[Buildroot] [PATCH] package read-edid, corrected patch
Dimitry Golubovsky
golubovsky at gmail.com
Fri May 4 02:14:53 UTC 2012
Hi,
Here is the updated patch per comments by Thomas and Baruch.
Thanks.
Signed-off-by: Dmitry Golubovsky <golubovsky at gmail.com>
---
diff --git a/package/Config.in b/package/Config.in
index caa618b..e39fccf 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -210,6 +210,7 @@ source "package/openocd/Config.in"
source "package/parted/Config.in"
source "package/pciutils/Config.in"
source "package/picocom/Config.in"
+source "package/read-edid/Config.in"
source "package/rng-tools/Config.in"
source "package/sane-backends/Config.in"
source "package/sdparm/Config.in"
diff --git a/package/read-edid/Config.in b/package/read-edid/Config.in
new file mode 100644
index 0000000..c66a5e0
--- /dev/null
+++ b/package/read-edid/Config.in
@@ -0,0 +1,15 @@
+config BR2_PACKAGE_READ_EDID
+ bool "read-edid"
+ help
+ Read-edid is a pair of tools (originally by John Fremlin) for
reading the EDID
+ from a monitor. It should work with most monitors made since 1996
(except for
+ newer ones with 256-byte EDID's - WiP), assuming the video card
supports the
+ standard read commands (most do). Read-edid is a set of two tools
- get-edid,
+ which gets the raw edid information from the monitor, and
parse-edid, which
+ turns the raw binary information into an XF86Config-compatible
monitor section.
+
+ http://polypux.org/projects/read-edid/
+
+depends on (BR2_i386)
+
+
diff --git a/package/read-edid/read-edid.mk b/package/read-edid/read-edid.mk
new file mode 100644
index 0000000..6328def
--- /dev/null
+++ b/package/read-edid/read-edid.mk
@@ -0,0 +1,20 @@
+############################################
+#
+# read-edid
+#
+############################################
+
+READ_EDID_VERSION = 1.4.2
+READ_EDID_SITE = http://www.polypux.org/projects/read-edid/
+
+define READ_EDID_BUILD_CMDS
+ $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D)
+endef
+
+define READ_EDID_INSTALL_TARGET_CMDS
+ $(INSTALL) -D -m 0755 $(@D)/get-edid $(TARGET_DIR)/sbin/get-edid
+ $(INSTALL) -D -m 0755 $(@D)/parse-edid $(TARGET_DIR)/sbin/parse-edid
+endef
+
+$(eval $(call AUTOTARGETS))
+
--
More information about the buildroot
mailing list