[Buildroot] [PATCH v2 2/2] configs: add Freescale SABRE-SD board support

Gilles Talis gilles.talis at gmail.com
Fri Sep 27 15:44:57 UTC 2013


SABRE Board for Smart Devices (SABRE-SD) is Freescale's evaluation board
based on the i.MX 6Quad ARM Cortex-A9 applications processor.

This defconfig is based off Freescale "official" git repo on git.freescale.com
and SW release 3.0.35_4.1.0.

Signed-off-by: Gilles Talis <gilles.talis at gmail.com>
---
Changes v1 -> v2:
- Removed static device nodes support

 configs/freescale_imx6sabresd_defconfig |   14 ++++++++++++++
 1 file changed, 14 insertions(+)
 create mode 100644 configs/freescale_imx6sabresd_defconfig

diff --git a/configs/freescale_imx6sabresd_defconfig b/configs/freescale_imx6sabresd_defconfig
new file mode 100644
index 0000000..d54ad33
--- /dev/null
+++ b/configs/freescale_imx6sabresd_defconfig
@@ -0,0 +1,14 @@
+BR2_arm=y
+BR2_cortex_a9=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="rel_imx_3.0.35_4.1.0"
+BR2_LINUX_KERNEL_DEFCONFIG="imx6"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx6q_sabresd"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="rel_imx_3.0.35_4.1.0"
-- 
1.7.10.4




More information about the buildroot mailing list