[Buildroot] [PATCH 20/23] uclibc: move configuration options into the package
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Sun Jun 30 19:29:10 UTC 2013
In preparation for the introduction of the eglibc library to the
internal toolchain backend, the options that allow to enable/disable C
library features such as largefile, IPv6, RPC and so on now belong to
the uClibc package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
package/uclibc/Config.in | 77 +++++++++++++++++++++++++++++++
toolchain/toolchain-buildroot/Config.in.2 | 77 -------------------------------
2 files changed, 77 insertions(+), 77 deletions(-)
diff --git a/package/uclibc/Config.in b/package/uclibc/Config.in
index 22c70a2..410326b 100644
--- a/package/uclibc/Config.in
+++ b/package/uclibc/Config.in
@@ -49,6 +49,83 @@ config BR2_UCLIBC_CONFIG
See also docs/README in this package.
If unsure, use the default.
+config BR2_TOOLCHAIN_BUILDROOT_LARGEFILE
+ bool "Enable large file (files > 2 GB) support"
+ select BR2_LARGEFILE
+ help
+ Enable this option if you want your toolchain to support
+ files bigger than 2 GB.
+
+config BR2_TOOLCHAIN_BUILDROOT_INET_IPV6
+ bool "Enable IPv6 support"
+ select BR2_INET_IPV6
+ help
+ Enable this option if you want your toolchain to support
+ IPv6.
+
+config BR2_TOOLCHAIN_BUILDROOT_INET_RPC
+ bool "Enable RPC support"
+ select BR2_TOOLCHAIN_HAS_NATIVE_RPC
+ help
+ Enable this option if you want your toolchain to support
+ RPC (needed for NFS, for example).
+
+config BR2_TOOLCHAIN_BUILDROOT_WCHAR
+ bool "Enable WCHAR support"
+ select BR2_USE_WCHAR
+ help
+ Enable this option if you want your toolchain to support
+ wide characters (i.e characters longer than 8 bits, needed
+ for locale support).
+
+config BR2_TOOLCHAIN_BUILDROOT_LOCALE
+ bool "Enable toolchain locale/i18n support"
+ select BR2_TOOLCHAIN_BUILDROOT_WCHAR
+ select BR2_ENABLE_LOCALE
+ help
+ Enable this option if you want your toolchain to support
+ localization and internationalization.
+
+choice
+ prompt "Thread library implementation"
+ default BR2_PTHREADS_NATIVE if !BR2_ARM_OABI && !(BR2_avr32 || BR2_xtensa)
+ default BR2_PTHREADS_OLD
+ help
+ Use this option to select the thread library implementation
+ that should be used in your toolchain. Not all thread
+ variants work with all versions of uClibc, the "linuxthreads
+ (stable/old)" may be a working fallback if you need
+ threading at all.
+
+ config BR2_PTHREADS_NONE
+ bool "none"
+
+ config BR2_PTHREADS
+ bool "linuxthreads"
+ depends on !BR2_xtensa
+ select BR2_TOOLCHAIN_HAS_THREADS
+
+ config BR2_PTHREADS_OLD
+ bool "linuxthreads (stable/old)"
+ select BR2_TOOLCHAIN_HAS_THREADS
+
+ config BR2_PTHREADS_NATIVE
+ bool "Native POSIX Threading (NPTL)"
+ select BR2_TOOLCHAIN_HAS_THREADS
+ depends on !BR2_ARM_OABI
+ depends on !BR2_x86_i386
+ depends on !BR2_avr32
+ depends on !BR2_xtensa
+ depends on !BR2_arc
+endchoice
+
+config BR2_PTHREAD_DEBUG
+ bool "Thread library debugging"
+ depends on BR2_PTHREADS || BR2_PTHREADS_OLD || BR2_PTHREADS_NATIVE
+ select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
+ help
+ Build the thread library with debugging enabled.
+
config BR2_UCLIBC_INSTALL_TEST_SUITE
bool "Compile and install uClibc tests"
select BR2_PACKAGE_MAKE
diff --git a/toolchain/toolchain-buildroot/Config.in.2 b/toolchain/toolchain-buildroot/Config.in.2
index 422602e..9bbf016 100644
--- a/toolchain/toolchain-buildroot/Config.in.2
+++ b/toolchain/toolchain-buildroot/Config.in.2
@@ -4,43 +4,6 @@ if BR2_TOOLCHAIN_BUILDROOT
comment "Toolchain Options"
-config BR2_TOOLCHAIN_BUILDROOT_LARGEFILE
- bool "Enable large file (files > 2 GB) support"
- select BR2_LARGEFILE
- help
- Enable this option if you want your toolchain to support
- files bigger than 2 GB.
-
-config BR2_TOOLCHAIN_BUILDROOT_INET_IPV6
- bool "Enable IPv6 support"
- select BR2_INET_IPV6
- help
- Enable this option if you want your toolchain to support
- IPv6.
-
-config BR2_TOOLCHAIN_BUILDROOT_INET_RPC
- bool "Enable RPC support"
- select BR2_TOOLCHAIN_HAS_NATIVE_RPC
- help
- Enable this option if you want your toolchain to support
- RPC (needed for NFS, for example).
-
-config BR2_TOOLCHAIN_BUILDROOT_WCHAR
- bool "Enable WCHAR support"
- select BR2_USE_WCHAR
- help
- Enable this option if you want your toolchain to support
- wide characters (i.e characters longer than 8 bits, needed
- for locale support).
-
-config BR2_TOOLCHAIN_BUILDROOT_LOCALE
- bool "Enable toolchain locale/i18n support"
- select BR2_TOOLCHAIN_BUILDROOT_WCHAR
- select BR2_ENABLE_LOCALE
- help
- Enable this option if you want your toolchain to support
- localization and internationalization.
-
config BR2_TOOLCHAIN_BUILDROOT_CXX
bool "Enable C++ support"
select BR2_INSTALL_LIBSTDCPP
@@ -58,46 +21,6 @@ config BR2_TOOLCHAIN_BUILDROOT_USE_SSP
See http://www.linuxfromscratch.org/hints/downloads/files/ssp.txt
for details.
-choice
- prompt "Thread library implementation"
- default BR2_PTHREADS_NATIVE if !BR2_ARM_OABI && !(BR2_avr32 || BR2_xtensa)
- default BR2_PTHREADS_OLD
- help
- Use this option to select the thread library implementation
- that should be used in your toolchain. Not all thread
- variants work with all versions of uClibc, the "linuxthreads
- (stable/old)" may be a working fallback if you need
- threading at all.
-
- config BR2_PTHREADS_NONE
- bool "none"
-
- config BR2_PTHREADS
- bool "linuxthreads"
- depends on !BR2_xtensa
- select BR2_TOOLCHAIN_HAS_THREADS
-
- config BR2_PTHREADS_OLD
- bool "linuxthreads (stable/old)"
- select BR2_TOOLCHAIN_HAS_THREADS
-
- config BR2_PTHREADS_NATIVE
- bool "Native POSIX Threading (NPTL)"
- select BR2_TOOLCHAIN_HAS_THREADS
- depends on !BR2_ARM_OABI
- depends on !BR2_x86_i386
- depends on !BR2_avr32
- depends on !BR2_xtensa
- depends on !BR2_arc
-endchoice
-
-config BR2_PTHREAD_DEBUG
- bool "Thread library debugging"
- depends on BR2_PTHREADS || BR2_PTHREADS_OLD || BR2_PTHREADS_NATIVE
- select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
- help
- Build the thread library with debugging enabled.
-
source "package/elf2flt/Config.in.host"
config BR2_VFP_FLOAT
--
1.8.1.2
More information about the buildroot
mailing list