[Buildroot] Error building with external toolchain

Danny Gale Daniel.Gale at coloradoengineeringinc.com
Mon Feb 3 19:50:34 UTC 2014


Here's an RPM of the toolchain to run on x86-64 host that will install 
to /opt/start64TC (54 MB download)

http://www.sendspace.com/file/rtvitd

Thanks,
Danny

On 02/03/2014 11:37 AM, Thomas Petazzoni wrote:
> Dear Danny Gale,
>
> On Mon, 03 Feb 2014 10:48:36 -0700, Danny Gale wrote:
>
>>> Aren't you running with "make -j<something>" by any chance?
>> I'm running make with a single thread (-j1) to pinpoint this error.
>>
>> The external toolchain was built on an x86_64 host by Crosstool-NG
>> 1.19.0 for a powerpc64-e6500 target. I've attached the config file for
>> ct-ng.
> Ok. Can you put up online a tarball of this toolchain?
>
> We don't have powerpc64 support in Buildroot, so maybe some minor
> changes in the external toolchain logic are needed.
>
>> I was able to go through the buildroot source and follow it through: the
>> .stamp_staging_installed target calls $($(PKG)_INSTALL_STAGING_CMDS),
>> with PKG=TOOLCHAIN_EXTERNAL. TOOLCHAIN_EXTERNAL_INSTALL_STAGING_COMMANDS
>> in ./toolchain/toolchain-external/toolchain-external.mk calls
>> TOOLCHAIN_EXTERNAL_INSTALL_CORE in that same file. The message "Copying
>> external toolchain libraries to target..." is there, though I don't
>> understand why it fails at that point.
> Correct. All the external toolchain logic is in
> toolchain/toolchain-external/toolchain-external.mk.
>
>> It seems I was mistaken -- the 32-bit version of the toolchain doesn't
>> seem to import either. A different 32-bit toolchain (for the powerpc 440
>> core) does import, however. So there seems to be something wrong with my
>> toolchain configuration. I suspect RPC support to be the culprit.
>>>> What will be required to get buildroot working with the 64-bit toolchain?
>>> When you're talking about 32 bits or 64 bits, are you talking about the
>>> bitness for the host architecture, or the target architecture?
>> The target. The host is an x86_64. The target is a 64-bit powerpc (e6500
>> core)
> Again, if you can sure the toolchain tarball, I could do some testing.
>
> Thanks!
>
> Thomas




More information about the buildroot mailing list