[Buildroot] mini2440 MTD partitions uncorrectable error

[Andrei Ehrlich]

Thanks for the note. I boot from NFS, but the NAND device on the Board 
was formatted and configured the U-boot. The solution for my problem was 
disabling CONFIG_FTL option in the kernel config (thanks to Peter K.)

Regards
Andrei

On 05/21/2012 11:33 PM, Arnout Vandecappelle wrote:
> On 05/21/12 22:08, Andrei Ehrlich wrote:
>> Hello,
>>
>> I have the following problem:
>> with buildroot-2011.11 I have generated file system, kernel (3.1.4) 
>> and u-boot. The board starts and everything works
>> fine except for one small flaw that bothers me. When starting the 
>> kernel providesthe following output:
>>
>> ...
>> at24 0-0050: 1024 byte 24c08 EEPROM, writable, 16 bytes/write
>> S3C24XX NAND Driver, (c) 2004 Simtec Electronics
>> s3c24xx-nand s3c2440-nand: Tacls=1, 9ns Twrph0=3 29ns, Twrph1=2 19ns
>> s3c24xx-nand s3c2440-nand: NAND soft ECC
>> NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 
>> 3,3V 8-bit)
>> Creating 4 MTD partitions on "nand":
>> 0x000000000000-0x000000040000 : "u-boot"
>> *uncorrectable error : *
>> 0x000000040000-0x000000060000 : "u-boot-env"
>> *ftl_cs: FTL header not found.*
>> 0x000000060000-0x000000560000 : "kernel"
>> *ftl_cs: FTL header not found.*
>> 0x000000560000-0x000040000000 : "root"
>> *ftl_cs: FTL header not found.*
>> dm9000 Ethernet Driver, V1.31
>> ...
>>
>> Has anyone an idea how I can remove the bold warnings? These warnings 
>> seem to be generated by the file
>> linux-3.1.4/drivers/mtd/ftl.c (line 180).
>> Unfortunately I have no idea how I can fix this problem and hope for 
>> your expert help.
>
>  This question doesn't seem to be related to buildroot, but rather to 
> MTD.
> Try the MTD mailing list at linux-mtd at lists.infradead.org.
>
>  I can hazard a guess though: is it possible that your memory card is not
> formatted (or simply isn't there)?
>
>
>  Regards,
>  Arnout