[Buildroot] Configuring the gpsd package

Gabi Kelemen Gabi.Kelemen at VERIFONE.com
Thu Jan 2 10:29:53 UTC 2014


Hi Baruch,

Unfortunately I cannot send you my changes because it is not a private file.
I wrote it just like any other source directive.

Regarding the host-scons, I added this package as well so I am able to build the gpsd. (I couldn't build it otherwise).
Again, it is just that I'm unable to make changes to the source gpsd_config.h during build.

Well, I guess I'll have to write a patch for that.......

Gabi

-----Original Message-----
From: Baruch Siach [mailto:baruch at tkos.co.il]
Sent: Thursday, January 02, 2014 12:05 PM
To: Gabi Kelemen
Cc: buildroot at busybox.net
Subject: Re: [Buildroot] Configuring the gpsd package

Hi Gabi,

On Thu, Jan 02, 2014 at 09:40:21AM +0000, Gabi Kelemen wrote:
> Yes, I've added it under menu "Hardware handling".

Can you send your changes as a patch?

> Do I need to rebuild the buildroot for this change to take place?

No. Confing.in changes should take place once you restart 'make menuconfig'.

> I was asking regarding the SCONS because at the top of the
> gpsd_config.h file it says that this file is generated by SCONS.

Of course. host-scons is listed as gpsd dependency, but you don't have host-scons in Buildroot version 2010.11 unfortunately.

baruch

> -----Original Message-----
> From: Baruch Siach [mailto:baruch at tkos.co.il]
> To: Gabi Kelemen
> Cc: buildroot at busybox.net
>
> On Thu, Jan 02, 2014 at 08:21:16AM +0000, Gabi Kelemen wrote:
> > I don't see the gpsd checker box at all.
>
> Then you have a much bigger problem than protocol selection. Have you
> added the needed 'source' directive in package/Config.in?
>
> > I'm using buildroot version 2010.11.
>
> This is quite old. A lot has changes since then. The level of support
> you can expect from Buildroot developers will increase significantly
> if you update to something more recent.
>
> > BTW, does my problem can have anything to do with the SCONS package
> > needed to build the gpsd?
>
> Probably not. But you are likely to encounter a build failure once you
> fix you Config.in problem. Installing scons on your host might be
> enough, though.
>
> baruch

--
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

________________________________
This electronic message, including attachments, is intended only for the use of the individual or company named above or to which it is addressed. The information contained in this message shall be considered confidential and proprietary, and may include confidential work product. If you are not the intended recipient, please be aware that any unauthorized use, dissemination, distribution or copying of this message is strictly prohibited. If you have received this email in error, please notify the sender by replying to this message and deleting this email immediately.




More information about the buildroot mailing list