[Buildroot] [PATCH 1/1] libaio: convert to the GENTARGETS infrastructure
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Tue Apr 6 19:10:47 UTC 2010
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
package/libaio/libaio-0.3.109-arches.patch | 660 +++++++++++++++++++++++++++
package/libaio/libaio-0.3.109-destdir.patch | 17 +
package/libaio/libaio.mk | 52 +--
3 files changed, 690 insertions(+), 39 deletions(-)
create mode 100644 package/libaio/libaio-0.3.109-arches.patch
create mode 100644 package/libaio/libaio-0.3.109-destdir.patch
diff --git a/package/libaio/libaio-0.3.109-arches.patch b/package/libaio/libaio-0.3.109-arches.patch
new file mode 100644
index 0000000..9003d9c
--- /dev/null
+++ b/package/libaio/libaio-0.3.109-arches.patch
@@ -0,0 +1,660 @@
+---
+ src/libaio.h | 24 +++++
+ src/syscall-m68k.h | 78 +++++++++++++++++
+ src/syscall-mips.h | 223 +++++++++++++++++++++++++++++++++++++++++++++++++++
+ src/syscall-parisc.h | 146 +++++++++++++++++++++++++++++++++
+ src/syscall-sparc.h | 130 +++++++++++++++++++++++++++++
+ src/syscall.h | 8 +
+ 7 files changed, 725 insertions(+)
+
+Index: libaio-0.3.109/src/libaio.h
+===================================================================
+--- libaio-0.3.109.orig/src/libaio.h
++++ libaio-0.3.109/src/libaio.h
+@@ -83,6 +83,30 @@
+ #define PADDEDptr(x, y) x; unsigned y
+ #define PADDEDul(x, y) unsigned long x; unsigned y
+ # endif
++#elif defined(__m68k__) /* big endian, 32 bits */
++#define PADDED(x, y) unsigned y; x
++#define PADDEDptr(x, y) unsigned y; x
++#define PADDEDul(x, y) unsigned y; unsigned long x
++#elif defined(__sparc__) /* big endian, 32 bits */
++#define PADDED(x, y) unsigned y; x
++#define PADDEDptr(x, y) unsigned y; x
++#define PADDEDul(x, y) unsigned y; unsigned long x
++#elif defined(__hppa__) /* big endian, 32 bits */
++#define PADDED(x, y) unsigned y; x
++#define PADDEDptr(x, y) unsigned y; x
++#define PADDEDul(x, y) unsigned y; unsigned long x
++#elif defined(__mips__)
++# if defined (__MIPSEB__) /* big endian, 32 bits */
++#define PADDED(x, y) unsigned y; x
++#define PADDEDptr(x, y) unsigned y; x
++#define PADDEDul(x, y) unsigned y; unsigned long x
++# elif defined(__MIPSEL__) /* little endian, 32 bits */
++#define PADDED(x, y) x; unsigned y
++#define PADDEDptr(x, y) x; unsigned y
++#define PADDEDul(x, y) unsigned long x; unsigned y
++# else
++# error "neither mipseb nor mipsel?"
++# endif
+ #else
+ #error endian?
+ #endif
+Index: libaio-0.3.109/src/syscall-m68k.h
+===================================================================
+--- /dev/null
++++ libaio-0.3.109/src/syscall-m68k.h
+@@ -0,0 +1,78 @@
++#define __NR_io_setup 241
++#define __NR_io_destroy 242
++#define __NR_io_getevents 243
++#define __NR_io_submit 244
++#define __NR_io_cancel 245
++
++#define io_syscall1(type,fname,sname,atype,a) \
++type fname(atype a) \
++{ \
++register long __res __asm__ ("%d0") = __NR_##sname; \
++register long __a __asm__ ("%d1") = (long)(a); \
++__asm__ __volatile__ ("trap #0" \
++ : "+d" (__res) \
++ : "d" (__a) ); \
++return (type) __res; \
++}
++
++#define io_syscall2(type,fname,sname,atype,a,btype,b) \
++type fname(atype a,btype b) \
++{ \
++register long __res __asm__ ("%d0") = __NR_##sname; \
++register long __a __asm__ ("%d1") = (long)(a); \
++register long __b __asm__ ("%d2") = (long)(b); \
++__asm__ __volatile__ ("trap #0" \
++ : "+d" (__res) \
++ : "d" (__a), "d" (__b) \
++ ); \
++return (type) __res; \
++}
++
++#define io_syscall3(type,fname,sname,atype,a,btype,b,ctype,c) \
++type fname(atype a,btype b,ctype c) \
++{ \
++register long __res __asm__ ("%d0") = __NR_##sname; \
++register long __a __asm__ ("%d1") = (long)(a); \
++register long __b __asm__ ("%d2") = (long)(b); \
++register long __c __asm__ ("%d3") = (long)(c); \
++__asm__ __volatile__ ("trap #0" \
++ : "+d" (__res) \
++ : "d" (__a), "d" (__b), \
++ "d" (__c) \
++ ); \
++return (type) __res; \
++}
++
++#define io_syscall4(type,fname,sname,atype,a,btype,b,ctype,c,dtype,d) \
++type fname (atype a, btype b, ctype c, dtype d) \
++{ \
++register long __res __asm__ ("%d0") = __NR_##sname; \
++register long __a __asm__ ("%d1") = (long)(a); \
++register long __b __asm__ ("%d2") = (long)(b); \
++register long __c __asm__ ("%d3") = (long)(c); \
++register long __d __asm__ ("%d4") = (long)(d); \
++__asm__ __volatile__ ("trap #0" \
++ : "+d" (__res) \
++ : "d" (__a), "d" (__b), \
++ "d" (__c), "d" (__d) \
++ ); \
++return (type) __res; \
++}
++
++#define io_syscall5(type,fname,sname,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
++type fname (atype a,btype b,ctype c,dtype d,etype e) \
++{ \
++register long __res __asm__ ("%d0") = __NR_##sname; \
++register long __a __asm__ ("%d1") = (long)(a); \
++register long __b __asm__ ("%d2") = (long)(b); \
++register long __c __asm__ ("%d3") = (long)(c); \
++register long __d __asm__ ("%d4") = (long)(d); \
++register long __e __asm__ ("%d5") = (long)(e); \
++__asm__ __volatile__ ("trap #0" \
++ : "+d" (__res) \
++ : "d" (__a), "d" (__b), \
++ "d" (__c), "d" (__d), "d" (__e) \
++ ); \
++return (type) __res; \
++}
++
+Index: libaio-0.3.109/src/syscall-mips.h
+===================================================================
+--- /dev/null
++++ libaio-0.3.109/src/syscall-mips.h
+@@ -0,0 +1,223 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 1995, 96, 97, 98, 99, 2000 by Ralf Baechle
++ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
++ *
++ * Changed system calls macros _syscall5 - _syscall7 to push args 5 to 7 onto
++ * the stack. Robin Farine for ACN S.A, Copyright (C) 1996 by ACN S.A
++ */
++
++#ifndef _MIPS_SIM_ABI32
++#define _MIPS_SIM_ABI32 1
++#define _MIPS_SIM_NABI32 2
++#define _MIPS_SIM_ABI64 3
++#endif
++
++#if _MIPS_SIM == _MIPS_SIM_ABI32
++
++/*
++ * Linux o32 style syscalls are in the range from 4000 to 4999.
++ */
++#define __NR_Linux 4000
++#define __NR_io_setup (__NR_Linux + 241)
++#define __NR_io_destroy (__NR_Linux + 242)
++#define __NR_io_getevents (__NR_Linux + 243)
++#define __NR_io_submit (__NR_Linux + 244)
++#define __NR_io_cancel (__NR_Linux + 245)
++
++#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
++
++#if _MIPS_SIM == _MIPS_SIM_ABI64
++
++/*
++ * Linux 64-bit syscalls are in the range from 5000 to 5999.
++ */
++#define __NR_Linux 5000
++#define __NR_io_setup (__NR_Linux + 200)
++#define __NR_io_destroy (__NR_Linux + 201)
++#define __NR_io_getevents (__NR_Linux + 202)
++#define __NR_io_submit (__NR_Linux + 203)
++#define __NR_io_cancel (__NR_Linux + 204)
++#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
++
++#if _MIPS_SIM == _MIPS_SIM_NABI32
++
++/*
++ * Linux N32 syscalls are in the range from 6000 to 6999.
++ */
++#define __NR_Linux 6000
++#define __NR_io_setup (__NR_Linux + 200)
++#define __NR_io_destroy (__NR_Linux + 201)
++#define __NR_io_getevents (__NR_Linux + 202)
++#define __NR_io_submit (__NR_Linux + 203)
++#define __NR_io_cancel (__NR_Linux + 204)
++#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
++
++#define io_syscall1(type,fname,sname,atype,a) \
++type fname(atype a) \
++{ \
++ register unsigned long __a0 asm("$4") = (unsigned long) a; \
++ register unsigned long __a3 asm("$7"); \
++ unsigned long __v0; \
++ \
++ __asm__ volatile ( \
++ ".set\tnoreorder\n\t" \
++ "li\t$2, %3\t\t\t# " #fname "\n\t" \
++ "syscall\n\t" \
++ "move\t%0, $2\n\t" \
++ ".set\treorder" \
++ : "=&r" (__v0), "=r" (__a3) \
++ : "r" (__a0), "i" (__NR_##sname) \
++ : "$2", "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
++ "memory"); \
++ \
++ if (__a3 == 0) \
++ return (type) __v0; \
++ return (type) -1; \
++}
++
++#define io_syscall2(type,fname,sname,atype,a,btype,b) \
++type fname(atype a, btype b) \
++{ \
++ register unsigned long __a0 asm("$4") = (unsigned long) a; \
++ register unsigned long __a1 asm("$5") = (unsigned long) b; \
++ register unsigned long __a3 asm("$7"); \
++ unsigned long __v0; \
++ \
++ __asm__ volatile ( \
++ ".set\tnoreorder\n\t" \
++ "li\t$2, %4\t\t\t# " #fname "\n\t" \
++ "syscall\n\t" \
++ "move\t%0, $2\n\t" \
++ ".set\treorder" \
++ : "=&r" (__v0), "=r" (__a3) \
++ : "r" (__a0), "r" (__a1), "i" (__NR_##sname) \
++ : "$2", "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
++ "memory"); \
++ \
++ if (__a3 == 0) \
++ return (type) __v0; \
++ return (type) -1; \
++}
++
++#define io_syscall3(type,fname,sname,atype,a,btype,b,ctype,c) \
++type fname(atype a, btype b, ctype c) \
++{ \
++ register unsigned long __a0 asm("$4") = (unsigned long) a; \
++ register unsigned long __a1 asm("$5") = (unsigned long) b; \
++ register unsigned long __a2 asm("$6") = (unsigned long) c; \
++ register unsigned long __a3 asm("$7"); \
++ unsigned long __v0; \
++ \
++ __asm__ volatile ( \
++ ".set\tnoreorder\n\t" \
++ "li\t$2, %5\t\t\t# " #fname "\n\t" \
++ "syscall\n\t" \
++ "move\t%0, $2\n\t" \
++ ".set\treorder" \
++ : "=&r" (__v0), "=r" (__a3) \
++ : "r" (__a0), "r" (__a1), "r" (__a2), "i" (__NR_##sname) \
++ : "$2", "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
++ "memory"); \
++ \
++ if (__a3 == 0) \
++ return (type) __v0; \
++ return (type) -1; \
++}
++
++#define io_syscall4(type,fname,sname,atype,a,btype,b,ctype,c,dtype,d) \
++type fname(atype a, btype b, ctype c, dtype d) \
++{ \
++ register unsigned long __a0 asm("$4") = (unsigned long) a; \
++ register unsigned long __a1 asm("$5") = (unsigned long) b; \
++ register unsigned long __a2 asm("$6") = (unsigned long) c; \
++ register unsigned long __a3 asm("$7") = (unsigned long) d; \
++ unsigned long __v0; \
++ \
++ __asm__ volatile ( \
++ ".set\tnoreorder\n\t" \
++ "li\t$2, %5\t\t\t# " #fname "\n\t" \
++ "syscall\n\t" \
++ "move\t%0, $2\n\t" \
++ ".set\treorder" \
++ : "=&r" (__v0), "+r" (__a3) \
++ : "r" (__a0), "r" (__a1), "r" (__a2), "i" (__NR_##sname) \
++ : "$2", "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
++ "memory"); \
++ \
++ if (__a3 == 0) \
++ return (type) __v0; \
++ return (type) -1; \
++}
++
++#if (_MIPS_SIM == _MIPS_SIM_ABI32)
++
++/*
++ * Using those means your brain needs more than an oil change ;-)
++ */
++
++#define io_syscall5(type,fname,sname,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
++type fname(atype a, btype b, ctype c, dtype d, etype e) \
++{ \
++ register unsigned long __a0 asm("$4") = (unsigned long) a; \
++ register unsigned long __a1 asm("$5") = (unsigned long) b; \
++ register unsigned long __a2 asm("$6") = (unsigned long) c; \
++ register unsigned long __a3 asm("$7") = (unsigned long) d; \
++ unsigned long __v0; \
++ \
++ __asm__ volatile ( \
++ ".set\tnoreorder\n\t" \
++ "lw\t$2, %6\n\t" \
++ "subu\t$29, 32\n\t" \
++ "sw\t$2, 16($29)\n\t" \
++ "li\t$2, %5\t\t\t# " #fname "\n\t" \
++ "syscall\n\t" \
++ "move\t%0, $2\n\t" \
++ "addiu\t$29, 32\n\t" \
++ ".set\treorder" \
++ : "=&r" (__v0), "+r" (__a3) \
++ : "r" (__a0), "r" (__a1), "r" (__a2), "i" (__NR_##sname), \
++ "m" ((unsigned long)e) \
++ : "$2", "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
++ "memory"); \
++ \
++ if (__a3 == 0) \
++ return (type) __v0; \
++ return (type) -1; \
++}
++
++#endif /* (_MIPS_SIM == _MIPS_SIM_ABI32) */
++
++#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
++
++#define io_syscall5(type,fname,sname,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
++type fname (atype a,btype b,ctype c,dtype d,etype e) \
++{ \
++ register unsigned long __a0 asm("$4") = (unsigned long) a; \
++ register unsigned long __a1 asm("$5") = (unsigned long) b; \
++ register unsigned long __a2 asm("$6") = (unsigned long) c; \
++ register unsigned long __a3 asm("$7") = (unsigned long) d; \
++ register unsigned long __a4 asm("$8") = (unsigned long) e; \
++ unsigned long __v0; \
++ \
++ __asm__ volatile ( \
++ ".set\tnoreorder\n\t" \
++ "li\t$2, %6\t\t\t# " #fname "\n\t" \
++ "syscall\n\t" \
++ "move\t%0, $2\n\t" \
++ ".set\treorder" \
++ : "=&r" (__v0), "+r" (__a3) \
++ : "r" (__a0), "r" (__a1), "r" (__a2), "r" (__a4), "i" (__NR_##sname) \
++ : "$2", "$9", "$10", "$11", "$12", "$13", "$14", "$15", "$24", \
++ "memory"); \
++ \
++ if (__a3 == 0) \
++ return (type) __v0; \
++ return (type) -1; \
++}
++
++#endif /* (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) */
++
+Index: libaio-0.3.109/src/syscall-parisc.h
+===================================================================
+--- /dev/null
++++ libaio-0.3.109/src/syscall-parisc.h
+@@ -0,0 +1,146 @@
++/*
++ * Linux system call numbers.
++ *
++ * Cary Coutant says that we should just use another syscall gateway
++ * page to avoid clashing with the HPUX space, and I think he's right:
++ * it will would keep a branch out of our syscall entry path, at the
++ * very least. If we decide to change it later, we can ``just'' tweak
++ * the LINUX_GATEWAY_ADDR define at the bottom and make __NR_Linux be
++ * 1024 or something. Oh, and recompile libc. =)
++ *
++ * 64-bit HPUX binaries get the syscall gateway address passed in a register
++ * from the kernel at startup, which seems a sane strategy.
++ */
++
++#define __NR_Linux 0
++#define __NR_io_setup (__NR_Linux + 215)
++#define __NR_io_destroy (__NR_Linux + 216)
++#define __NR_io_getevents (__NR_Linux + 217)
++#define __NR_io_submit (__NR_Linux + 218)
++#define __NR_io_cancel (__NR_Linux + 219)
++
++#define SYS_ify(syscall_name) __NR_##syscall_name
++
++/* Assume all syscalls are done from PIC code just to be
++ * safe. The worst case scenario is that you lose a register
++ * and save/restore r19 across the syscall. */
++#define PIC
++
++/* Definition taken from glibc 2.3.3
++ * sysdeps/unix/sysv/linux/hppa/sysdep.h
++ */
++
++#ifdef PIC
++/* WARNING: CANNOT BE USED IN A NOP! */
++# define K_STW_ASM_PIC " copy %%r19, %%r4\n"
++# define K_LDW_ASM_PIC " copy %%r4, %%r19\n"
++# define K_USING_GR4 "%r4",
++#else
++# define K_STW_ASM_PIC " \n"
++# define K_LDW_ASM_PIC " \n"
++# define K_USING_GR4
++#endif
++
++/* GCC has to be warned that a syscall may clobber all the ABI
++ registers listed as "caller-saves", see page 8, Table 2
++ in section 2.2.6 of the PA-RISC RUN-TIME architecture
++ document. However! r28 is the result and will conflict with
++ the clobber list so it is left out. Also the input arguments
++ registers r20 -> r26 will conflict with the list so they
++ are treated specially. Although r19 is clobbered by the syscall
++ we cannot say this because it would violate ABI, thus we say
++ r4 is clobbered and use that register to save/restore r19
++ across the syscall. */
++
++#define K_CALL_CLOB_REGS "%r1", "%r2", K_USING_GR4 \
++ "%r20", "%r29", "%r31"
++
++#undef K_INLINE_SYSCALL
++#define K_INLINE_SYSCALL(name, nr, args...) ({ \
++ long __sys_res; \
++ { \
++ register unsigned long __res __asm__("r28"); \
++ K_LOAD_ARGS_##nr(args) \
++ /* FIXME: HACK stw/ldw r19 around syscall */ \
++ __asm__ volatile( \
++ K_STW_ASM_PIC \
++ " ble 0x100(%%sr2, %%r0)\n" \
++ " ldi %1, %%r20\n" \
++ K_LDW_ASM_PIC \
++ : "=r" (__res) \
++ : "i" (SYS_ify(name)) K_ASM_ARGS_##nr \
++ : "memory", K_CALL_CLOB_REGS K_CLOB_ARGS_##nr \
++ ); \
++ __sys_res = (long)__res; \
++ } \
++ __sys_res; \
++})
++
++#define K_LOAD_ARGS_0()
++#define K_LOAD_ARGS_1(r26) \
++ register unsigned long __r26 __asm__("r26") = (unsigned long)(r26); \
++ K_LOAD_ARGS_0()
++#define K_LOAD_ARGS_2(r26,r25) \
++ register unsigned long __r25 __asm__("r25") = (unsigned long)(r25); \
++ K_LOAD_ARGS_1(r26)
++#define K_LOAD_ARGS_3(r26,r25,r24) \
++ register unsigned long __r24 __asm__("r24") = (unsigned long)(r24); \
++ K_LOAD_ARGS_2(r26,r25)
++#define K_LOAD_ARGS_4(r26,r25,r24,r23) \
++ register unsigned long __r23 __asm__("r23") = (unsigned long)(r23); \
++ K_LOAD_ARGS_3(r26,r25,r24)
++#define K_LOAD_ARGS_5(r26,r25,r24,r23,r22) \
++ register unsigned long __r22 __asm__("r22") = (unsigned long)(r22); \
++ K_LOAD_ARGS_4(r26,r25,r24,r23)
++#define K_LOAD_ARGS_6(r26,r25,r24,r23,r22,r21) \
++ register unsigned long __r21 __asm__("r21") = (unsigned long)(r21); \
++ K_LOAD_ARGS_5(r26,r25,r24,r23,r22)
++
++/* Even with zero args we use r20 for the syscall number */
++#define K_ASM_ARGS_0
++#define K_ASM_ARGS_1 K_ASM_ARGS_0, "r" (__r26)
++#define K_ASM_ARGS_2 K_ASM_ARGS_1, "r" (__r25)
++#define K_ASM_ARGS_3 K_ASM_ARGS_2, "r" (__r24)
++#define K_ASM_ARGS_4 K_ASM_ARGS_3, "r" (__r23)
++#define K_ASM_ARGS_5 K_ASM_ARGS_4, "r" (__r22)
++#define K_ASM_ARGS_6 K_ASM_ARGS_5, "r" (__r21)
++
++/* The registers not listed as inputs but clobbered */
++#define K_CLOB_ARGS_6
++#define K_CLOB_ARGS_5 K_CLOB_ARGS_6, "%r21"
++#define K_CLOB_ARGS_4 K_CLOB_ARGS_5, "%r22"
++#define K_CLOB_ARGS_3 K_CLOB_ARGS_4, "%r23"
++#define K_CLOB_ARGS_2 K_CLOB_ARGS_3, "%r24"
++#define K_CLOB_ARGS_1 K_CLOB_ARGS_2, "%r25"
++#define K_CLOB_ARGS_0 K_CLOB_ARGS_1, "%r26"
++
++#define io_syscall1(type,fname,sname,type1,arg1) \
++type fname(type1 arg1) \
++{ \
++ return K_INLINE_SYSCALL(sname, 1, arg1); \
++}
++
++#define io_syscall2(type,fname,sname,type1,arg1,type2,arg2) \
++type fname(type1 arg1, type2 arg2) \
++{ \
++ return K_INLINE_SYSCALL(sname, 2, arg1, arg2); \
++}
++
++#define io_syscall3(type,fname,sname,type1,arg1,type2,arg2,type3,arg3) \
++type fname(type1 arg1, type2 arg2, type3 arg3) \
++{ \
++ return K_INLINE_SYSCALL(sname, 3, arg1, arg2, arg3); \
++}
++
++#define io_syscall4(type,fname,sname,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
++type fname(type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
++{ \
++ return K_INLINE_SYSCALL(sname, 4, arg1, arg2, arg3, arg4); \
++}
++
++#define io_syscall5(type,fname,sname,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \
++type fname(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) \
++{ \
++ return K_INLINE_SYSCALL(sname, 5, arg1, arg2, arg3, arg4, arg5); \
++}
++
+Index: libaio-0.3.109/src/syscall-sparc.h
+===================================================================
+--- /dev/null
++++ libaio-0.3.109/src/syscall-sparc.h
+@@ -0,0 +1,130 @@
++/* $Id: unistd.h,v 1.74 2002/02/08 03:57:18 davem Exp $ */
++
++/*
++ * System calls under the Sparc.
++ *
++ * Don't be scared by the ugly clobbers, it is the only way I can
++ * think of right now to force the arguments into fixed registers
++ * before the trap into the system call with gcc 'asm' statements.
++ *
++ * Copyright (C) 1995 David S. Miller (davem at caip.rutgers.edu)
++ *
++ * SunOS compatibility based upon preliminary work which is:
++ *
++ * Copyright (C) 1995 Adrian M. Rodriguez (adrian at remus.rutgers.edu)
++ */
++
++
++#define __NR_io_setup 268
++#define __NR_io_destroy 269
++#define __NR_io_submit 270
++#define __NR_io_cancel 271
++#define __NR_io_getevents 272
++
++
++#define io_syscall1(type,fname,sname,type1,arg1) \
++type fname(type1 arg1) \
++{ \
++long __res; \
++register long __g1 __asm__ ("g1") = __NR_##sname; \
++register long __o0 __asm__ ("o0") = (long)(arg1); \
++__asm__ __volatile__ ("t 0x10\n\t" \
++ "bcc 1f\n\t" \
++ "mov %%o0, %0\n\t" \
++ "sub %%g0, %%o0, %0\n\t" \
++ "1:\n\t" \
++ : "=r" (__res), "=&r" (__o0) \
++ : "1" (__o0), "r" (__g1) \
++ : "cc"); \
++if (__res < -255 || __res >= 0) \
++ return (type) __res; \
++return -1; \
++}
++
++#define io_syscall2(type,fname,sname,type1,arg1,type2,arg2) \
++type fname(type1 arg1,type2 arg2) \
++{ \
++long __res; \
++register long __g1 __asm__ ("g1") = __NR_##sname; \
++register long __o0 __asm__ ("o0") = (long)(arg1); \
++register long __o1 __asm__ ("o1") = (long)(arg2); \
++__asm__ __volatile__ ("t 0x10\n\t" \
++ "bcc 1f\n\t" \
++ "mov %%o0, %0\n\t" \
++ "sub %%g0, %%o0, %0\n\t" \
++ "1:\n\t" \
++ : "=r" (__res), "=&r" (__o0) \
++ : "1" (__o0), "r" (__o1), "r" (__g1) \
++ : "cc"); \
++if (__res < -255 || __res >= 0) \
++ return (type) __res; \
++return -1; \
++}
++
++#define io_syscall3(type,fname,sname,type1,arg1,type2,arg2,type3,arg3) \
++type fname(type1 arg1,type2 arg2,type3 arg3) \
++{ \
++long __res; \
++register long __g1 __asm__ ("g1") = __NR_##sname; \
++register long __o0 __asm__ ("o0") = (long)(arg1); \
++register long __o1 __asm__ ("o1") = (long)(arg2); \
++register long __o2 __asm__ ("o2") = (long)(arg3); \
++__asm__ __volatile__ ("t 0x10\n\t" \
++ "bcc 1f\n\t" \
++ "mov %%o0, %0\n\t" \
++ "sub %%g0, %%o0, %0\n\t" \
++ "1:\n\t" \
++ : "=r" (__res), "=&r" (__o0) \
++ : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__g1) \
++ : "cc"); \
++if (__res < -255 || __res>=0) \
++ return (type) __res; \
++return -1; \
++}
++
++#define io_syscall4(type,fname,sname,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
++type fname(type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
++{ \
++long __res; \
++register long __g1 __asm__ ("g1") = __NR_##sname; \
++register long __o0 __asm__ ("o0") = (long)(arg1); \
++register long __o1 __asm__ ("o1") = (long)(arg2); \
++register long __o2 __asm__ ("o2") = (long)(arg3); \
++register long __o3 __asm__ ("o3") = (long)(arg4); \
++__asm__ __volatile__ ("t 0x10\n\t" \
++ "bcc 1f\n\t" \
++ "mov %%o0, %0\n\t" \
++ "sub %%g0, %%o0, %0\n\t" \
++ "1:\n\t" \
++ : "=r" (__res), "=&r" (__o0) \
++ : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__g1) \
++ : "cc"); \
++if (__res < -255 || __res>=0) \
++ return (type) __res; \
++return -1; \
++}
++
++#define io_syscall5(type,fname,sname,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
++ type5,arg5) \
++type fname(type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \
++{ \
++long __res; \
++register long __g1 __asm__ ("g1") = __NR_##sname; \
++register long __o0 __asm__ ("o0") = (long)(arg1); \
++register long __o1 __asm__ ("o1") = (long)(arg2); \
++register long __o2 __asm__ ("o2") = (long)(arg3); \
++register long __o3 __asm__ ("o3") = (long)(arg4); \
++register long __o4 __asm__ ("o4") = (long)(arg5); \
++__asm__ __volatile__ ("t 0x10\n\t" \
++ "bcc 1f\n\t" \
++ "mov %%o0, %0\n\t" \
++ "sub %%g0, %%o0, %0\n\t" \
++ "1:\n\t" \
++ : "=r" (__res), "=&r" (__o0) \
++ : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__o4), "r" (__g1) \
++ : "cc"); \
++if (__res < -255 || __res>=0) \
++ return (type) __res; \
++return -1; \
++}
++
+Index: libaio-0.3.109/src/syscall.h
+===================================================================
+--- libaio-0.3.109.orig/src/syscall.h
++++ libaio-0.3.109/src/syscall.h
+@@ -24,6 +24,14 @@
+ #include "syscall-alpha.h"
+ #elif defined(__arm__)
+ #include "syscall-arm.h"
++#elif defined(__m68k__)
++#include "syscall-m68k.h"
++#elif defined(__sparc__)
++#include "syscall-sparc.h"
++#elif defined(__hppa__)
++#include "syscall-parisc.h"
++#elif defined(__mips__)
++#include "syscall-mips.h"
+ #else
+ #error "add syscall-arch.h"
+ #endif
diff --git a/package/libaio/libaio-0.3.109-destdir.patch b/package/libaio/libaio-0.3.109-destdir.patch
new file mode 100644
index 0000000..bfa1938
--- /dev/null
+++ b/package/libaio/libaio-0.3.109-destdir.patch
@@ -0,0 +1,17 @@
+---
+ Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+Index: libaio-0.3.109/Makefile
+===================================================================
+--- libaio-0.3.109.orig/Makefile
++++ libaio-0.3.109/Makefile
+@@ -23,7 +23,7 @@
+ @$(MAKE) -C src
+
+ install:
+- @$(MAKE) -C src install prefix=$(prefix) includedir=$(includedir) libdir=$(libdir)
++ @$(MAKE) -C src install prefix=$(DESTDIR)$(prefix) includedir=$(DESTDIR)$(includedir) libdir=$(DESTDIR)$(libdir)
+
+ check:
+ @$(MAKE) -C harness check
diff --git a/package/libaio/libaio.mk b/package/libaio/libaio.mk
index f1bb603..6124e1a 100644
--- a/package/libaio/libaio.mk
+++ b/package/libaio/libaio.mk
@@ -3,48 +3,22 @@
# libaio
#
#############################################################
-LIBAIO_VERSION=0.3.106-avr32
+LIBAIO_VERSION=0.3.109
LIBAIO_SOURCE=libaio-$(LIBAIO_VERSION).tar.bz2
-LIBAIO_SITE=http://avr32linux.org/twiki/pub/Main/LibAio/
-LIBAIO_DIR=$(BUILD_DIR)/libaio-$(LIBAIO_VERSION)
-LIBAIO_SOVER=1.0.1
+LIBAIO_SITE=$(BR2_KERNEL_MIRROR)/linux/libs/aio/
+LIBAIO_INSTALL_STAGING=YES
-LIBAIO_ARCH:=$(ARCH)
-LIBAIO_MAKEOPTS:= $(TARGET_CONFIGURE_OPTS) CC=$(TARGET_CC) CFLAGS="$(TARGET_CFLAGS) -nostdlib -nostartfiles -I. -fPIC" LDFLAGS="$(TARGET_LDFLAGS)"
+define LIBAIO_BUILD_CMDS
+ $(TARGET_CONFIGURE_OPTS) $(TARGET_MAKE_ENV) $(MAKE) -C $(@D)
+endef
-$(DL_DIR)/$(LIBAIO_SOURCE):
- $(call DOWNLOAD,$(LIBAIO_SITE),$(LIBAIO_SOURCE))
+define LIBAIO_INSTALL_STAGING_CMDS
+ $(TARGET_CONFIGURE_OPTS) $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install
+endef
-$(LIBAIO_DIR)/.unpacked: $(DL_DIR)/$(LIBAIO_SOURCE)
- $(BZCAT) $(DL_DIR)/$(LIBAIO_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- toolchain/patch-kernel.sh $(LIBAIO_DIR) package/libaio libaio\*.patch
- touch $@
+define LIBAIO_INSTALL_TARGET_CMDS
+ $(TARGET_CONFIGURE_OPTS) $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) install
+endef
-$(LIBAIO_DIR)/src/libaio.so.$(LIBAIO_SOVER): $(LIBAIO_DIR)/.unpacked
- $(MAKE) -C $(LIBAIO_DIR) $(LIBAIO_MAKEOPTS)
+$(eval $(call GENTARGETS,package,libaio))
-$(STAGING_DIR)/usr/lib/libaio.so: $(LIBAIO_DIR)/src/libaio.so.$(LIBAIO_SOVER)
- $(MAKE) -C $(LIBAIO_DIR) $(LIBAIO_MAKEOPTS) prefix=$(STAGING_DIR)/usr install
-
-$(TARGET_DIR)/usr/lib/libaio.so: $(STAGING_DIR)/usr/lib/libaio.so
- cp -dpf $(STAGING_DIR)/usr/lib/libaio.so* $(TARGET_DIR)/usr/lib/
- -$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $(TARGET_DIR)/usr/lib/libaio.so
-
-libaio: $(TARGET_DIR)/usr/lib/libaio.so
-
-libaio-source: $(DL_DIR)/$(LIBAIO_SOURCE)
-
-libaio-clean:
- -$(MAKE) -C $(LIBAIO_DIR) $(LIBAIO_MAKEOPTS) clean
-
-libaio-dirclean:
- rm -rf $(LIBAIO_DIR)
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_PACKAGE_LIBAIO),y)
-TARGETS+=libaio
-endif
--
1.6.3.3
More information about the buildroot
mailing list