[Buildroot] Antw: Re: Antw: Re: Antw: Re: How to get the kernel to mount a rootfs without an initramfs ??
Arnout Vandecappelle
arnout at mind.be
Wed Feb 12 16:58:49 UTC 2014
On 12/02/14 09:05, Frank Ihle wrote:
>>Actually this sounds like you have no mmc driver in your kernel.
>
> I'm using the defconfig where
>
> in make linux-menuconfig is selected the following:
>
> +Device Drivers
> <*> MMC/SD/SDIO card support
> + + <*> MMC block device driver
> + + <*> MMC host test driver
> + + <*> Atmel SD/MMC Driver (Atmel Multimedia Card Interface support)
> + + [ * ] Atmel MCI DMA support (Exp.)
>
> well but now, that you mention it, it's weired. When I do a bootable
> image with this settings but with initramfs and busybox as init system
> then I should be able to see which devices are detected, right? So If I
> do ls /dev/ mmcblk or sdb isn't even in the list, is that a normal behaviour?
No, it's not.
The platform bindings may be missing in your board file.
Which board are you building for? A standard board or a custom one? In
the latter case, you should check with your kernel developer where to
find the MMC device.
Regards,
Arnout
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
More information about the buildroot
mailing list