[Buildroot] JFFS2 Question

[Peter Korsgaard]

>>>>> "Charles" == Charles Krinke <charles.krinke at gmail.com> writes:

Hi,

 Charles> I seem to have gotten myself into a pickle (again) now that I
 Charles> have worked out the details of mounting a buildroot generated
 Charles> rootfs.jffs2.

 Charles> It boots on my MPC8323 target. I can "ls", "cd", "cat". But,
 Charles> .... when it boots, it complains a bit

 Charles> Write of 68 bytes at 0x002fc498 failed. returned -30, retlen 67087004
 Charles> Erase at 0x008a0000 failed immediately: -EROFS. Is the sector locked?

Did you configure jffs2 for the correct flash size? Are your flash
sectors locked (protected?) You can normally check in u-boot.

-- 
Bye, Peter Korsgaard