[Buildroot] [PATCH 1/1] aiccu: new package
Arnout Vandecappelle
arnout at mind.be
Wed Sep 4 16:38:26 UTC 2013
On 09/03/13 01:49, Michael Rommel wrote:
> Automatic IPv6 Connectivity Configuration Utility for users of a
> IPv6 tunnel broker, developed by sixxs.net
>
> Signed-off-by: Michael Rommel <rommel at layer-7.net>
> ---
> package/Config.in | 1 +
> package/aiccu/Config.in | 21 ++++
> .../aiccu/aiccu-0001-gnutls-and-uclibc-fixes.patch | 104 ++++++++++++++++++++
> .../aiccu-0002-install-correct-init-script.patch | 17 ++++
> package/aiccu/aiccu.mk | 26 +++++
> 5 files changed, 169 insertions(+)
> create mode 100644 package/aiccu/Config.in
> create mode 100644 package/aiccu/aiccu-0001-gnutls-and-uclibc-fixes.patch
Did you upstream this patch?
> create mode 100644 package/aiccu/aiccu-0002-install-correct-init-script.patch
[snip]
> diff --git a/package/aiccu/aiccu-0002-install-correct-init-script.patch b/package/aiccu/aiccu-0002-install-correct-init-script.patch
> new file mode 100644
> index 0000000..15e9268
> --- /dev/null
> +++ b/package/aiccu/aiccu-0002-install-correct-init-script.patch
> @@ -0,0 +1,17 @@
> +Makefile: remove hardcoded .debian part from install command, debian
> + version does not work under buildroot
> +
> +Signed-off-by: Michael Rommel <rommel at layer-7.net>
> +
> +diff -purN aiccu_20070115.orig/Makefile aiccu_20070115/Makefile
> +--- aiccu_20070115.orig/Makefile 2007-01-11 01:29:33.000000000 +0100
> ++++ aiccu_20070115/Makefile 2013-09-03 00:47:06.153662575 +0200
> +@@ -86,7 +86,7 @@ ifeq ($(shell echo "A${RPM_BUILD_ROOT}")
> + @cp doc/HOWTO ${DESTDIR}${dirdoc}
> + @echo "Installing Debian-style init.d"
> + @mkdir -p ${DESTDIR}${diretc}init.d
> +- @cp doc/${PROJECT}.init.debian ${DESTDIR}${diretc}init.d/${PROJECT}
> ++ @cp doc/${PROJECT}.init ${DESTDIR}${diretc}init.d/${PROJECT}
The init script should be called Sxxaiccu (replace xx by an appropriate
number). And you can do the required chmod here as well. Or better yet,
use 'install -D -m 0755' (which removes the need for mkdir as well).
However, I propose to instead install it manually from the .mk file
(using the _INSTALL_INIT_SYSV variable) and to remove the incorrect init
script in a post-install hook. Maybe there's even a target to install
just the interesting bits and skip the howto and init scripts?
> + else
> + @echo "Installing Redhat-style init.d"
> + @mkdir -p ${DESTDIR}${diretc}init.d
> diff --git a/package/aiccu/aiccu.mk b/package/aiccu/aiccu.mk
> new file mode 100644
> index 0000000..0eb605b
> --- /dev/null
> +++ b/package/aiccu/aiccu.mk
> @@ -0,0 +1,26 @@
> +################################################################################
> +#
> +# aiccu
> +#
> +################################################################################
> +
> +AICCU_VERSION = 20070115
Ouch, that's old...
> +AICCU_SOURCE = aiccu_$(AICCU_VERSION).tar.gz
> +AICCU_SITE = http://www.sixxs.net/archive/sixxs/aiccu/unix/
> +AICCU_LICENSE = SixXS License, concise redistribution license
> +AICCU_LICENSE_FILES = doc/LICENSE
> +AICCU_DEPENDENCIES = gnutls
> +
> +define AICCU_BUILD_CMDS
> + $(MAKE) CC="$(TARGET_CC)" LD="$(TARGET_LD)" -C $(@D) all
> +endef
> +
> +define AICCU_INSTALL_TARGET_CMDS
> + $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) install
> +endef
> +
> +define AICCU_PERMISSIONS
> + /etc/init.d/aiccu f 4755 0 0 - - - - -
Does it really have to be setuid? That is very weird for an init script.
Regards,
Arnout
> +endef
> +
> +$(eval $(generic-package))
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
More information about the buildroot
mailing list