[Buildroot] [git commit master] Makefile: cleanup *clean targets

Michael S. Zick minimod at morethan.org
Fri Nov 20 14:08:57 UTC 2009


On Fri November 20 2009, Peter Korsgaard wrote:
> 
> commit: http://git.buildroot.net/buildroot/commit/?id=406053d5dc2e44b908ce77404c2750ef8b45dc11
> branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
> 
> As discussed on the list, fixup the *clean targets, so we now have:
> 

a newbee here, I missed that discussion -
one question in-lined below:

> clean: remove all generated files (E.G. everything in output/)
> distclean: same as clean, but also remove the kconfig build and .config
> 
> Also tweak 'make help' output to match. This also merges the two
> different clean / distclean targets we had depending on if there was
> a .config present or not (most variables are not defined for !.config
> case, so E.G. the clean target ends up being a noop).
> 
> Signed-off-by: Peter Korsgaard <jacmet at sunsite.dk>
> ---
>  CHANGES  |    5 +++++
>  Makefile |   41 ++++++++++++++---------------------------
>  2 files changed, 19 insertions(+), 27 deletions(-)
> 
> diff --git a/CHANGES b/CHANGES
> index 1da84d8..c46b129 100644
> --- a/CHANGES
> +++ b/CHANGES
> @@ -1,5 +1,10 @@
>  2009.11, Not yet released:
>  
> +	Fixed *clean targets. Now clean removes everything generated,
> +	so you can do a fresh rebuild. Distclean furthermore removes
> +	kbuild tools and .config, bringing the source tree back in a
> +	pristine state.
> +
>  	Toolchain: ARM cortex A8 support, GCC 4.4.2.
>  
>  	New packages: divine, gvfs, libarchive, libmicrohttpd,
> diff --git a/Makefile b/Makefile
> index bbd49d4..018cf6d 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -338,7 +338,7 @@ $(BASE_TARGETS): dirs
>  world: dependencies dirs $(BASE_TARGETS) $(TARGETS_ALL)
>  
>  
> -.PHONY: all world dirs clean dirclean distclean source \
> +.PHONY: all world dirs clean distclean source \
>  	$(BASE_TARGETS) $(TARGETS) $(TARGETS_ALL) \
>  	$(TARGETS_CLEAN) $(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) \
>  	$(DL_DIR) $(TOOLCHAIN_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
> @@ -439,25 +439,6 @@ external-deps:
>  	@$(MAKE) -Bs BR2_WGET=$(TOPDIR)/toolchain/wget-show-external-deps.sh \
>  		SPIDER=--spider source
>  
> -#############################################################
> -#
> -# Cleanup and misc junk
> -#
> -#############################################################
> -clean: $(TARGETS_CLEAN)
> -	rm -rf $(STAGING_DIR) $(TARGET_DIR) $(IMAGE) $(BUILD_DIR)/.root $(STAMP_DIR)
> -
> -dirclean: $(TARGETS_DIRCLEAN)
> -	rm -rf $(STAGING_DIR) $(TARGET_DIR) $(IMAGE) $(BUILD_DIR)/.root $(STAMP_DIR)
> -

If "dirclean" is now dead. . .
Shouldn't the form:
make PackageName-dirclean also die?

What is catching my eye is section of the makefile about:
TARGETS_CLEAN:
TARGETS_SOURCE:
TARGETS_DIRCLEAN:
TARGETS_ALL:

Please keep in mind I missed out on the discussion and
also have very limited knowledge of this build system.

Mike
> -distclean:
> -ifeq ($(DL_DIR),$(TOPDIR)/dl)
> -	rm -rf $(DL_DIR)
> -endif
> -	rm -rf $(TOOLCHAIN_DIR) $(BUILD_DIR) $(BINARIES_DIR) \
> -	.config.cmd
> -	$(MAKE) -C $(CONFIG) clean
> -
>  else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
>  
>  all: menuconfig
> @@ -573,20 +554,26 @@ defconfig: $(CONFIG)/conf
>  source-check: allyesconfig
>  	$(MAKE) _source-check
>  
> +endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
> +
>  #############################################################
>  #
>  # Cleanup and misc junk
>  #
>  #############################################################
>  clean:
> -	rm -f .config .config.old .config.cmd .tmpconfig.h .lognr.*
> -	-$(MAKE) -C $(CONFIG) clean
> +	rm -rf $(STAGING_DIR) $(TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) \
> +		$(STAMP_DIR) $(BUILD_DIR) $(TOOLCHAIN_DIR)
>  
>  distclean: clean
> -	rm -rf sources/*
> -
> -
> -endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
> +ifeq ($(DL_DIR),$(TOPDIR)/dl)
> +	rm -rf $(DL_DIR)
> +endif
> +ifeq ($(O),output)
> +	rm -rf $(O)
> +endif
> +	rm -rf .config .config.old .config.cmd .auto.deps
> +	-$(MAKE) -C $(CONFIG) clean
>  
>  flush:
>  	rm -f $(BUILD_DIR)/tgt-config.cache
> @@ -603,7 +590,7 @@ cross: $(BASE_TARGETS)
>  
>  help:
>  	@echo 'Cleaning:'
> -	@echo '  clean                  - delete temporary files created by build'
> +	@echo '  clean                  - delete all files created by build'
>  	@echo '  distclean              - delete all non-source files (including .config)'
>  	@echo
>  	@echo 'Build:'





More information about the buildroot mailing list