[Buildroot] [PATCH] configs/qemu: bump relevant config versions

Gustavo Zacarias gustavo at zacarias.com.ar
Fri Oct 4 12:49:38 UTC 2013 

arm_nuri needs some DT fixups to switch to the 3.11.x series since it's
now default for that kernel defconfig.

Signed-off-by: Gustavo Zacarias <gustavo at zacarias.com.ar>
---
 board/qemu/arm-nuri/readme.txt                                    | 2 +-
 board/qemu/arm-versatile/{linux-3.10.config => linux-3.11.config} | 0
 board/qemu/arm-versatile/readme.txt                               | 2 +-
 board/qemu/arm-vexpress/readme.txt                                | 2 +-
 .../microblazebe-mmu/{linux-3.10.config => linux-3.11.config}     | 0
 board/qemu/microblazebe-mmu/readme.txt                            | 2 +-
 .../microblazeel-mmu/{linux-3.10.config => linux-3.11.config}     | 0
 board/qemu/microblazeel-mmu/readme.txt                            | 2 +-
 board/qemu/mips-malta/{linux-3.10.config => linux-3.11.config}    | 0
 board/qemu/mips-malta/readme.txt                                  | 2 +-
 board/qemu/mips64-malta/{linux-3.10.config => linux-3.11.config}  | 0
 board/qemu/mips64-malta/readme.txt                                | 2 +-
 board/qemu/mipsel-malta/{linux-3.10.config => linux-3.11.config}  | 0
 board/qemu/mipsel-malta/readme.txt                                | 2 +-
 .../qemu/powerpc-g3beige/{linux-3.10.config => linux-3.11.config} | 0
 board/qemu/powerpc-g3beige/readme.txt                             | 4 ++--
 board/qemu/powerpc-mpc8544ds/readme.txt                           | 2 +-
 board/qemu/powerpc-virtex-ml507/readme.txt                        | 2 +-
 board/qemu/sh4-r2d/readme.txt                                     | 2 +-
 board/qemu/sparc-ss10/readme.txt                                  | 2 +-
 board/qemu/x86/{linux-3.10.config => linux-3.11.config}           | 0
 board/qemu/x86/readme.txt                                         | 2 +-
 board/qemu/x86_64/{linux-3.10.config => linux-3.11.config}        | 0
 board/qemu/x86_64/readme.txt                                      | 2 +-
 configs/qemu_mips64_malta_defconfig                               | 8 ++++----
 configs/qemu_sparc_ss10_defconfig                                 | 4 ++--
 26 files changed, 22 insertions(+), 22 deletions(-)
 rename board/qemu/arm-versatile/{linux-3.10.config => linux-3.11.config} (100%)
 rename board/qemu/microblazebe-mmu/{linux-3.10.config => linux-3.11.config} (100%)
 rename board/qemu/microblazeel-mmu/{linux-3.10.config => linux-3.11.config} (100%)
 rename board/qemu/mips-malta/{linux-3.10.config => linux-3.11.config} (100%)
 rename board/qemu/mips64-malta/{linux-3.10.config => linux-3.11.config} (100%)
 rename board/qemu/mipsel-malta/{linux-3.10.config => linux-3.11.config} (100%)
 rename board/qemu/powerpc-g3beige/{linux-3.10.config => linux-3.11.config} (100%)
 rename board/qemu/x86/{linux-3.10.config => linux-3.11.config} (100%)
 rename board/qemu/x86_64/{linux-3.10.config => linux-3.11.config} (100%)

diff --git a/board/qemu/arm-nuri/readme.txt b/board/qemu/arm-nuri/readme.txt
index 0c64492..0fed2f7 100644
--- a/board/qemu/arm-nuri/readme.txt
+++ b/board/qemu/arm-nuri/readme.txt
@@ -7,4 +7,4 @@ graphical window is the framebuffer.
 
 Startup time is slow because of the SMP CPU emulation so be patient.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/board/qemu/arm-versatile/linux-3.10.config b/board/qemu/arm-versatile/linux-3.11.config
similarity index 100%
rename from board/qemu/arm-versatile/linux-3.10.config
rename to board/qemu/arm-versatile/linux-3.11.config
diff --git a/board/qemu/arm-versatile/readme.txt b/board/qemu/arm-versatile/readme.txt
index e734d56..4902c54 100644
--- a/board/qemu/arm-versatile/readme.txt
+++ b/board/qemu/arm-versatile/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/board/qemu/arm-vexpress/readme.txt b/board/qemu/arm-vexpress/readme.txt
index bde90ef..65d1996 100644
--- a/board/qemu/arm-vexpress/readme.txt
+++ b/board/qemu/arm-vexpress/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/board/qemu/microblazebe-mmu/linux-3.10.config b/board/qemu/microblazebe-mmu/linux-3.11.config
similarity index 100%
rename from board/qemu/microblazebe-mmu/linux-3.10.config
rename to board/qemu/microblazebe-mmu/linux-3.11.config
diff --git a/board/qemu/microblazebe-mmu/readme.txt b/board/qemu/microblazebe-mmu/readme.txt
index 7d172d1..473a934 100644
--- a/board/qemu/microblazebe-mmu/readme.txt
+++ b/board/qemu/microblazebe-mmu/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/board/qemu/microblazeel-mmu/linux-3.10.config b/board/qemu/microblazeel-mmu/linux-3.11.config
similarity index 100%
rename from board/qemu/microblazeel-mmu/linux-3.10.config
rename to board/qemu/microblazeel-mmu/linux-3.11.config
diff --git a/board/qemu/microblazeel-mmu/readme.txt b/board/qemu/microblazeel-mmu/readme.txt
index 9728a45..baddc7a 100644
--- a/board/qemu/microblazeel-mmu/readme.txt
+++ b/board/qemu/microblazeel-mmu/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/board/qemu/mips-malta/linux-3.10.config b/board/qemu/mips-malta/linux-3.11.config
similarity index 100%
rename from board/qemu/mips-malta/linux-3.10.config
rename to board/qemu/mips-malta/linux-3.11.config
diff --git a/board/qemu/mips-malta/readme.txt b/board/qemu/mips-malta/readme.txt
index ccdcc84..33764ea 100644
--- a/board/qemu/mips-malta/readme.txt
+++ b/board/qemu/mips-malta/readme.txt
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/board/qemu/mips64-malta/linux-3.10.config b/board/qemu/mips64-malta/linux-3.11.config
similarity index 100%
rename from board/qemu/mips64-malta/linux-3.10.config
rename to board/qemu/mips64-malta/linux-3.11.config
diff --git a/board/qemu/mips64-malta/readme.txt b/board/qemu/mips64-malta/readme.txt
index 7361722..23b85ab 100644
--- a/board/qemu/mips64-malta/readme.txt
+++ b/board/qemu/mips64-malta/readme.txt
@@ -8,4 +8,4 @@ enabled.
 
 This configuration is known to be flaky.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/board/qemu/mipsel-malta/linux-3.10.config b/board/qemu/mipsel-malta/linux-3.11.config
similarity index 100%
rename from board/qemu/mipsel-malta/linux-3.10.config
rename to board/qemu/mipsel-malta/linux-3.11.config
diff --git a/board/qemu/mipsel-malta/readme.txt b/board/qemu/mipsel-malta/readme.txt
index 52d424d..1e17828 100644
--- a/board/qemu/mipsel-malta/readme.txt
+++ b/board/qemu/mipsel-malta/readme.txt
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/board/qemu/powerpc-g3beige/linux-3.10.config b/board/qemu/powerpc-g3beige/linux-3.11.config
similarity index 100%
rename from board/qemu/powerpc-g3beige/linux-3.10.config
rename to board/qemu/powerpc-g3beige/linux-3.11.config
diff --git a/board/qemu/powerpc-g3beige/readme.txt b/board/qemu/powerpc-g3beige/readme.txt
index b5c73a4..4c0bf8a 100644
--- a/board/qemu/powerpc-g3beige/readme.txt
+++ b/board/qemu/powerpc-g3beige/readme.txt
@@ -1,8 +1,8 @@
 Run the emulation with:
 
-  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -hda output/images/rootfs.ext2 -append "console=ttyS0 root=/dev/hdc" -serial stdio -net nic,model=rtl8139 -net user
+  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -hda output/images/rootfs.ext2 -append "console=ttyS0 root=/dev/hda" -serial stdio -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/board/qemu/powerpc-mpc8544ds/readme.txt b/board/qemu/powerpc-mpc8544ds/readme.txt
index dfe1ac2..8c57ead 100644
--- a/board/qemu/powerpc-mpc8544ds/readme.txt
+++ b/board/qemu/powerpc-mpc8544ds/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/board/qemu/powerpc-virtex-ml507/readme.txt b/board/qemu/powerpc-virtex-ml507/readme.txt
index f4bc5d5..e958d49 100644
--- a/board/qemu/powerpc-virtex-ml507/readme.txt
+++ b/board/qemu/powerpc-virtex-ml507/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/board/qemu/sh4-r2d/readme.txt b/board/qemu/sh4-r2d/readme.txt
index 34f4857..45fca86 100644
--- a/board/qemu/sh4-r2d/readme.txt
+++ b/board/qemu/sh4-r2d/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/board/qemu/sparc-ss10/readme.txt b/board/qemu/sparc-ss10/readme.txt
index 8f4b5be..dab4028 100644
--- a/board/qemu/sparc-ss10/readme.txt
+++ b/board/qemu/sparc-ss10/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/board/qemu/x86/linux-3.10.config b/board/qemu/x86/linux-3.11.config
similarity index 100%
rename from board/qemu/x86/linux-3.10.config
rename to board/qemu/x86/linux-3.11.config
diff --git a/board/qemu/x86/readme.txt b/board/qemu/x86/readme.txt
index 7bc3a1c..5f3af40 100644
--- a/board/qemu/x86/readme.txt
+++ b/board/qemu/x86/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/board/qemu/x86_64/linux-3.10.config b/board/qemu/x86_64/linux-3.11.config
similarity index 100%
rename from board/qemu/x86_64/linux-3.10.config
rename to board/qemu/x86_64/linux-3.11.config
diff --git a/board/qemu/x86_64/readme.txt b/board/qemu/x86_64/readme.txt
index b6f4659..d9eaf56 100644
--- a/board/qemu/x86_64/readme.txt
+++ b/board/qemu/x86_64/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.0
diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig
index 61abdcf..035cfa1 100644
--- a/configs/qemu_mips64_malta_defconfig
+++ b/configs/qemu_mips64_malta_defconfig
@@ -10,16 +10,16 @@ BR2_PREFER_STATIC_LIB=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.10 headers to avoid breaking with newer kernels
+# Lock to 3.11 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.7"
+BR2_DEFAULT_KERNEL_VERSION="3.11.3"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.10.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.11.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config
diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig
index 33f0b21..ca2ed02 100644
--- a/configs/qemu_sparc_ss10_defconfig
+++ b/configs/qemu_sparc_ss10_defconfig
@@ -8,11 +8,11 @@ BR2_TARGET_ROOTFS_EXT2=y
 
 # Lock to 3.7 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.7.10"
+BR2_DEFAULT_KERNEL_VERSION="3.11.3"
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.10"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.3"
 BR2_LINUX_KERNEL_DEFCONFIG="sparc32"
 BR2_LINUX_KERNEL_ZIMAGE=y
-- 
1.8.1.5

More information about the buildroot mailing list