hi Chris,

Just letting you know doing a "make clean" within the uclibc directory did
solve the problem. Thanks a lot!

Arun

On Mon, May 19, 2008 at 8:39 AM, Christopher Taylor <chtaylo3 at gmail.com>
wrote:

> Yes, absolutely.  Anytime you make a change in uclibc you will
> probably have to recompile everything.
>
> Try that and write back.
>
> -Chris
>
> On Thu, May 15, 2008 at 7:44 PM, Arun Reddy <reddyac at gmail.com> wrote:
> > Hi Chris,
> >
> > I suspected it had to do with my previous error, but the thing is I had
> > already done a make clean on BusyBox earlier and found that it did not
> solve
> > this problem. I did do a "make distclean", which I believe gets rid of
> > everything "./configure" has built, but found no success.
> >
> > Before I do it, do you think I should clean uclibc as well since I did
> > happen to change LFS in the uclibc menuconfig? Thanks for the help!
> >
> > On Thu, May 15, 2008 at 4:23 PM, Christopher Taylor <chtaylo3 at gmail.com>
> > wrote:
> >>
> >> This is related to your previous post.  You'll have to do a make clean
> >> or a make dist-clean inside busybox.
> >> for you that's
> >>
> >> cd /root/buildroot/project_build_arm/uclibc/busybox-1.10.2
> >> make dist-clean
> >> cd -
> >> make
> >>
> >> If that doesn't work, write back.
> >>
> >> HTH!
> >> Chris
> >>
> >> On Thu, May 15, 2008 at 3:16 PM, Arun Reddy <reddyac at gmail.com> wrote:
> >> > Hi everyone,
> >> >
> >> > Going through the build process for ARM, I have encountered a problem
> >> > with
> >> > BusyBox which I am not sure if I am isolating correctly. The error is
> >> > mentioned here:
> >> >
> >> > http://img386.imageshack.us/img386/2225/busyboxerrorlb2.jpg
> >> >
> >> > It looks like fstat64, lstat64 and stat64 have undefined references,
> >> > which
> >> > are probably a result of something earlier failing. I was wondering if
> >> > this
> >> > is a problem with my BusyBox configuration in particular, or is it a
> >> > common
> >> > problem you guys have encountered when using Buildroot in general? I
> >> > looked
> >> > online and there was a mention about defining STAT64_SUPPORT, but I
> >> > found no
> >> > explanation on what it does or where it is located, so I thought I
> would
> >> > get
> >> > some clarification here. Thank you!
> >> >
> >> > _______________________________________________
> >> > buildroot mailing list
> >> > buildroot at uclibc.org
> >> > http://busybox.net/mailman/listinfo/buildroot
> >> >
> >> _______________________________________________
> >> buildroot mailing list
> >> buildroot at uclibc.org
> >> http://busybox.net/mailman/listinfo/buildroot
> >
> >
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20080519/2bc5a69b/attachment-0001.html>