[Buildroot] BR 2012.rc1 :: DVI not activated on pandaboard?

Samuel Martin s.martin49 at gmail.com
Thu Mar 8 10:03:40 UTC 2012


Hi Johann, all,

2012/3/8 Thomas Petazzoni <thomas.petazzoni at free-electrons.com>:
> Hello,
>
> Le Wed, 7 Mar 2012 23:16:21 +0000,
> MERCADIER Johann <johann.mercadier at imerir.com> a écrit :
>
>> mmc rescan
>> fatload mmc 0:1 0x80000000 uImage
>> setenv bootargs vram=32M console=ttyO2,115200n8
>> mem=456M at 0x80000000mem=512M at 0xA0000000 omapdss.def_disp=dvi
>> omapfb.mode=dvi:1280x1024MR-24 at 60smsc95xx.macaddr=76:2F:97:85:4F:56
>> root=/dev/nfs rw
>> nfsroot=192.168.1.44:/home/johann/rootfs_TEST,nolock,wsize=1024,rsize=1024
>> ip=192.168.1.235 rootdelay=4 init=/linuxrc
>> bootm 0x80000000
>>
>> when booting I get there, the pandaboard probably still continue the boot
>> process but nothing is displayed on the monitor?...
>> ___[ MINICOM O/P
>> ]________________________________________________________________________________________
>> ...
>>    Verifying Checksum ... OK
>>    Loading Kernel Image ... OK
>> OK
>>
>> Starting kernel ...
>>
>> Uncompressing Linux... done, booting the kernel.
>
Last time, i got this kind of log, i was messing up the console
parameter in kernel args.


Sam



More information about the buildroot mailing list