[Buildroot] svn commit: trunk/buildroot/target/u-boot

[Peter Korsgaard]

>>>>> "ulf" == ulf  <ulf at uclibc.org> writes:

 ulf> Author: ulf
 ulf> Date: 2009-01-03 00:00:46 +0000 (Sat, 03 Jan 2009)
 ulf> New Revision: 24652

 ulf> Log:
 ulf> Add Memory configuration to U-Boot build, remove some debugging info

 ulf> Modified:
 ulf>    trunk/buildroot/target/u-boot/Makefile.in


 ulf> Changeset:
 ulf> Modified: trunk/buildroot/target/u-boot/Makefile.in
 ulf> ===================================================================
 ulf> --- trunk/buildroot/target/u-boot/Makefile.in	2009-01-02 20:31:44 UTC (rev 24651)
 ulf> +++ trunk/buildroot/target/u-boot/Makefile.in	2009-01-03 00:00:46 UTC (rev 24652)
 ulf> @@ -42,8 +42,9 @@
 ulf>  @echo "#ifdef $(strip $(1))" >> $(U_BOOT_INC_CONF_FILE)
 ulf>  @echo "#undef $(strip $(1))" >> $(U_BOOT_INC_CONF_FILE)
 ulf>  @echo "#endif" >> $(U_BOOT_INC_CONF_FILE)
 ulf> - at echo '#define $(strip $(1)) $(2)' >> $(U_BOOT_INC_CONF_FILE)
 ulf> + at echo '#define $(strip $(1)) $(strip $(subst ",,$(2)))' >> $(U_BOOT_INC_CONF_FILE)

What is this for and why isn't it mentioned in the commit message?
 
 ulf>  $(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured
 ulf>  	# Modify configuration header in $(U_BOOT_INC_CONF_FILE)
 ulf> -	
 ulf>  	@echo >> $(U_BOOT_INC_CONF_FILE)
 ulf>  	@echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE)
 ulf>  	@echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
 ulf>  	@echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
 ulf> +	$(call insert_define, DATE, $(DATE))	
 ulf> +	$(call insert_define, CONFIG_LOAD_SCRIPTS, 1)

What is this? I don't find the string CONFIG_LOAD_SCRIPTS in U-boot.

 ulf>  ifneq ($(strip $(BR2_PROJECT)),"")
 ulf>  	$(call insert_define, CONFIG_HOSTNAME, $(BR2_PROJECT))
 ulf>  endif
 ulf> -ifneq ($(strip $(BR2_TARGET_UBOOT_SERVERIP)),"")
 ulf> -	$(call insert_define, CONFIG_SERVERIP, $(BR2_TARGET_UBOOT_SERVERIP))
 ulf> -endif
 ulf> -

Why is this gone?

 ulf>  ifneq ($(strip $(BR2_TARGET_UBOOT_IPADDR)),"")
 ulf>  	$(call insert_define, CONFIG_IPADDR, $(BR2_TARGET_UBOOT_IPADDR))
 ulf>  ifneq ($(strip $(BR2_TARGET_UBOOT_GATEWAY)),"")
 ulf> @@ -101,22 +99,51 @@
 ulf>  	$(call insert_define, CONFIG_NETMASK, $(BR2_TARGET_UBOOT_NETMASK))
 ulf>  endif
 ulf>  endif # end BR2_TARGET_U_BOOT_IPADDR
 ulf> -
 ulf> +ifneq ($(strip $(BR2_TARGET_UBOOT_SERVERIP)),"")
 ulf> +	$(call insert_define, CONFIG_SERVERIP, $(BR2_TARGET_UBOOT_SERVERIP))
 ulf> +endif

Why the move?

 ulf>  ifneq ($(strip $(BR2_TARGET_UBOOT_ETHADDR)),"")
 ulf>  	$(call insert_define, CONFIG_ETHADDR, $(BR2_TARGET_UBOOT_ETHADDR))
 ulf>  endif
 ulf> +ifneq ($(strip $(BR2_TARGET_UBOOT_ETH1ADDR)),)
 ulf>  ifneq ($(strip $(BR2_TARGET_UBOOT_ETH1ADDR)),"")
 ulf> -	$(call insert_define, CONFIG_ETH2ADDR, $(BR2_TARGET_UBOOT_ETH1ADDR))
 ulf> +	$(call insert_define, CONFIG_ETH1ADDR, $(BR2_TARGET_UBOOT_ETH1ADDR))

Huh? Why does the ETH1ADDR thingy depend on AVR32 in the first place?

 ulf>  endif
 ulf> +endif
 ulf> +ifneq ($(strip $(BR2_TARGET_UBOOT_BOOTARGS)),)
 ulf>  ifneq ($(strip $(BR2_TARGET_UBOOT_BOOTARGS)),"")
 ulf>  	$(call insert_define, CONFIG_BOOTARGS, $(BR2_TARGET_UBOOT_BOOTARGS))
 ulf>  endif
 ulf> +endif

What is this BOOTARGS thing? It's not in Config.in

 ulf> +ifneq ($(strip $(BR2_TARGET_UBOOT_BOOTCMD)),)
 ulf>  ifneq ($(strip $(BR2_TARGET_UBOOT_BOOTCMD)),"")
 ulf>  	$(call insert_define, CONFIG_BOOTCOMMAND, $(BR2_TARGET_UBOOT_BOOTCMD))
 ulf>  endif
 ulf> +endif

Neither is this.

 ulf>  ifeq ($(BR2_TARGET_UBOOT_SILENT),y)
 ulf>  	$(call insert_define, CONFIG_SILENT_CONSOLE,)
 ulf>  endif
 ulf> +ifneq ($(strip $(BR2_TARGET_UBOOT_KERNEL_START)),"")
 ulf> +	$(call insert_define, KERNEL_START, $(BR2_TARGET_UBOOT_KERNEL_START))
 ulf> +endif
 ulf> +ifneq ($(strip $(BR2_TARGET_UBOOT_KERNEL_LOCATION)),"")
 ulf> +	$(call insert_define, KERNEL_LOCATION, $(BR2_TARGET_UBOOT_KERNEL_LOCATION))
 ulf> +endif
 ulf> +ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_START)),"")
 ulf> +	$(call insert_define, FILESYSTEM_START, $(BR2_TARGET_UBOOT_FILESYSTEM_START))
 ulf> +endif
 ulf> +ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_LOCATION)),"")
 ulf> +	$(call insert_define, FILESYSTEM_LOCATION, $(BR2_TARGET_UBOOT_FILESYSTEM_LOCATION))
 ulf> +endif
 ulf> +ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_SIZE)),"")
 ulf> +	$(call insert_define, FILESYSTEM_SIZE, $(BR2_TARGET_UBOOT_FILESYSTEM_SIZE))
 ulf> +endif
 ulf> +ifneq ($(strip $(BR2_TARGET_UBOOT_END_OF_FLASH)),"")
 ulf> +	$(call insert_define, END_OF_FLASH, $(BR2_TARGET_UBOOT_END_OF_FLASH))
 ulf> +endif
 ulf> +ifneq ($(strip $(BR2_TARGET_UBOOT_MEMORY_SIZE)),"")
 ulf> +	$(call insert_define, MEMORY_SIZE, $(BR2_TARGET_UBOOT_MEMORY_SIZE))
 ulf> +endif

Huh, that sounds like a very target specific things - And you seem to
have forgotten to add those config settings to Config.in

 ulf> -	@echo BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD=$(BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD)
 ulf> -	@echo BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM=$(BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM)
 ulf>  	@echo UBOOT_BOARD_NAME=$(UBOOT_BOARD_NAME)
 ulf>  	@echo TEST=$(TEST)
 ulf>  	@exit 0

You still didn't get rid of that TEST thing.

Please clean up.

-- 
Bye, Peter Korsgaard