[Buildroot] [PATCH] Microblaze: added defconfig for Avnet S6LX9 Microboard

Alvaro G. M alvaro.gamez at hazent.com
Sat Mar 17 12:22:59 UTC 2012


From: Stephan Hoffmann <sho at relinux.de>

The Avnet S6LX9 Microboard is a small USB-Stick sized module
containing a Spartan6 FPGA capable of running the Microblaze
softcore processor together with RAM and FLASH memory.

This board support package assumes that the Microblaze Bitfile
available from the Avnet website is programmed into the FPGA.

Signed-off-by: Stephan Hoffmann <sho at relinux.de>
Tested-by: Alvaro G. M <alvaro.gamez at hazent.com>
---
I removed a whitespace in board/avnet/s6lx9_microboard/readme.txt (don't
like them) and changed pachage -> package in the commit message.
Everything else is the same.

 board/avnet/s6lx9_microboard/lx9_mmu.dts       |  247 ++++++++++++++++++++++++
 board/avnet/s6lx9_microboard/lx9_mmu_defconfig |   68 +++++++
 board/avnet/s6lx9_microboard/readme.txt        |   70 +++++++
 configs/s6lx9_microboard_defconfig             |   17 ++
 4 files changed, 402 insertions(+), 0 deletions(-)
 create mode 100644 board/avnet/s6lx9_microboard/lx9_mmu.dts
 create mode 100644 board/avnet/s6lx9_microboard/lx9_mmu_defconfig
 create mode 100644 board/avnet/s6lx9_microboard/readme.txt
 create mode 100644 configs/s6lx9_microboard_defconfig

diff --git a/board/avnet/s6lx9_microboard/lx9_mmu.dts b/board/avnet/s6lx9_microboard/lx9_mmu.dts
new file mode 100644
index 0000000..8ffedd9
--- /dev/null
+++ b/board/avnet/s6lx9_microboard/lx9_mmu.dts
@@ -0,0 +1,247 @@
+/*
+ * Device Tree Generator version: 1.3
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr at monstr.eu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 13.2 EDK_O.61xd
+ *
+ * XPS project directory: device-tree_bsp_230-orig
+ */
+
+/dts-v1/;
+/ {
+    #address-cells = <1>;
+    #size-cells = <1>;
+    compatible = "xlnx,microblaze";
+    model = "testing";
+    MCB3_LPDDR: memory at 80000000 {
+        device_type = "memory";
+        reg = < 0x80000000 0x4000000 >;
+    } ;
+    aliases {
+        ethernet0 = &Ethernet_MAC;
+        serial0 = &USB_Uart;
+    } ;
+    chosen {
+        bootargs = "console=ttyUL0";
+        linux,stdout-path = "/axi at 0/serial at 40600000";
+    } ;
+    cpus {
+        #address-cells = <1>;
+        #cpus = <0x1>;
+        #size-cells = <0>;
+        microblaze_0: cpu at 0 {
+            clock-frequency = <66666667>;
+            compatible = "xlnx,microblaze-8.20.a";
+            d-cache-baseaddr = <0x80000000>;
+            d-cache-highaddr = <0x83ffffff>;
+            d-cache-line-size = <0x10>;
+            d-cache-size = <0x2000>;
+            device_type = "cpu";
+            i-cache-baseaddr = <0x80000000>;
+            i-cache-highaddr = <0x83ffffff>;
+            i-cache-line-size = <0x10>;
+            i-cache-size = <0x2000>;
+            model = "microblaze,8.20.a";
+            reg = <0>;
+            timebase-frequency = <66666667>;
+            xlnx,addr-tag-bits = <0xd>;
+            xlnx,allow-dcache-wr = <0x1>;
+            xlnx,allow-icache-wr = <0x1>;
+            xlnx,area-optimized = <0x0>;
+            xlnx,avoid-primitives = <0x0>;
+            xlnx,branch-target-cache-size = <0x0>;
+            xlnx,cache-byte-size = <0x2000>;
+            xlnx,d-axi = <0x1>;
+            xlnx,d-lmb = <0x1>;
+            xlnx,d-plb = <0x0>;
+            xlnx,data-size = <0x20>;
+            xlnx,dcache-addr-tag = <0xd>;
+            xlnx,dcache-always-used = <0x1>;
+            xlnx,dcache-byte-size = <0x2000>;
+            xlnx,dcache-data-width = <0x0>;
+            xlnx,dcache-force-tag-lutram = <0x0>;
+            xlnx,dcache-interface = <0x0>;
+            xlnx,dcache-line-len = <0x4>;
+            xlnx,dcache-use-fsl = <0x0>;
+            xlnx,dcache-use-writeback = <0x0>;
+            xlnx,dcache-victims = <0x0>;
+            xlnx,debug-enabled = <0x1>;
+            xlnx,div-zero-exception = <0x0>;
+            xlnx,dynamic-bus-sizing = <0x1>;
+            xlnx,ecc-use-ce-exception = <0x0>;
+            xlnx,edge-is-positive = <0x1>;
+            xlnx,endianness = <0x1>;
+            xlnx,family = "spartan6";
+            xlnx,fault-tolerant = <0x0>;
+            xlnx,fpu-exception = <0x0>;
+            xlnx,freq = <0x3f940ab>;
+            xlnx,fsl-data-size = <0x20>;
+            xlnx,fsl-exception = <0x0>;
+            xlnx,fsl-links = <0x0>;
+            xlnx,i-axi = <0x0>;
+            xlnx,i-lmb = <0x1>;
+            xlnx,i-plb = <0x0>;
+            xlnx,icache-always-used = <0x1>;
+            xlnx,icache-data-width = <0x0>;
+            xlnx,icache-force-tag-lutram = <0x0>;
+            xlnx,icache-interface = <0x0>;
+            xlnx,icache-line-len = <0x4>;
+            xlnx,icache-streams = <0x0>;
+            xlnx,icache-use-fsl = <0x0>;
+            xlnx,icache-victims = <0x0>;
+            xlnx,ill-opcode-exception = <0x0>;
+            xlnx,instance = "microblaze_0";
+            xlnx,interconnect = <0x2>;
+            xlnx,interconnect-m-axi-dc-aw-register = <0x0>;
+            xlnx,interconnect-m-axi-dc-read-issuing = <0x2>;
+            xlnx,interconnect-m-axi-dc-w-register = <0x0>;
+            xlnx,interconnect-m-axi-dc-write-issuing = <0x20>;
+            xlnx,interconnect-m-axi-dp-read-issuing = <0x1>;
+            xlnx,interconnect-m-axi-dp-write-issuing = <0x1>;
+            xlnx,interconnect-m-axi-ic-read-issuing = <0x2>;
+            xlnx,interconnect-m-axi-ip-read-issuing = <0x1>;
+            xlnx,interrupt-is-edge = <0x0>;
+            xlnx,lockstep-slave = <0x0>;
+            xlnx,mmu-dtlb-size = <0x1>;
+            xlnx,mmu-itlb-size = <0x1>;
+            xlnx,mmu-privileged-instr = <0x0>;
+            xlnx,mmu-tlb-access = <0x3>;
+            xlnx,mmu-zones = <0x2>;
+            xlnx,number-of-pc-brk = <0x1>;
+            xlnx,number-of-rd-addr-brk = <0x0>;
+            xlnx,number-of-wr-addr-brk = <0x0>;
+            xlnx,opcode-0x0-illegal = <0x0>;
+            xlnx,optimization = <0x0>;
+            xlnx,pvr = <0x0>;
+            xlnx,pvr-user1 = <0x0>;
+            xlnx,pvr-user2 = <0x0>;
+            xlnx,reset-msr = <0x0>;
+            xlnx,sco = <0x0>;
+            xlnx,stream-interconnect = <0x0>;
+            xlnx,unaligned-exceptions = <0x0>;
+            xlnx,use-barrel = <0x1>;
+            xlnx,use-branch-target-cache = <0x0>;
+            xlnx,use-dcache = <0x1>;
+            xlnx,use-div = <0x0>;
+            xlnx,use-ext-brk = <0x1>;
+            xlnx,use-ext-nm-brk = <0x1>;
+            xlnx,use-extended-fsl-instr = <0x0>;
+            xlnx,use-fpu = <0x0>;
+            xlnx,use-hw-mul = <0x1>;
+            xlnx,use-icache = <0x1>;
+            xlnx,use-interrupt = <0x1>;
+            xlnx,use-mmu = <0x3>;
+            xlnx,use-msr-instr = <0x1>;
+            xlnx,use-pcmp-instr = <0x0>;
+            xlnx,use-stack-protection = <0x0>;
+        } ;
+    } ;
+    axi4lite_0: axi at 0 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "xlnx,axi-interconnect-1.03.a", "simple-bus";
+        ranges ;
+        Ethernet_MAC: ethernet at 40e00000 {
+            compatible = "xlnx,axi-ethernetlite-1.00.a", "xlnx,xps-ethernetlite-1.00.a";
+            device_type = "network";
+            interrupt-parent = <&microblaze_0_intc>;
+            interrupts = < 2 0 >;
+            local-mac-address = [ 00 0a 35 aa de 00 ];
+//            phy-handle = <&phy0>;
+            reg = < 0x40e00000 0x10000 >;
+            xlnx,duplex = <0x1>;
+            xlnx,family = "spartan6";
+            xlnx,include-global-buffers = <0x0>;
+            xlnx,include-internal-loopback = <0x0>;
+            xlnx,include-mdio = <0x1>;
+            xlnx,include-phy-constraints = <0x1>;
+            xlnx,interconnect-s-axi-read-acceptance = <0x1>;
+            xlnx,interconnect-s-axi-write-acceptance = <0x1>;
+            xlnx,rx-ping-pong = <0x0>;
+            xlnx,s-axi-aclk-period-ps = <0x3a98>;
+            xlnx,s-axi-id-width = <0x1>;
+            xlnx,s-axi-supports-narrow-burst = <0x0>;
+            xlnx,tx-ping-pong = <0x0>;
+/*
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                phy0: phy at 7 {
+                    compatible = "marvell,88e1111";
+                    device_type = "ethernet-phy";
+                    reg = <7>;
+                } ;
+            } ;
+*/
+        } ;
+        SPI_FLASH: spi at 40a00000 {
+            compatible = "xlnx,axi-spi-1.01.a", "xlnx,xps-spi-2.00.a";
+            interrupt-parent = <&microblaze_0_intc>;
+            interrupts = < 1 2 >;
+            reg = < 0x40a00000 0x10000 >;
+            xlnx,family = "spartan6";
+            xlnx,fifo-exist = <0x1>;
+            xlnx,num-ss-bits = <0x1>;
+            xlnx,num-transfer-bits = <0x8>;
+            xlnx,sck-ratio = <0x4>;
+        } ;
+        USB_Uart: serial at 40600000 {
+            clock-frequency = <66666667>;
+            compatible = "xlnx,axi-uartlite-1.02.a", "xlnx,xps-uartlite-1.00.a";
+            current-speed = <115200>;
+            device_type = "serial";
+            interrupt-parent = <&microblaze_0_intc>;
+            interrupts = < 3 0 >;
+            port-number = <0>;
+            reg = < 0x40600000 0x10000 >;
+            xlnx,baudrate = <0x1c200>;
+            xlnx,data-bits = <0x8>;
+            xlnx,family = "spartan6";
+            xlnx,odd-parity = <0x1>;
+            xlnx,s-axi-aclk-freq-hz = <0x3f940ab>;
+            xlnx,use-parity = <0x0>;
+        } ;
+        microblaze_0_intc: interrupt-controller at 41200000 {
+            #interrupt-cells = <0x2>;
+            compatible = "xlnx,axi-intc-1.01.a", "xlnx,xps-intc-1.00.a";
+            interrupt-controller ;
+            reg = < 0x41200000 0x10000 >;
+            xlnx,kind-of-intr = <0xc>;
+            xlnx,num-intr-inputs = <0x4>;
+        } ;
+        system_timer: timer at 41c00000 {
+            clock-frequency = <66666667>;
+            compatible = "xlnx,axi-timer-1.02.a", "xlnx,xps-timer-1.00.a";
+            interrupt-parent = <&microblaze_0_intc>;
+            interrupts = < 0 2 >;
+            reg = < 0x41c00000 0x10000 >;
+            xlnx,count-width = <0x20>;
+            xlnx,family = "spartan6";
+            xlnx,gen0-assert = <0x1>;
+            xlnx,gen1-assert = <0x1>;
+            xlnx,one-timer-only = <0x0>;
+            xlnx,trig0-assert = <0x1>;
+            xlnx,trig1-assert = <0x1>;
+        } ;
+    } ;
+} ;
diff --git a/board/avnet/s6lx9_microboard/lx9_mmu_defconfig b/board/avnet/s6lx9_microboard/lx9_mmu_defconfig
new file mode 100644
index 0000000..5d01ca0
--- /dev/null
+++ b/board/avnet/s6lx9_microboard/lx9_mmu_defconfig
@@ -0,0 +1,68 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_OPT_LIB_ASM is not set
+CONFIG_KERNEL_BASE_ADDR=0x80000000
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan6"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+# CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR is not set
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_XILINX_MICROBLAZE0_HW_VER="8.20.a"
+CONFIG_HZ_100=y
+CONFIG_MMU=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_XILINX_EMACLITE=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/board/avnet/s6lx9_microboard/readme.txt b/board/avnet/s6lx9_microboard/readme.txt
new file mode 100644
index 0000000..fdf9bf6
--- /dev/null
+++ b/board/avnet/s6lx9_microboard/readme.txt
@@ -0,0 +1,70 @@
+This is the buildroot board support for the Avnet Spartan6 LX9 MicroBoard.
+
+The Avnet S6LX9 Microboard is a small USB-Stick sized module containing
+a Spartan6 FPGA capable of running the Microblaze softcore processor
+together with RAM and FLASH memory.
+
+The board can be bought from Avnet (avnet.com) or from Trenz Electronic
+(www.trenz-electronic.de) for a low prize.
+
+To run the Linux built with buildroot you have to install the FPGA bitfile
+and u-boot as described in the tutorial AvtS6LX9MicroBoard_SW302_PetaLinux
+available on http://www.em.avnet.com/s6microboard
+
+On this site also is a forum containing information on how to build your own
+Microblaze processor for the Microboard.
+
+The image file (default name is simpleImage.lx9_mmu.ub) has to be copied
+to your tftp folder (often /tftpboot/) or can be programmed into the
+board's SPI flash.
+
+Sample session:
+
+$ make s6lx9_microboard_defconfig
+$ make
+$ cp build/linux-<version>/arch/microblaze/boot/simpleImage.lx9_mmu.ub /tftpboot/br12.2a.ub
+$ minicom
+<hit the reset button on the S6LX9 Microboard>
+
+                Icache:ON
+                Dcache:ON
+        U-Boot Start:0x83f00000
+SF: Got idcode 20 ba 18 10 01
+*** Warning - bad CRC, using default environment
+
+Net:   Xilinx_Emaclite
+MAC:   00:0a:35:00:63:37
+U-BOOT for Avnet-LX9-Microboard-AXI-tiny-13.1
+
+BOOTP broadcast 1
+DHCP client bound to address 192.168.11.122
+Hit any key to stop autoboot:  0
+U-Boot-PetaLinux> tftp br12.2a.ub
+Using Xilinx_Emaclite device
+TFTP from server 192.168.11.10; our IP address is 192.168.11.122
+Filename 'br12.2a.ub'.
+Load address: 0x80002000
+Loading: #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         ##############################
+done
+Bytes transferred = 5207724 (4f76ac hex)
+U-Boot-PetaLinux> bootm
+## Booting kernel from Legacy Image at 80002000 ...
+   Image Name:   Linux-3.1.0
+   Image Type:   MicroBlaze Linux Kernel Image (uncompressed)
+   Data Size:    5207660 Bytes =  5 MB
+   Load Address: 80000000
+   Entry Point:  80000000
+   Verifying Checksum ... OK
+   Loading Kernel Image ... OK
+OK
+## Transferring control to Linux (at address 80000000), 0x80000000 ramdisk 0x00000000, FDT 0x00000000...
+Early console on uartlite at 0x40600000
+..... boot log skipped
+
+Welcome to Microblaze Buildroot
+Microblaze login:
diff --git a/configs/s6lx9_microboard_defconfig b/configs/s6lx9_microboard_defconfig
new file mode 100644
index 0000000..5011766
--- /dev/null
+++ b/configs/s6lx9_microboard_defconfig
@@ -0,0 +1,17 @@
+BR2_microblaze=y
+BR2_microblazeel=y
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2=y
+BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="microblazeel-unknown-linux-gnu"
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_ROOTFS_INITRAMFS=y
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/avnet/s6lx9_microboard/lx9_mmu_defconfig"
+BR2_LINUX_KERNEL_DTS_FILE="board/avnet/s6lx9_microboard/lx9_mmu.dts"
+BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="simpleImage.lx9_mmu"
-- 
1.7.9.1




More information about the buildroot mailing list