[Buildroot] Qt5 puzzle

[Charles Krinke]

Hmm. You are right, sir. I need to look into that a bit more. I believe I
added a patch to the mkspec to enable neon a while back and maybe that
patch is confusing some of the build logic.

Charles


On Wed, Nov 6, 2013 at 2:06 PM, Thomas Petazzoni <
thomas.petazzoni at free-electrons.com> wrote:

> Dear Charles Krinke,
>
> On Wed, 6 Nov 2013 12:55:05 -0800, Charles Krinke wrote:
>
> > Yes, sir. I am attaching the config so as not to clog up the email too
> much
> > and I appreciate your kind words as usual.
>
> Your configuration has BR2_ARM_EABI=y, so you are *not* using the
> hard-float ABI, and having USE_EABI_HARDFLOAT=0 is expected.
>
> So what you have to understand is why Qt believes it was compiled with
> -mfloat-abi=hard.
>
> Have you changed the toolchain configuration without doing a "make
> clean all" afterwards?
>
> Thomas
> --
> Thomas Petazzoni, CTO, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com
>



-- 
Charles Krinke
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20131106/be8b2b77/attachment-0002.html>