[Buildroot] support for TI PandaBoard?

[C.A, Subramaniam]

Hi Nico,
I have a similar def config that I have been using for sometime now. I
have been using it for Panda and SDPs as well. I do not have the
u-boot and spl parts though. Are you planning on getting something
working with linaro / goz trees?

On Tue, Nov 22, 2011 at 3:28 PM, Dechesne, Nicolas <n-dechesne at ti.com> wrote:
> hi there,
>
> is there anyone (actively) working on getting Panda support in buildroot?
> Google tells there has been some attempts in the past
> (http://lists.busybox.net/pipermail/buildroot/2011-May/042939.html)...
>
> I am willing to give it a try with a config like this one:
>
> BR2_arm=y
> BR2_cortex_a9=y
> BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
> BR2_TARGET_GENERIC_GETTY_PORT="ttyO2"
> BR2_TARGET_ROOTFS_EXT2=y
> # BR2_TARGET_ROOTFS_TAR is not set
> BR2_TARGET_UBOOT=y
> BR2_TARGET_UBOOT_BOARDNAME="panda"
> BR2_TARGET_XLOADER=y
> BR2_TARGET_XLOADER_BOARDNAME="omap4430panda"
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
>
> But don't want to waste time if someone else is doing it too...
>
> Also, while making this config, I realized that there is no support for
> u-boot&SPL in buildroot, that might be a good thing to add as well in that
> process..
>
> thx
>
> nico
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
>



-- 

Thank you and Regards
Subbu