[Buildroot] Xorg configuration for XGI chip

Sebastian bastisoft at arcor.de
Wed Mar 24 15:55:33 UTC 2010


Hallo,

the video BIOS is not accessible for end-users, but you can try to boot 
the kernel with "vga=ask" and then use "scan". You'll get a list of 
video modes which are offered by your video BIOS.

You need to configure the kernel to implement this feature; else you can 
use any configuration tool (i.e. use a normal linux distribution and 
then "hwinfo --framebuffer") to get the available video modes.

The vesa driver should also output a list.

The hsync and vsync parameters are used to specify the monitor's 
capabilities; if you use a DDC-compatible monitor, you shouldn't need them.

Try without any options, maybe try with reading the webpage of the 
SiS-driver; i personally don't like the driver, but that was the system 
itself which was crap.

You can always use a normal linux distribution on a PC, and configure it 
down to your needs. If it works there, you can check what might be 
different.

The log itself looks as good as I can read it. Sorry if I can't help you 
any more than this...

Best regards,

Sebastian

Damien Borie schrieb:
> 
> Thank for your help.
> I don't know how to access the video BIOS. I can only access Motherboard 
> BIOS and there is nothing into for video parameters.
> 
> I use startx command to launch X server and my xinitrc is the default 
> one which launch twn, xclock and 3 xterm. When I use vesa, I can see 
> them. But, as I don't get any error, maybe the server is really running 
> and there is only a bad parameter or something like that.
> My log file is a bit log, but here we go. The only thing strange is an 
> memory error when I interrupt (at the end). I don't know the cause, but 
> we think maybe we must set  memory value for video somewhere.
> Another theory : the hsync range and vrefresh range are default, and I 
> don't know how to find the good values.
> 
> X.Org X Server 1.7.1
> Release Date: 2009-10-23
> X Protocol Version 11, Revision 0
> Build Operating System: Linux 2.6.25-2-686 i686
> Current Operating System: Linux matrix5 2.6.32 #1 PREEMPT Tue Mar 23 
> 11:15:59 CET 2010 i586
> Kernel command line: root=/dev/hda2 vga=769 BOOT_IMAGE=bzImage
> Build Date: 22 March 2010  05:55:06PM
> 
> Current version of pixman: 0.17.4
>    Before reporting problems, check http://wiki.x.org
>    to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
>    (++) from command line, (!!) notice, (II) informational,
>    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/usr/var/log/Xorg.0.log", Time: Wed Mar 24 23:07:46 2010
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "Simple Layout"
> (**) |-->Screen "Screen0" (0)
> (**) |   |-->Monitor "Monitor XGI"
> (==) No device specified for screen "Screen0".
>    Using the first device section listed.
> (**) |   |-->Device "Volari z9s"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (==) Not automatically adding devices
> (==) Not automatically enabling devices
> (WW) The directory "/usr/lib/X11/fonts/misc/" does not exist.
>    Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/TTF/" does not exist.
>    Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/OTF" does not exist.
>    Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
>    Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
>    Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
>    Entry deleted from font path.
> (**) FontPath set to:
>    /usr/share/fonts/X11/misc/
> (==) ModulePath set to "/usr/lib/xorg/modules"
> (II) Loader magic: 0x8196b60
> (II) Module ABI versions:
>    X.Org ANSI C Emulation: 0.4
>    X.Org Video Driver: 6.0
>    X.Org XInput driver : 7.0
>    X.Org Server Extension : 2.0
> (--) using VT number 3
> 
> (--) PCI:*(0:0:3:0) 18ca:0020:18ca:0020 rev 0, Mem @ 
> 0xf8000000/67108864, 0xfefc0000/262144, I/O @ 0x0000df80/128
> (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
> (II) "extmod" will be loaded. This was enabled by default and also 
> specified in the config file.
> (II) "dbe" will be loaded. This was enabled by default and also 
> specified in the config file.
> (II) "glx" will be loaded by default.
> (II) "dri" will be loaded by default.
> (II) LoadModule: "dbe"
> (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
>    compiled for 1.7.1, module version = 1.0.0
>    Module class: X.Org Server Extension
>    ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "extmod"
> (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
>    compiled for 1.7.1, module version = 1.0.0
>    Module class: X.Org Server Extension
>    ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension DPMS
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "extmod"
> (II) Reloading /usr/lib/xorg/modules/extensions/libextmod.so
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "glx"
> (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
> (II) Module glx: vendor="X.Org Foundation"
>    compiled for 1.7.1, module version = 1.0.0
>    ABI class: X.Org Server Extension, version 2.0
> (==) AIGLX enabled
> (II) Loading extension GLX
> (II) LoadModule: "dri"
> (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
> (II) Module dri: vendor="X.Org Foundation"
>    compiled for 1.7.1, module version = 1.0.0
>    ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "sis"
> (II) Loading /usr/lib/xorg/modules/drivers/sis_drv.so
> (II) Module sis: vendor="X.Org Foundation"
>    compiled for 1.7.1, module version = 0.10.2
>    Module class: X.Org Video Driver
>    ABI class: X.Org Video Driver, version 6.0
> (II) LoadModule: "mouse"
> (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
> (II) Module mouse: vendor="X.Org Foundation"
>    compiled for 1.7.1, module version = 1.5.0
>    Module class: X.Org XInput Driver
>    ABI class: X.Org XInput driver, version 7.0
> (II) LoadModule: "kbd"
> (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
>    compiled for 1.7.1, module version = 1.4.0
>    Module class: X.Org XInput Driver
>    ABI class: X.Org XInput driver, version 7.0
> (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
>    SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
>    SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
>    SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
>    SIS340
> (II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
>    Volari V3XT/V5/V8/Duo (XG40)
> (II) Primary Device is: PCI 00 at 00:03:0
> (WW) Falling back to old probe method for sis
> (--) Chipset Volari Z7 (XG20) found
> (II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.7.1.0)
> (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer 
> <thomas at winischhofer.net> and others
> (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
> (II) SIS(0): *** for documentation and updates.
> (--) SIS(0): sisfb not found
> (--) SIS(0): Relocated I/O registers at 0xDF80
> (WW) System lacks support for changing MTRRs
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Module "ramdac" already built-in
> (**) SIS(0): Depth 8, (--) framebuffer bpp 8
> (==) SIS(0): Default visual is PseudoColor
> (--) SIS(0): Video BIOS version "1.09.05" found (XGI data layout)
> (**) SIS(0): Option "DRI" "off"
> (**) SIS(0): Option "BenchmarkMemcpy" "no"
> (**) SIS(0): Option "UseSSE" "on"
> (==) SIS(0): Using XAA acceleration architecture
> (==) SIS(0): Using HW cursor
> (II) SIS(0): Using VRAM command queue, size 128k
> (==) SIS(0): Hotkey display switching is enabled
> (==) SIS(0): SiSCtrl utility interface is disabled
> (II) SIS(0): For information on SiSCtrl, see
>        http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
> (**) SIS(0): Will not benchmark methods for system RAM to video RAM 
> transfers
> (**) SIS(0): Will eventually use SSE CPU instructions
> (**) SIS(0): DRI disabled
> (--) SIS(0): DRAM type: Single channel DDR2x SDRAM
> (--) SIS(0): Memory clock: 248.178 MHz
> (--) SIS(0): DRAM bus width: 16 bit
> (--) SIS(0): Linear framebuffer at 0xF8000000
> (--) SIS(0): MMIO registers at 0xFEFC0000 (size 64K)
> (--) SIS(0): VideoRAM: 32768 KB
> (II) SIS(0): Using 32608K of framebuffer memory at offset 0K
> (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
> (II) SIS(0): Gamma correction is enabled
> (--) SIS(0): Memory bandwidth at 8 bpp is 496.356 MHz
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Module "ddc" already built-in
> (--) SIS(0): CRT1 DDC probing failed
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Module "ddc" already built-in
> (II) Loading sub module "vbe"
> (II) LoadModule: "vbe"
> (II) Loading /usr/lib/xorg/modules/libvbe.so
> (II) Module vbe: vendor="X.Org Foundation"
>    compiled for 1.7.1, module version = 1.1.0
>    ABI class: X.Org Video Driver, version 6.0
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Loading /usr/lib/xorg/modules/libint10.so
> (II) Module int10: vendor="X.Org Foundation"
>    compiled for 1.7.1, module version = 1.0.0
>    ABI class: X.Org Video Driver, version 6.0
> (II) SIS(0): initializing int10
> (II) SIS(0): Primary V_BIOS segment is: 0xc000
> (II) SIS(0): VESA BIOS detected
> (II) SIS(0): VESA VBE Version 3.0
> (II) SIS(0): VESA VBE Total Mem: 32768 kB
> (II) SIS(0): VESA VBE OEM: XGI
> (II) SIS(0): VESA VBE OEM Software Rev: 1.0
> (II) SIS(0): VESA VBE OEM Vendor: XGI Technology, Inc.
> (II) SIS(0): VESA VBE OEM Product: Volari Z9s
> (II) SIS(0): VESA VBE OEM Product Rev: 1.09.05
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Module "ddc" already built-in
> (II) SIS(0): VESA VBE DDC supported
> (II) SIS(0): VESA VBE DDC Level none
> (II) SIS(0): VESA VBE DDC transfer in appr. 0 sec.
> (II) SIS(0): VESA VBE DDC read failed
> (==) SIS(0): Min pixel clock is 10 MHz
> (--) SIS(0): Max pixel clock is 166 MHz
> (II) SIS(0): Replaced entire mode list with built-in modes
> (II) SIS(0): Using real widescreen modes for CRT1 VGA devices
> (II) SIS(0):     Use option "ForceCRT1VGAAspect" to overrule
> (II) SIS(0): "Unknown reason" in the following list means that the mode
> (II) SIS(0): is not supported on the chipset/bridge/current output device.
> (II) SIS(0): Monitor XGI: Using default hsync range of 31.50-37.90 kHz
> (II) SIS(0): Monitor XGI: Using default vrefresh range of 50.00-70.00 Hz
> (II) SIS(0): Clock range:  10.00 to 166.00 MHz
> (II) SIS(0): Not using default mode "800x600" (hsync out of range)
> (II) SIS(0): Not using default mode "800x600" (hsync out of range)
> (II) SIS(0): Not using default mode "800x600" (hsync out of range)
> (II) SIS(0): Not using default mode "800x600" (hsync out of range)
> (II) SIS(0): Not using default mode "800x600" (hsync out of range)
> (II) SIS(0): Not using default mode "800x600" (hsync out of range)
> (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
> (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
> (II) SIS(0): Not using default mode "640x480" (hsync out of range)
> (II) SIS(0): Not using default mode "640x480" (hsync out of range)
> (II) SIS(0): Not using default mode "640x480" (hsync out of range)
> (II) SIS(0): Not using default mode "640x480" (hsync out of range)
> (II) SIS(0): Not using default mode "640x480" (hsync out of range)
> (II) SIS(0): Not using default mode "640x400" (vrefresh out of range)
> (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
> (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
> (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
> (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
> (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
> (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
> (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
> (II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
> (II) SIS(0): Not using default mode "1600x1200" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "1600x1200" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "1600x1200" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "1600x1200" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "1600x1200" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "1600x1200" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "320x200" (vrefresh out of range)
> (II) SIS(0): Not using default mode "512x384" (hsync out of range)
> (II) SIS(0): Not using default mode "1920x1440" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "1920x1440" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "1920x1440" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "1920x1440" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "1920x1440" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "1920x1440" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "2048x1536" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "2048x1536" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "2048x1536" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "2048x1536" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "2048x1536" (bad mode 
> clock/interlace/doublescan)
> (II) SIS(0): Not using default mode "800x480" (hsync out of range)
> (II) SIS(0): Not using default mode "800x480" (hsync out of range)
> (II) SIS(0): Not using default mode "1024x576" (hsync out of range)
> (II) SIS(0): Not using default mode "1024x576" (hsync out of range)
> (II) SIS(0): Not using default mode "1024x576" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x720" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x720" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x720" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x960" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x960" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x768" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x768" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x768" (hsync out of range)
> (II) SIS(0): Not using default mode "1400x1050" (hsync out of range)
> (II) SIS(0): Not using default mode "1400x1050" (hsync out of range)
> (II) SIS(0): Not using default mode "1152x864" (hsync out of range)
> (II) SIS(0): Not using default mode "1152x864" (hsync out of range)
> (II) SIS(0): Not using default mode "1152x864" (hsync out of range)
> (II) SIS(0): Not using default mode "848x480" (hsync out of range)
> (II) SIS(0): Not using default mode "848x480" (hsync out of range)
> (II) SIS(0): Not using default mode "856x480" (hsync out of range)
> (II) SIS(0): Not using default mode "1360x768" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x800" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x800" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x800" (hsync out of range)
> (II) SIS(0): Not using default mode "1680x1050" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x854" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x854" (hsync out of range)
> (II) SIS(0): Not using default mode "1280x854" (hsync out of range)
> (II) SIS(0): Not using default mode "960x600" (width too large for 
> virtual size)
> (II) SIS(0): Not using default mode "960x540" (width too large for 
> virtual size)
> (II) SIS(0): Not using default mode "856x480" (width too large for 
> virtual size)
> (--) SIS(0): Virtual size is 800x600 (pitch 800)
> (**) SIS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
> (II) SIS(0): Modeline "800x600"x60.3   39.97  800 840 968 1056  600 601 
> 605 628 +hsync +vsync (37.9 kHz)
> (**) SIS(0):  Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz
> (II) SIS(0): Modeline "800x600"x56.3   36.06  800 824 896 1024  600 601 
> 603 625 +hsync +vsync (35.2 kHz)
> (**) SIS(0):  Default mode "768x576": 35.0 MHz, 35.9 kHz, 60.1 Hz
> (II) SIS(0): Modeline "768x576"x60.1   35.00  768 792 872 976  576 578 
> 581 597 +hsync +vsync (35.9 kHz)
> (**) SIS(0):  Default mode "720x576": 32.7 MHz, 35.9 kHz, 60.1 Hz
> (II) SIS(0): Modeline "720x576"x60.1   32.73  720 744 816 912  576 578 
> 581 597 +hsync +vsync (35.9 kHz)
> (**) SIS(0):  Default mode "800x480": 39.8 MHz, 37.7 kHz, 60.0 Hz
> (II) SIS(0): Modeline "800x480"x60.0   39.77  800 840 968 1056  480 552 
> 556 628 +hsync +vsync (37.7 kHz)
> (**) SIS(0):  Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz
> (II) SIS(0): Modeline "720x480"x61.0   28.28  720 728 840 896  480 490 
> 492 517 -hsync -vsync (31.6 kHz)
> (**) SIS(0):  Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz
> (II) SIS(0): Modeline "640x480"x59.7   25.06  640 656 752 800  480 490 
> 492 525 -hsync -vsync (31.3 kHz)
> (**) SIS(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
> (II) SIS(0): Modeline "400x300"x60.3   19.98  400 416 480 528  300 300 
> 302 314 doublescan +hsync +vsync (37.9 kHz)
> (**) SIS(0):  Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D)
> (II) SIS(0): Modeline "320x240"x60.7   12.53  320 328 376 400  240 245 
> 246 258 doublescan -hsync -vsync (31.3 kHz)
> (==) SIS(0): DPI set to (96, 96)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/lib/xorg/modules/libfb.so
> (II) Module fb: vendor="X.Org Foundation"
>    compiled for 1.7.1, module version = 1.0.0
>    ABI class: X.Org ANSI C Emulation, version 0.4
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/lib/xorg/modules/libxaa.so
> (II) Module xaa: vendor="X.Org Foundation"
>    compiled for 1.7.1, module version = 1.2.1
>    ABI class: X.Org Video Driver, version 6.0
> (II) SIS(0): 2D acceleration enabled
> (II) Loading sub module "vbe"
> (II) LoadModule: "vbe"
> (II) Reloading /usr/lib/xorg/modules/libvbe.so
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Reloading /usr/lib/xorg/modules/libint10.so
> (II) SIS(0): initializing int10
> (II) SIS(0): Primary V_BIOS segment is: 0xc000
> (II) SIS(0): VESA BIOS detected
> (II) SIS(0): VESA VBE Version 3.0
> (II) SIS(0): VESA VBE Total Mem: 32768 kB
> (II) SIS(0): VESA VBE OEM: XGI
> (II) SIS(0): VESA VBE OEM Software Rev: 1.0
> (II) SIS(0): VESA VBE OEM Vendor: XGI Technology, Inc.
> (II) SIS(0): VESA VBE OEM Product: Volari Z9s
> (II) SIS(0): VESA VBE OEM Product Rev: 1.09.05
> (II) SIS(0): Setting standard mode 0x30
> (II) SIS(0): Framebuffer from (0,0) to (799,32766)
> (II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
>    Screen to screen bit blits
>    Solid filled rectangles
>    8x8 mono pattern filled rectangles
>    8x8 color pattern filled rectangles
>    Solid Lines
>    Dashed Lines
>    Setting up tile and stipple cache:
>        32 128x128 slots
>        32 256x256 slots
>        16 512x512 slots
>        32 8x8 color pattern slots
> (==) SIS(0): Backing store disabled
> (==) SIS(0): Silken mouse enabled
> (==) SIS(0): DPMS enabled
> (II) SIS(0): Initialized SISCTRL extension version 0.1
> (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
> (==) RandR enabled
> (II) Initializing built-in extension Generic Event Extension
> (II) Initializing built-in extension SHAPE
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension BIG-REQUESTS
> (II) Initializing built-in extension SYNC
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension XC-MISC
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFIXES
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
> (II) Initializing built-in extension DAMAGE
> (EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed 
> (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such 
> file or directory)
> (EE) GLX: could not load software renderer
> (II) GLX: no usable GL providers found for screen 0
> (**) Option "Protocol" "auto"
> (**) Option "Device" "/dev/event2"
> (II) Mouse1: Setting mouse protocol to "PS/2"
> (**) Mouse1: Device: "/dev/event2"
> (**) Mouse1: Protocol: "auto"
> (**) Option "CorePointer"
> (**) Mouse1: always reports core events
> (**) Option "Device" "/dev/event2"
> (**) Option "Emulate3Buttons" "false"
> (**) Option "ZAxisMapping" "4 5 6 7"
> (**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
> (**) Mouse1: Buttons: 11
> (**) Mouse1: Sensitivity: 1
> (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
> (**) Mouse1: (accel) keeping acceleration scheme 1
> (**) Mouse1: (accel) acceleration profile 0
> (II) Mouse1: Setting mouse protocol to "PS/2"
> (**) Option "CoreKeyboard"
> (**) Keyboard1: always reports core events
> (**) Option "Protocol" "standard"
> (**) Keyboard1: Protocol: standard
> (**) Option "XkbRules" "base"
> (**) Keyboard1: XkbRules: "base"
> (**) Option "XkbModel" "pc105"
> (**) Keyboard1: XkbModel: "pc105"
> (**) Option "XkbLayout" "fr"
> (**) Keyboard1: XkbLayout: "fr"
> (**) Option "XkbVariant" "nodeadkeys"
> (**) Keyboard1: XkbVariant: "nodeadkeys"
> (**) Option "CustomKeycodes" "off"
> (**) Keyboard1: CustomKeycodes disabled
> (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
> (II) UnloadModule: "mouse"
> (II) UnloadModule: "kbd"
> (II) SIS(0): Restoring by setting old mode 0x2e
> (WW) SIS(0): xf86UnMapVidMem: cannot find region for [0xb7137000,0x10000]
> (WW) SIS(0): xf86UnMapVidMem: cannot find region for [0xb5137000,0x2000000]
> 
> Thanks,
> Damien.



More information about the buildroot mailing list