[Buildroot] Adding google-breakpad to buildroot

[Arnout Vandecappelle]

On 23/04/14 18:12, Pascal Hürst wrote:
> On Mit, 2014-04-23 at 17:52 +0200, Samuel Martin wrote:
>> Hi Pascal, Arnout, all,
>>
>> On Wed, Apr 23, 2014 at 5:29 PM, Arnout Vandecappelle <arnout at mind.be> wrote:
>>> On 23/04/14 16:21, Pascal Hürst wrote:
[snip]
>>>  It is easier to add it to the target-finalize target. Then you can be
>>> sure that the ordering is correct (target-finalize already has all the
>>> needed dependencies). You can also easily use conditions there (it's not
>>> inside a define).
>>>
>>>  However, I think it will be more appropriate to implement breakpad as an
>>> additional strip alternative. You probably don't want to combine strip
>>> with breakpad...
>>
>> I think breakpad is more like a pre-strip hook, that one can enable or
>> not. But in the end, the target image will be stripped most of the
>> time (at least, this is the way I would use such a feature).
> 
> I agree, since the extraction of the symbols should always happen, when
> breakpad is used, no mater what strip alternative is selected

 OK, I thought breakpad did stripping already.

 In that case, I think it's best to put it in target-finalize just before
strip.

 Regards,
 Arnout



-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 880 bytes
Desc: OpenPGP digital signature
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20140423/84180dd6/attachment-0002.asc>