[Buildroot] arm920t Linux implementation
lionel.jourdren at free.fr
lionel.jourdren at free.fr
Mon Nov 12 10:33:39 UTC 2012
Hi,
In fact I'm totally new for this kind of things, so as you said, I was just asking, at first, to a theoretical confirmation.
Every thing has been generated so I'm ready to test.
I'll keep all Buildroot mailing list follwers informed...
Many thanks for the response,
Best Regards,
Lionel.
PS : not sure I'm responding correctly (regarding email addresses). Please tell me if I've done something wrong.
----- Mail original -----
De: "Thomas Petazzoni" <thomas.petazzoni at free-electrons.com>
À: "lionel jourdren" <lionel.jourdren at free.fr>
Cc: buildroot at busybox.net
Envoyé: Lundi 12 Novembre 2012 11:24:16
Objet: Re: [Buildroot] arm920t Linux implementation
Lionel,
On Mon, 12 Nov 2012 09:01:22 +0100 (CET), lionel.jourdren at free.fr wrote:
> I’m trying to build up a configuration for a card embedding an ARM
> AT91RM9200 processor.
>
> I’d like it to work in little endian mode, and expect to get a zImage
> and initrd file for a linux 2.6.38/uClibC 0.9.31
>
> From what I understood it seems that it’s not necessary to set
> BR2_TARGET_ROOTFS_INITRAMFS (which should embedd initramfs in zImage)
>
> Could someone have a quick look to the configuration below, and see
> if I’ve done something wrong ?
At first sight, nothing looks particularly wrong in your configuration.
But you're not explaining the problem(s) you're facing... so it's hard
to help you. Or are you just seeking a theoretical confirmation that
you configuration looks not too bad?
Best regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
More information about the buildroot
mailing list