[Buildroot] [PATCH v3-resend 2/2] new program: usb_modeswitch_data

[Arnout Vandecappelle]

On Sunday 12 February 2012 20:09:53 J.C. Woltz wrote:
> usb_modeswitch_data provides udev rules for usb VID/PID combinations to
> switch usb deices from their default mode into a more useable mode. The
> default mode usually is a cdrom with installation software that is of
> little use in an embedded linux situation
> 
> Signed-off-by: J.C. Woltz <jwoltz at gmail.com>
> 
> Fix usb_modeswitch_data to depend usb_modeswitch
> add $(TARGET_CONFIGURE_OPTS) to be consistent with usb_modeswitch

 Err...  You just changed it into TARGET_CONFIGURE_ENV in usb_modeswitch...

[snip]
> +++ b/package/usb_modeswitch_data/Config.in
> @@ -0,0 +1,8 @@
> +config BR2_PACKAGE_USB_MODESWITCH_DATA
> +	depends on BR2_PACKAGE_USB_MODESWITCH

 Can we have a third opinion on whether this should be depends or select?

 Regards,
 Arnout

-- 
Arnout Vandecappelle                               arnout at mind be
Senior Embedded Software Architect                 +32-16-286540
Essensium/Mind                                     http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium                BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F