[Buildroot] Xorg configuration for XGI chip
Damien Borie
dbe at terawatt.fr
Thu Mar 25 14:21:43 UTC 2010
Hi,
Well thank you for your help. As I thought, the better mode for
framebuffer is 800x600x8. No mode for depth 16. I don't understand why
as the same device with same hardware, but with smaller screen, accept
depth 16.
I am blocked, so I think I'll try in the Xorg mailing list.
Thanks again,
Damien.
Sebastian a écrit :
> Hallo,
>
> the video BIOS is not accessible for end-users, but you can try to
> boot the kernel with "vga=ask" and then use "scan". You'll get a list
> of video modes which are offered by your video BIOS.
>
> You need to configure the kernel to implement this feature; else you
> can use any configuration tool (i.e. use a normal linux distribution
> and then "hwinfo --framebuffer") to get the available video modes.
>
> The vesa driver should also output a list.
>
> The hsync and vsync parameters are used to specify the monitor's
> capabilities; if you use a DDC-compatible monitor, you shouldn't need
> them.
>
> Try without any options, maybe try with reading the webpage of the
> SiS-driver; i personally don't like the driver, but that was the
> system itself which was crap.
>
> You can always use a normal linux distribution on a PC, and configure
> it down to your needs. If it works there, you can check what might be
> different.
>
> The log itself looks as good as I can read it. Sorry if I can't help
> you any more than this...
>
> Best regards,
>
> Sebastian
>
> Damien Borie schrieb:
>>
>> Thank for your help.
>> I don't know how to access the video BIOS. I can only access
>> Motherboard BIOS and there is nothing into for video parameters.
>>
>> I use startx command to launch X server and my xinitrc is the default
>> one which launch twn, xclock and 3 xterm. When I use vesa, I can see
>> them. But, as I don't get any error, maybe the server is really
>> running and there is only a bad parameter or something like that.
>> My log file is a bit log, but here we go. The only thing strange is
>> an memory error when I interrupt (at the end). I don't know the
>> cause, but we think maybe we must set memory value for video somewhere.
>> Another theory : the hsync range and vrefresh range are default, and
>> I don't know how to find the good values.
>>
>> X.Org X Server 1.7.1
>> Release Date: 2009-10-23
>> X Protocol Version 11, Revision 0
>> Build Operating System: Linux 2.6.25-2-686 i686
>> Current Operating System: Linux matrix5 2.6.32 #1 PREEMPT Tue Mar 23
>> 11:15:59 CET 2010 i586
>> Kernel command line: root=/dev/hda2 vga=769 BOOT_IMAGE=bzImage
>> Build Date: 22 March 2010 05:55:06PM
>>
>> Current version of pixman: 0.17.4
>> Before reporting problems, check http://wiki.x.org
>> to make sure that you have the latest version.
>> Markers: (--) probed, (**) from config file, (==) default setting,
>> (++) from command line, (!!) notice, (II) informational,
>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> (==) Log file: "/usr/var/log/Xorg.0.log", Time: Wed Mar 24 23:07:46 2010
>> (==) Using config file: "/etc/X11/xorg.conf"
>> (==) ServerLayout "Simple Layout"
>> (**) |-->Screen "Screen0" (0)
>> (**) | |-->Monitor "Monitor XGI"
>> (==) No device specified for screen "Screen0".
>> Using the first device section listed.
>> (**) | |-->Device "Volari z9s"
>> (**) |-->Input Device "Mouse1"
>> (**) |-->Input Device "Keyboard1"
>> (==) Not automatically adding devices
>> (==) Not automatically enabling devices
>> (WW) The directory "/usr/lib/X11/fonts/misc/" does not exist.
>> Entry deleted from font path.
>> (WW) The directory "/usr/lib/X11/fonts/TTF/" does not exist.
>> Entry deleted from font path.
>> (WW) The directory "/usr/lib/X11/fonts/OTF" does not exist.
>> Entry deleted from font path.
>> (WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
>> Entry deleted from font path.
>> (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
>> Entry deleted from font path.
>> (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
>> Entry deleted from font path.
>> (**) FontPath set to:
>> /usr/share/fonts/X11/misc/
>> (==) ModulePath set to "/usr/lib/xorg/modules"
>> (II) Loader magic: 0x8196b60
>> (II) Module ABI versions:
>> X.Org ANSI C Emulation: 0.4
>> X.Org Video Driver: 6.0
>> X.Org XInput driver : 7.0
>> X.Org Server Extension : 2.0
>> (--) using VT number 3
>>
>> (--) PCI:*(0:0:3:0) 18ca:0020:18ca:0020 rev 0, Mem @
>> 0xf8000000/67108864, 0xfefc0000/262144, I/O @ 0x0000df80/128
>> (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or
>> directory)
>> (II) "extmod" will be loaded. This was enabled by default and also
>> specified in the config file.
>> (II) "dbe" will be loaded. This was enabled by default and also
>> specified in the config file.
>> (II) "glx" will be loaded by default.
>> (II) "dri" will be loaded by default.
>> (II) LoadModule: "dbe"
>> (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
>> (II) Module dbe: vendor="X.Org Foundation"
>> compiled for 1.7.1, module version = 1.0.0
>> Module class: X.Org Server Extension
>> ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension DOUBLE-BUFFER
>> (II) LoadModule: "extmod"
>> (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
>> (II) Module extmod: vendor="X.Org Foundation"
>> compiled for 1.7.1, module version = 1.0.0
>> Module class: X.Org Server Extension
>> ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension MIT-SCREEN-SAVER
>> (II) Loading extension XFree86-VidModeExtension
>> (II) Loading extension DPMS
>> (II) Loading extension XVideo
>> (II) Loading extension XVideo-MotionCompensation
>> (II) Loading extension X-Resource
>> (II) LoadModule: "extmod"
>> (II) Reloading /usr/lib/xorg/modules/extensions/libextmod.so
>> (II) Loading extension MIT-SCREEN-SAVER
>> (II) Loading extension XFree86-VidModeExtension
>> (II) Loading extension XFree86-DGA
>> (II) Loading extension DPMS
>> (II) Loading extension XVideo
>> (II) Loading extension XVideo-MotionCompensation
>> (II) Loading extension X-Resource
>> (II) LoadModule: "glx"
>> (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
>> (II) Module glx: vendor="X.Org Foundation"
>> compiled for 1.7.1, module version = 1.0.0
>> ABI class: X.Org Server Extension, version 2.0
>> (==) AIGLX enabled
>> (II) Loading extension GLX
>> (II) LoadModule: "dri"
>> (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
>> (II) Module dri: vendor="X.Org Foundation"
>> compiled for 1.7.1, module version = 1.0.0
>> ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension XFree86-DRI
>> (II) LoadModule: "sis"
>> (II) Loading /usr/lib/xorg/modules/drivers/sis_drv.so
>> (II) Module sis: vendor="X.Org Foundation"
>> compiled for 1.7.1, module version = 0.10.2
>> Module class: X.Org Video Driver
>> ABI class: X.Org Video Driver, version 6.0
>> (II) LoadModule: "mouse"
>> (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
>> (II) Module mouse: vendor="X.Org Foundation"
>> compiled for 1.7.1, module version = 1.5.0
>> Module class: X.Org XInput Driver
>> ABI class: X.Org XInput driver, version 7.0
>> (II) LoadModule: "kbd"
>> (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
>> (II) Module kbd: vendor="X.Org Foundation"
>> compiled for 1.7.1, module version = 1.4.0
>> Module class: X.Org XInput Driver
>> ABI class: X.Org XInput driver, version 7.0
>> (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
>> SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
>> SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
>>
>> SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
>> SIS340
>> (II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
>> Volari V3XT/V5/V8/Duo (XG40)
>> (II) Primary Device is: PCI 00 at 00:03:0
>> (WW) Falling back to old probe method for sis
>> (--) Chipset Volari Z7 (XG20) found
>> (II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.7.1.0)
>> (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer
>> <thomas at winischhofer.net> and others
>> (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
>> (II) SIS(0): *** for documentation and updates.
>> (--) SIS(0): sisfb not found
>> (--) SIS(0): Relocated I/O registers at 0xDF80
>> (WW) System lacks support for changing MTRRs
>> (II) Loading sub module "ramdac"
>> (II) LoadModule: "ramdac"
>> (II) Module "ramdac" already built-in
>> (**) SIS(0): Depth 8, (--) framebuffer bpp 8
>> (==) SIS(0): Default visual is PseudoColor
>> (--) SIS(0): Video BIOS version "1.09.05" found (XGI data layout)
>> (**) SIS(0): Option "DRI" "off"
>> (**) SIS(0): Option "BenchmarkMemcpy" "no"
>> (**) SIS(0): Option "UseSSE" "on"
>> (==) SIS(0): Using XAA acceleration architecture
>> (==) SIS(0): Using HW cursor
>> (II) SIS(0): Using VRAM command queue, size 128k
>> (==) SIS(0): Hotkey display switching is enabled
>> (==) SIS(0): SiSCtrl utility interface is disabled
>> (II) SIS(0): For information on SiSCtrl, see
>> http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
>> (**) SIS(0): Will not benchmark methods for system RAM to video RAM
>> transfers
>> (**) SIS(0): Will eventually use SSE CPU instructions
>> (**) SIS(0): DRI disabled
>> (--) SIS(0): DRAM type: Single channel DDR2x SDRAM
>> (--) SIS(0): Memory clock: 248.178 MHz
>> (--) SIS(0): DRAM bus width: 16 bit
>> (--) SIS(0): Linear framebuffer at 0xF8000000
>> (--) SIS(0): MMIO registers at 0xFEFC0000 (size 64K)
>> (--) SIS(0): VideoRAM: 32768 KB
>> (II) SIS(0): Using 32608K of framebuffer memory at offset 0K
>> (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
>> (II) SIS(0): Gamma correction is enabled
>> (--) SIS(0): Memory bandwidth at 8 bpp is 496.356 MHz
>> (II) Loading sub module "ddc"
>> (II) LoadModule: "ddc"
>> (II) Module "ddc" already built-in
>> (--) SIS(0): CRT1 DDC probing failed
>> (II) Loading sub module "ddc"
>> (II) LoadModule: "ddc"
>> (II) Module "ddc" already built-in
>> (II) Loading sub module "vbe"
>> (II) LoadModule: "vbe"
>> (II) Loading /usr/lib/xorg/modules/libvbe.so
>> (II) Module vbe: vendor="X.Org Foundation"
>> compiled for 1.7.1, module version = 1.1.0
>> ABI class: X.Org Video Driver, version 6.0
>> (II) Loading sub module "int10"
>> (II) LoadModule: "int10"
>> (II) Loading /usr/lib/xorg/modules/libint10.so
>> (II) Module int10: vendor="X.Org Foundation"
>> compiled for 1.7.1, module version = 1.0.0
>> ABI class: X.Org Video Driver, version 6.0
>> (II) SIS(0): initializing int10
>> (II) SIS(0): Primary V_BIOS segment is: 0xc000
>> (II) SIS(0): VESA BIOS detected
>> (II) SIS(0): VESA VBE Version 3.0
>> (II) SIS(0): VESA VBE Total Mem: 32768 kB
>> (II) SIS(0): VESA VBE OEM: XGI
>> (II) SIS(0): VESA VBE OEM Software Rev: 1.0
>> (II) SIS(0): VESA VBE OEM Vendor: XGI Technology, Inc.
>> (II) SIS(0): VESA VBE OEM Product: Volari Z9s
>> (II) SIS(0): VESA VBE OEM Product Rev: 1.09.05
>> (II) Loading sub module "ddc"
>> (II) LoadModule: "ddc"
>> (II) Module "ddc" already built-in
>> (II) SIS(0): VESA VBE DDC supported
>> (II) SIS(0): VESA VBE DDC Level none
>> (II) SIS(0): VESA VBE DDC transfer in appr. 0 sec.
>> (II) SIS(0): VESA VBE DDC read failed
>> (==) SIS(0): Min pixel clock is 10 MHz
>> (--) SIS(0): Max pixel clock is 166 MHz
>> (II) SIS(0): Replaced entire mode list with built-in modes
>> (II) SIS(0): Using real widescreen modes for CRT1 VGA devices
>> (II) SIS(0): Use option "ForceCRT1VGAAspect" to overrule
>> (II) SIS(0): "Unknown reason" in the following list means that the mode
>> (II) SIS(0): is not supported on the chipset/bridge/current output
>> device.
>> (II) SIS(0): Monitor XGI: Using default hsync range of 31.50-37.90 kHz
>> (II) SIS(0): Monitor XGI: Using default vrefresh range of 50.00-70.00 Hz
>> (II) SIS(0): Clock range: 10.00 to 166.00 MHz
>> (II) SIS(0): Not using default mode "800x600" (hsync out of range)
>> (II) SIS(0): Not using default mode "800x600" (hsync out of range)
>> (II) SIS(0): Not using default mode "800x600" (hsync out of range)
>> (II) SIS(0): Not using default mode "800x600" (hsync out of range)
>> (II) SIS(0): Not using default mode "800x600" (hsync out of range)
>> (II) SIS(0): Not using default mode "800x600" (hsync out of range)
>> (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
>> (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
>> (II) SIS(0): Not using default mode "640x480" (hsync out of range)
>> (II) SIS(0): Not using default mode "640x480" (hsync out of range)
>> (II) SIS(0): Not using default mode "640x480" (hsync out of range)
>> (II) SIS(0): Not using default mode "640x480" (hsync out of range)
>> (II) SIS(0): Not using default mode "640x480" (hsync out of range)
>> (II) SIS(0): Not using default mode "640x400" (vrefresh out of range)
>> (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
>> (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
>> (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
>> (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
>> (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
>> (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
>> (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
>> (II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
>> (II) SIS(0): Not using default mode "1600x1200" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "1600x1200" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "1600x1200" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "1600x1200" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "1600x1200" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "1600x1200" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "320x200" (vrefresh out of range)
>> (II) SIS(0): Not using default mode "512x384" (hsync out of range)
>> (II) SIS(0): Not using default mode "1920x1440" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "1920x1440" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "1920x1440" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "1920x1440" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "1920x1440" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "1920x1440" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "2048x1536" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "2048x1536" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "2048x1536" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "2048x1536" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "2048x1536" (bad mode
>> clock/interlace/doublescan)
>> (II) SIS(0): Not using default mode "800x480" (hsync out of range)
>> (II) SIS(0): Not using default mode "800x480" (hsync out of range)
>> (II) SIS(0): Not using default mode "1024x576" (hsync out of range)
>> (II) SIS(0): Not using default mode "1024x576" (hsync out of range)
>> (II) SIS(0): Not using default mode "1024x576" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x720" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x720" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x720" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x960" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x960" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x768" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x768" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x768" (hsync out of range)
>> (II) SIS(0): Not using default mode "1400x1050" (hsync out of range)
>> (II) SIS(0): Not using default mode "1400x1050" (hsync out of range)
>> (II) SIS(0): Not using default mode "1152x864" (hsync out of range)
>> (II) SIS(0): Not using default mode "1152x864" (hsync out of range)
>> (II) SIS(0): Not using default mode "1152x864" (hsync out of range)
>> (II) SIS(0): Not using default mode "848x480" (hsync out of range)
>> (II) SIS(0): Not using default mode "848x480" (hsync out of range)
>> (II) SIS(0): Not using default mode "856x480" (hsync out of range)
>> (II) SIS(0): Not using default mode "1360x768" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x800" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x800" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x800" (hsync out of range)
>> (II) SIS(0): Not using default mode "1680x1050" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x854" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x854" (hsync out of range)
>> (II) SIS(0): Not using default mode "1280x854" (hsync out of range)
>> (II) SIS(0): Not using default mode "960x600" (width too large for
>> virtual size)
>> (II) SIS(0): Not using default mode "960x540" (width too large for
>> virtual size)
>> (II) SIS(0): Not using default mode "856x480" (width too large for
>> virtual size)
>> (--) SIS(0): Virtual size is 800x600 (pitch 800)
>> (**) SIS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
>> (II) SIS(0): Modeline "800x600"x60.3 39.97 800 840 968 1056 600
>> 601 605 628 +hsync +vsync (37.9 kHz)
>> (**) SIS(0): Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz
>> (II) SIS(0): Modeline "800x600"x56.3 36.06 800 824 896 1024 600
>> 601 603 625 +hsync +vsync (35.2 kHz)
>> (**) SIS(0): Default mode "768x576": 35.0 MHz, 35.9 kHz, 60.1 Hz
>> (II) SIS(0): Modeline "768x576"x60.1 35.00 768 792 872 976 576
>> 578 581 597 +hsync +vsync (35.9 kHz)
>> (**) SIS(0): Default mode "720x576": 32.7 MHz, 35.9 kHz, 60.1 Hz
>> (II) SIS(0): Modeline "720x576"x60.1 32.73 720 744 816 912 576
>> 578 581 597 +hsync +vsync (35.9 kHz)
>> (**) SIS(0): Default mode "800x480": 39.8 MHz, 37.7 kHz, 60.0 Hz
>> (II) SIS(0): Modeline "800x480"x60.0 39.77 800 840 968 1056 480
>> 552 556 628 +hsync +vsync (37.7 kHz)
>> (**) SIS(0): Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz
>> (II) SIS(0): Modeline "720x480"x61.0 28.28 720 728 840 896 480
>> 490 492 517 -hsync -vsync (31.6 kHz)
>> (**) SIS(0): Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz
>> (II) SIS(0): Modeline "640x480"x59.7 25.06 640 656 752 800 480
>> 490 492 525 -hsync -vsync (31.3 kHz)
>> (**) SIS(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
>> (II) SIS(0): Modeline "400x300"x60.3 19.98 400 416 480 528 300
>> 300 302 314 doublescan +hsync +vsync (37.9 kHz)
>> (**) SIS(0): Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D)
>> (II) SIS(0): Modeline "320x240"x60.7 12.53 320 328 376 400 240
>> 245 246 258 doublescan -hsync -vsync (31.3 kHz)
>> (==) SIS(0): DPI set to (96, 96)
>> (II) Loading sub module "fb"
>> (II) LoadModule: "fb"
>> (II) Loading /usr/lib/xorg/modules/libfb.so
>> (II) Module fb: vendor="X.Org Foundation"
>> compiled for 1.7.1, module version = 1.0.0
>> ABI class: X.Org ANSI C Emulation, version 0.4
>> (II) Loading sub module "xaa"
>> (II) LoadModule: "xaa"
>> (II) Loading /usr/lib/xorg/modules/libxaa.so
>> (II) Module xaa: vendor="X.Org Foundation"
>> compiled for 1.7.1, module version = 1.2.1
>> ABI class: X.Org Video Driver, version 6.0
>> (II) SIS(0): 2D acceleration enabled
>> (II) Loading sub module "vbe"
>> (II) LoadModule: "vbe"
>> (II) Reloading /usr/lib/xorg/modules/libvbe.so
>> (II) Loading sub module "int10"
>> (II) LoadModule: "int10"
>> (II) Reloading /usr/lib/xorg/modules/libint10.so
>> (II) SIS(0): initializing int10
>> (II) SIS(0): Primary V_BIOS segment is: 0xc000
>> (II) SIS(0): VESA BIOS detected
>> (II) SIS(0): VESA VBE Version 3.0
>> (II) SIS(0): VESA VBE Total Mem: 32768 kB
>> (II) SIS(0): VESA VBE OEM: XGI
>> (II) SIS(0): VESA VBE OEM Software Rev: 1.0
>> (II) SIS(0): VESA VBE OEM Vendor: XGI Technology, Inc.
>> (II) SIS(0): VESA VBE OEM Product: Volari Z9s
>> (II) SIS(0): VESA VBE OEM Product Rev: 1.09.05
>> (II) SIS(0): Setting standard mode 0x30
>> (II) SIS(0): Framebuffer from (0,0) to (799,32766)
>> (II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
>> Screen to screen bit blits
>> Solid filled rectangles
>> 8x8 mono pattern filled rectangles
>> 8x8 color pattern filled rectangles
>> Solid Lines
>> Dashed Lines
>> Setting up tile and stipple cache:
>> 32 128x128 slots
>> 32 256x256 slots
>> 16 512x512 slots
>> 32 8x8 color pattern slots
>> (==) SIS(0): Backing store disabled
>> (==) SIS(0): Silken mouse enabled
>> (==) SIS(0): DPMS enabled
>> (II) SIS(0): Initialized SISCTRL extension version 0.1
>> (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
>> (==) RandR enabled
>> (II) Initializing built-in extension Generic Event Extension
>> (II) Initializing built-in extension SHAPE
>> (II) Initializing built-in extension MIT-SHM
>> (II) Initializing built-in extension XInputExtension
>> (II) Initializing built-in extension XTEST
>> (II) Initializing built-in extension BIG-REQUESTS
>> (II) Initializing built-in extension SYNC
>> (II) Initializing built-in extension XKEYBOARD
>> (II) Initializing built-in extension XC-MISC
>> (II) Initializing built-in extension XINERAMA
>> (II) Initializing built-in extension XFIXES
>> (II) Initializing built-in extension RENDER
>> (II) Initializing built-in extension RANDR
>> (II) Initializing built-in extension COMPOSITE
>> (II) Initializing built-in extension DAMAGE
>> (EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed
>> (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such
>> file or directory)
>> (EE) GLX: could not load software renderer
>> (II) GLX: no usable GL providers found for screen 0
>> (**) Option "Protocol" "auto"
>> (**) Option "Device" "/dev/event2"
>> (II) Mouse1: Setting mouse protocol to "PS/2"
>> (**) Mouse1: Device: "/dev/event2"
>> (**) Mouse1: Protocol: "auto"
>> (**) Option "CorePointer"
>> (**) Mouse1: always reports core events
>> (**) Option "Device" "/dev/event2"
>> (**) Option "Emulate3Buttons" "false"
>> (**) Option "ZAxisMapping" "4 5 6 7"
>> (**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
>> (**) Mouse1: Buttons: 11
>> (**) Mouse1: Sensitivity: 1
>> (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
>> (**) Mouse1: (accel) keeping acceleration scheme 1
>> (**) Mouse1: (accel) acceleration profile 0
>> (II) Mouse1: Setting mouse protocol to "PS/2"
>> (**) Option "CoreKeyboard"
>> (**) Keyboard1: always reports core events
>> (**) Option "Protocol" "standard"
>> (**) Keyboard1: Protocol: standard
>> (**) Option "XkbRules" "base"
>> (**) Keyboard1: XkbRules: "base"
>> (**) Option "XkbModel" "pc105"
>> (**) Keyboard1: XkbModel: "pc105"
>> (**) Option "XkbLayout" "fr"
>> (**) Keyboard1: XkbLayout: "fr"
>> (**) Option "XkbVariant" "nodeadkeys"
>> (**) Keyboard1: XkbVariant: "nodeadkeys"
>> (**) Option "CustomKeycodes" "off"
>> (**) Keyboard1: CustomKeycodes disabled
>> (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
>> (II) UnloadModule: "mouse"
>> (II) UnloadModule: "kbd"
>> (II) SIS(0): Restoring by setting old mode 0x2e
>> (WW) SIS(0): xf86UnMapVidMem: cannot find region for
>> [0xb7137000,0x10000]
>> (WW) SIS(0): xf86UnMapVidMem: cannot find region for
>> [0xb5137000,0x2000000]
>>
>> Thanks,
>> Damien.
>
>
--
Damien Borie
TERAWATT / AENERGIA S.A.S.
ZA DUBOSCOA
64990 Villefranque
FRANCE
tel : +33 (0)5 59 44 26 08
fax : +33 (0)5 59 31 15 11
More information about the buildroot
mailing list