[Buildroot] [git commit] infra: consistently use double dollar signs inside inner-xxx-targets
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Sat Jun 14 17:09:54 UTC 2014
commit: http://git.buildroot.net/buildroot/commit/?id=54456cc6982598fa45e7c97609e83fabec7c1695
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
The inner-xxx-targets in the buildroot package infrastructures are
evaluated using $(eval) which causes variable references to be a bit
different than in regular make code. As we want most references to be
expanded only at the time of the $(eval) we should not use standard
references $(VAR) but rather use double dollar signs $$(VAR). This includes
function references like $(call), $(subst), etc. The only exception is the
reference to pkgdir/pkgname and numbered variables, which are parameters to
the inner block: $(1), $(2), etc.
This patch introduces consistent usage of double-dollar signs throughout the
different inner-xxx-targets blocks.
In some cases, this would potentially cause circular references, in
particular when the value of HOST_FOO_VAR would be obtained from the
corresponding FOO_VAR if HOST_FOO_VAR is not defined. In these cases, a test
is added to check for a host package (the only case where such constructions
are relevant; these are not circular).
Benefits of these changes are:
- behavior of variables is now again as expected. For example, setting
$(2)_VERSION = virtual in pkg-virtual.mk will effectively work, while
originally it would cause very odd results.
- The output of 'make printvars' is now much more useful. This target shows
the value of all variables, and the expression that led to that value.
However, if the expression was coming from an inner-xxx-targets block, and
was using single dollar signs, it would show in printvars as
VAR = value (value)
while if double dollar signs are used, it would effectively look like
VAR = value (actual expression)
as is intended.
This improvement is for example effective for FOO_DL_VERSION, FOO_RAWNAME,
FOO_SITE_METHOD and FOO_MAKE.
The correctness of this patch has been verified using 'make printvars',
'make manual' and 'make legal-info' before and after applying this patch,
and comparing the output.
Insight-provided-by: Arnout Vandecappelle <arnout at mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire at gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
docs/manual/manual.mk | 21 ++++++-----
fs/common.mk | 18 +++++----
package/pkg-autotools.mk | 30 +++++++++-------
package/pkg-cmake.mk | 34 +++++++++--------
package/pkg-generic.mk | 89 ++++++++++++++++++++++-----------------------
package/pkg-luarocks.mk | 10 +++---
package/pkg-perl.mk | 44 +++++++++++-----------
package/pkg-python.mk | 30 ++++++++-------
package/pkg-virtual.mk | 12 ++++---
9 files changed, 151 insertions(+), 137 deletions(-)
diff --git a/docs/manual/manual.mk b/docs/manual/manual.mk
index 49421df..0d463fd 100644
--- a/docs/manual/manual.mk
+++ b/docs/manual/manual.mk
@@ -33,8 +33,8 @@ manual-check-dependencies-lists:
fi
################################################################################
-# GENDOC -- generates the make targets needed to build a specific type of
-# asciidoc documentation.
+# GENDOC_INNER -- generates the make targets needed to build a specific type of
+# asciidoc documentation.
#
# argument 1 is the name of the document and must be a subdirectory of docs/;
# the top-level asciidoc file must have the same name
@@ -45,6 +45,9 @@ manual-check-dependencies-lists:
# argument 6 (optional) are extra arguments for a2x
#
# The variable <DOCUMENT_NAME>_SOURCES defines the dependencies.
+#
+# Since this function will be called from within an $(eval ...)
+# all variable references except the arguments must be $$-quoted.
################################################################################
define GENDOC_INNER
$(1): $(1)-$(3)
@@ -54,16 +57,16 @@ $(1)-$(3): $$(O)/docs/$(1)/$(1).$(4)
manual-check-dependencies-$(3):
$$(O)/docs/$(1)/$(1).$(4): docs/$(1)/$(1).txt \
- $$($(call UPPERCASE,$(1))_SOURCES) \
+ $$($$(call UPPERCASE,$(1))_SOURCES) \
manual-check-dependencies \
manual-check-dependencies-$(3) \
manual-update-lists
- $(Q)$(call MESSAGE,"Generating $(5) $(1)...")
- $(Q)mkdir -p $$(@D)/.build
- $(Q)rsync -au docs/$(1)/*.txt $$(@D)/.build
- $(Q)a2x $(6) -f $(2) -d book -L -r $(TOPDIR)/docs/images \
+ $$(Q)$$(call MESSAGE,"Generating $(5) $(1)...")
+ $$(Q)mkdir -p $$(@D)/.build
+ $$(Q)rsync -au docs/$(1)/*.txt $$(@D)/.build
+ $$(Q)a2x $(6) -f $(2) -d book -L -r $$(TOPDIR)/docs/images \
-D $$(@D) $$(@D)/.build/$(1).txt
- -$(Q)rm -rf $$(@D)/.build
+ -$$(Q)rm -rf $$(@D)/.build
endef
################################################################################
@@ -82,7 +85,7 @@ $(call GENDOC_INNER,$(1),text,text,text,text)
$(call GENDOC_INNER,$(1),epub,epub,epub,ePUB)
clean: $(1)-clean
$(1)-clean:
- $(Q)$(RM) -rf $(O)/docs/$(1)
+ $$(Q)$$(RM) -rf $$(O)/docs/$(1)
.PHONY: $(1) $(1)-clean manual-update-lists
endef
diff --git a/fs/common.mk b/fs/common.mk
index 45f88b2..70198c0 100644
--- a/fs/common.mk
+++ b/fs/common.mk
@@ -35,11 +35,13 @@ ROOTFS_DEVICE_TABLES = $(call qstrip,$(BR2_ROOTFS_DEVICE_TABLE) \
USERS_TABLE = $(BUILD_DIR)/_users_table.txt
ROOTFS_USERS_TABLES = $(call qstrip,$(BR2_ROOTFS_USERS_TABLES))
+# Since this function will be called from within an $(eval ...)
+# all variable references except the arguments must be $$-quoted.
define ROOTFS_TARGET_INTERNAL
# extra deps
ROOTFS_$(2)_DEPENDENCIES += host-fakeroot host-makedevs \
- $(if $(PACKAGES_USERS),host-mkpasswd)
+ $$(if $$(PACKAGES_USERS),host-mkpasswd)
ifeq ($$(BR2_TARGET_ROOTFS_$(2)_GZIP),y)
ROOTFS_$(2)_COMPRESS_EXT = .gz
@@ -69,7 +71,7 @@ $$(BINARIES_DIR)/rootfs.$(1): target-finalize $$(ROOTFS_$(2)_DEPENDENCIES)
$$(foreach hook,$$(ROOTFS_$(2)_PRE_GEN_HOOKS),$$(call $$(hook))$$(sep))
rm -f $$(FAKEROOT_SCRIPT)
rm -f $$(TARGET_DIR_WARNING_FILE)
- rm -f $(USERS_TABLE)
+ rm -f $$(USERS_TABLE)
echo "chown -h -R 0:0 $$(TARGET_DIR)" >> $$(FAKEROOT_SCRIPT)
ifneq ($$(ROOTFS_DEVICE_TABLES),)
cat $$(ROOTFS_DEVICE_TABLES) > $$(FULL_DEVICE_TABLE)
@@ -80,17 +82,17 @@ endif
echo "$$(HOST_DIR)/usr/bin/makedevs -d $$(FULL_DEVICE_TABLE) $$(TARGET_DIR)" >> $$(FAKEROOT_SCRIPT)
endif
ifneq ($$(ROOTFS_USERS_TABLES),)
- cat $$(ROOTFS_USERS_TABLES) >> $(USERS_TABLE)
+ cat $$(ROOTFS_USERS_TABLES) >> $$(USERS_TABLE)
endif
- printf '$(subst $(sep),\n,$(PACKAGES_USERS))' >> $(USERS_TABLE)
- PATH=$(BR_PATH) $(TOPDIR)/support/scripts/mkusers $(USERS_TABLE) $(TARGET_DIR) >> $(FAKEROOT_SCRIPT)
+ printf '$$(subst $$(sep),\n,$$(PACKAGES_USERS))' >> $$(USERS_TABLE)
+ PATH=$$(BR_PATH) $$(TOPDIR)/support/scripts/mkusers $$(USERS_TABLE) $$(TARGET_DIR) >> $$(FAKEROOT_SCRIPT)
echo "$$(ROOTFS_$(2)_CMD)" >> $$(FAKEROOT_SCRIPT)
chmod a+x $$(FAKEROOT_SCRIPT)
- PATH=$(BR_PATH) $$(HOST_DIR)/usr/bin/fakeroot -- $$(FAKEROOT_SCRIPT)
- $(INSTALL) -m 0644 support/misc/target-dir-warning.txt $$(TARGET_DIR_WARNING_FILE)
+ PATH=$$(BR_PATH) $$(HOST_DIR)/usr/bin/fakeroot -- $$(FAKEROOT_SCRIPT)
+ $$(INSTALL) -m 0644 support/misc/target-dir-warning.txt $$(TARGET_DIR_WARNING_FILE)
- at rm -f $$(FAKEROOT_SCRIPT) $$(FULL_DEVICE_TABLE)
ifneq ($$(ROOTFS_$(2)_COMPRESS_CMD),)
- PATH=$(BR_PATH) $$(ROOTFS_$(2)_COMPRESS_CMD) $$@ > $$@$$(ROOTFS_$(2)_COMPRESS_EXT)
+ PATH=$$(BR_PATH) $$(ROOTFS_$(2)_COMPRESS_CMD) $$@ > $$@$$(ROOTFS_$(2)_COMPRESS_EXT)
endif
rootfs-$(1)-show-depends:
diff --git a/package/pkg-autotools.mk b/package/pkg-autotools.mk
index a646612..e27ec1f 100644
--- a/package/pkg-autotools.mk
+++ b/package/pkg-autotools.mk
@@ -65,7 +65,7 @@ define inner-autotools-package
ifndef $(2)_LIBTOOL_PATCH
ifdef $(3)_LIBTOOL_PATCH
- $(2)_LIBTOOL_PATCH = $($(3)_LIBTOOL_PATCH)
+ $(2)_LIBTOOL_PATCH = $$($(3)_LIBTOOL_PATCH)
else
$(2)_LIBTOOL_PATCH ?= YES
endif
@@ -73,25 +73,28 @@ endif
ifndef $(2)_MAKE
ifdef $(3)_MAKE
- $(2)_MAKE = $($(3)_MAKE)
+ $(2)_MAKE = $$($(3)_MAKE)
else
- $(2)_MAKE ?= $(MAKE)
+ $(2)_MAKE ?= $$(MAKE)
endif
endif
ifndef $(2)_AUTORECONF
ifdef $(3)_AUTORECONF
- $(2)_AUTORECONF = $($(3)_AUTORECONF)
+ $(2)_AUTORECONF = $$($(3)_AUTORECONF)
else
$(2)_AUTORECONF ?= NO
endif
endif
+ifeq ($(4),host)
+ $(2)_AUTORECONF_OPT ?= $$($(3)_AUTORECONF_OPT)
+endif
+
$(2)_CONF_ENV ?=
$(2)_CONF_OPT ?=
$(2)_MAKE_ENV ?=
$(2)_MAKE_OPT ?=
-$(2)_AUTORECONF_OPT ?= $($(3)_AUTORECONF_OPT)
$(2)_INSTALL_OPT ?= install
$(2)_INSTALL_STAGING_OPT ?= DESTDIR=$$(STAGING_DIR) install
$(2)_INSTALL_TARGET_OPT ?= DESTDIR=$$(TARGET_DIR) install
@@ -175,7 +178,7 @@ $(2)_POST_PATCH_HOOKS += UPDATE_CONFIG_HOOK
#
define LIBTOOL_PATCH_HOOK
@$$(call MESSAGE,"Patching libtool")
- $(Q)if test "$$($$(PKG)_LIBTOOL_PATCH)" = "YES" \
+ $$(Q)if test "$$($$(PKG)_LIBTOOL_PATCH)" = "YES" \
-a "$$($$(PKG)_AUTORECONF)" != "YES"; then \
for i in `find $$($$(PKG)_SRCDIR) -name ltmain.sh`; do \
ltmain_version=`sed -n '/^[ ]*VERSION=/{s/^[ ]*VERSION=//;p;q;}' $$$$i | \
@@ -201,8 +204,8 @@ endif
#
define AUTORECONF_HOOK
@$$(call MESSAGE,"Autoreconfiguring")
- $(Q)cd $$($$(PKG)_SRCDIR) && $(AUTORECONF) $$($$(PKG)_AUTORECONF_OPT)
- $(Q)if test "$$($$(PKG)_LIBTOOL_PATCH)" = "YES"; then \
+ $$(Q)cd $$($$(PKG)_SRCDIR) && $$(AUTORECONF) $$($$(PKG)_AUTORECONF_OPT)
+ $$(Q)if test "$$($$(PKG)_LIBTOOL_PATCH)" = "YES"; then \
for i in `find $$($$(PKG)_SRCDIR) -name ltmain.sh`; do \
ltmain_version=`sed -n '/^[ ]*VERSION=/{s/^[ ]*VERSION=//;p;q;}' $$$$i | \
sed -e 's/\([0-9].[0-9]*\).*/\1/' -e 's/\"//'`; \
@@ -220,10 +223,11 @@ endef
# This must be repeated from inner-generic-package, otherwise we get an empty
# _DEPENDENCIES if _AUTORECONF is YES. Also filter the result of _AUTORECONF
# away from the non-host rule
-$(2)_DEPENDENCIES ?= $(filter-out host-automake host-autoconf host-libtool \
+ifeq ($(4),host)
+$(2)_DEPENDENCIES ?= $$(filter-out host-automake host-autoconf host-libtool \
host-toolchain $(1),\
- $(patsubst host-host-%,host-%,$(addprefix host-,$($(3)_DEPENDENCIES))))
-
+ $$(patsubst host-host-%,host-%,$$(addprefix host-,$$($(3)_DEPENDENCIES))))
+endif
ifeq ($$($(2)_AUTORECONF),YES)
$(2)_PRE_CONFIGURE_HOOKS += AUTORECONF_HOOK
@@ -263,9 +267,9 @@ endif
ifndef $(2)_INSTALL_STAGING_CMDS
define $(2)_INSTALL_STAGING_CMDS
$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_INSTALL_STAGING_OPT) -C $$($$(PKG)_SRCDIR)
- for i in $$$$(find $(STAGING_DIR)/usr/lib* -name "*.la"); do \
+ for i in $$$$(find $$(STAGING_DIR)/usr/lib* -name "*.la"); do \
cp -f $$$$i $$$$i~; \
- $$(SED) "s:\(['= ]\)/usr:\\1$(STAGING_DIR)/usr:g" $$$$i; \
+ $$(SED) "s:\(['= ]\)/usr:\\1$$(STAGING_DIR)/usr:g" $$$$i; \
done
endef
endif
diff --git a/package/pkg-cmake.mk b/package/pkg-cmake.mk
index fb8144e..d83ff2d 100644
--- a/package/pkg-cmake.mk
+++ b/package/pkg-cmake.mk
@@ -38,14 +38,14 @@ define inner-cmake-package
$(2)_CONF_ENV ?=
$(2)_CONF_OPT ?=
-$(2)_MAKE ?= $(MAKE)
+$(2)_MAKE ?= $$(MAKE)
$(2)_MAKE_ENV ?=
$(2)_MAKE_OPT ?=
$(2)_INSTALL_HOST_OPT ?= install
$(2)_INSTALL_STAGING_OPT ?= DESTDIR=$$(STAGING_DIR) install
$(2)_INSTALL_TARGET_OPT ?= DESTDIR=$$(TARGET_DIR) install
-$(2)_SRCDIR = $$($(2)_DIR)/$($(2)_SUBDIR)
+$(2)_SRCDIR = $$($(2)_DIR)/$$($(2)_SUBDIR)
$(2)_BUILDDIR = $$($(2)_SRCDIR)
#
@@ -60,15 +60,15 @@ ifeq ($(4),target)
define $(2)_CONFIGURE_CMDS
(cd $$($$(PKG)_BUILDDIR) && \
rm -f CMakeCache.txt && \
- PATH=$(BR_PATH) \
- $$($$(PKG)_CONF_ENV) $(HOST_DIR)/usr/bin/cmake $$($$(PKG)_SRCDIR) \
+ PATH=$$(BR_PATH) \
+ $$($$(PKG)_CONF_ENV) $$(HOST_DIR)/usr/bin/cmake $$($$(PKG)_SRCDIR) \
-DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/usr/share/buildroot/toolchainfile.cmake" \
- -DCMAKE_BUILD_TYPE=$(if $(BR2_ENABLE_DEBUG),Debug,Release) \
+ -DCMAKE_BUILD_TYPE=$$(if $$(BR2_ENABLE_DEBUG),Debug,Release) \
-DCMAKE_INSTALL_PREFIX="/usr" \
-DCMAKE_COLOR_MAKEFILE=OFF \
-DBUILD_TESTING=OFF \
- -DBUILD_SHARED_LIBS=$(if $(BR2_PREFER_STATIC_LIB),OFF,ON) \
- -DUSE_CCACHE=$(if $(BR2_CCACHE),ON,OFF) \
+ -DBUILD_SHARED_LIBS=$$(if $$(BR2_PREFER_STATIC_LIB),OFF,ON) \
+ -DUSE_CCACHE=$$(if $$(BR2_CCACHE),ON,OFF) \
$$($$(PKG)_CONF_OPT) \
)
endef
@@ -78,15 +78,15 @@ else
define $(2)_CONFIGURE_CMDS
(cd $$($$(PKG)_BUILDDIR) && \
rm -f CMakeCache.txt && \
- PATH=$(BR_PATH) \
- $(HOST_DIR)/usr/bin/cmake $$($$(PKG)_SRCDIR) \
+ PATH=$$(BR_PATH) \
+ $$(HOST_DIR)/usr/bin/cmake $$($$(PKG)_SRCDIR) \
-DCMAKE_INSTALL_SO_NO_EXE=0 \
-DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \
-DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \
-DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY="BOTH" \
-DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE="BOTH" \
-DCMAKE_INSTALL_PREFIX="$$(HOST_DIR)/usr" \
- -DUSE_CCACHE=$(if $(BR2_CCACHE),ON,OFF) \
+ -DUSE_CCACHE=$$(if $$(BR2_CCACHE),ON,OFF) \
-DBUILD_TESTING=OFF \
$$($$(PKG)_CONF_OPT) \
)
@@ -96,7 +96,9 @@ endif
# This must be repeated from inner-generic-package, otherwise we only get
# host-cmake in _DEPENDENCIES because of the following line
-$(2)_DEPENDENCIES ?= $(filter-out host-toolchain $(1),$(patsubst host-host-%,host-%,$(addprefix host-,$($(3)_DEPENDENCIES))))
+ifeq ($(4),host)
+$(2)_DEPENDENCIES ?= $$(filter-out host-toolchain $(1),$$(patsubst host-host-%,host-%,$$(addprefix host-,$$($(3)_DEPENDENCIES))))
+endif
$(2)_DEPENDENCIES += host-cmake
@@ -107,11 +109,11 @@ $(2)_DEPENDENCIES += host-cmake
ifndef $(2)_BUILD_CMDS
ifeq ($(4),target)
define $(2)_BUILD_CMDS
- $(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) -C $$($$(PKG)_BUILDDIR)
+ $$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) -C $$($$(PKG)_BUILDDIR)
endef
else
define $(2)_BUILD_CMDS
- $(HOST_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) -C $$($$(PKG)_BUILDDIR)
+ $$(HOST_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) -C $$($$(PKG)_BUILDDIR)
endef
endif
endif
@@ -122,7 +124,7 @@ endif
#
ifndef $(2)_INSTALL_CMDS
define $(2)_INSTALL_CMDS
- $(HOST_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) $$($$(PKG)_INSTALL_HOST_OPT) -C $$($$(PKG)_BUILDDIR)
+ $$(HOST_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) $$($$(PKG)_INSTALL_HOST_OPT) -C $$($$(PKG)_BUILDDIR)
endef
endif
@@ -132,7 +134,7 @@ endif
#
ifndef $(2)_INSTALL_STAGING_CMDS
define $(2)_INSTALL_STAGING_CMDS
- $(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) $$($$(PKG)_INSTALL_STAGING_OPT) -C $$($$(PKG)_BUILDDIR)
+ $$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) $$($$(PKG)_INSTALL_STAGING_OPT) -C $$($$(PKG)_BUILDDIR)
endef
endif
@@ -142,7 +144,7 @@ endif
#
ifndef $(2)_INSTALL_TARGET_CMDS
define $(2)_INSTALL_TARGET_CMDS
- $(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) $$($$(PKG)_INSTALL_TARGET_OPT) -C $$($$(PKG)_BUILDDIR)
+ $$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) $$($$(PKG)_INSTALL_TARGET_OPT) -C $$($$(PKG)_BUILDDIR)
endef
endif
diff --git a/package/pkg-generic.mk b/package/pkg-generic.mk
index ccd7f3b..3821d33 100644
--- a/package/pkg-generic.mk
+++ b/package/pkg-generic.mk
@@ -282,7 +282,7 @@ define inner-generic-package
$(2)_TYPE = $(4)
$(2)_NAME = $(1)
-$(2)_RAWNAME = $(patsubst host-%,%,$(1))
+$(2)_RAWNAME = $$(patsubst host-%,%,$(1))
# Keep the package version that may contain forward slashes in the _DL_VERSION
# variable, then replace all forward slashes ('/') by underscores ('_') to
@@ -291,15 +291,15 @@ $(2)_RAWNAME = $(patsubst host-%,%,$(1))
# version control system branch or tag, for example remotes/origin/1_10_stable.
ifndef $(2)_VERSION
ifdef $(3)_VERSION
- $(2)_DL_VERSION = $($(3)_VERSION)
- $(2)_VERSION = $(subst /,_,$($(3)_VERSION))
+ $(2)_DL_VERSION = $$($(3)_VERSION)
+ $(2)_VERSION := $$(subst /,_,$$($(3)_VERSION))
else
$(2)_VERSION = undefined
$(2)_DL_VERSION = undefined
endif
else
- $(2)_DL_VERSION = $($(2)_VERSION)
- $(2)_VERSION = $(subst /,_,$($(2)_VERSION))
+ $(2)_DL_VERSION = $$($(2)_VERSION)
+ $(2)_VERSION := $$(subst /,_,$$($(2)_VERSION))
endif
$(2)_BASE_NAME = $(1)-$$($(2)_VERSION)
@@ -323,7 +323,7 @@ endif
ifndef $(2)_SOURCE
ifdef $(3)_SOURCE
- $(2)_SOURCE = $($(3)_SOURCE)
+ $(2)_SOURCE = $$($(3)_SOURCE)
else
$(2)_SOURCE ?= $$($(2)_RAWNAME)-$$($(2)_VERSION).tar.gz
endif
@@ -331,22 +331,22 @@ endif
ifndef $(2)_PATCH
ifdef $(3)_PATCH
- $(2)_PATCH = $($(3)_PATCH)
+ $(2)_PATCH = $$($(3)_PATCH)
endif
endif
ifndef $(2)_SITE
ifdef $(3)_SITE
- $(2)_SITE = $($(3)_SITE)
+ $(2)_SITE = $$($(3)_SITE)
endif
endif
ifndef $(2)_SITE_METHOD
ifdef $(3)_SITE_METHOD
- $(2)_SITE_METHOD = $($(3)_SITE_METHOD)
+ $(2)_SITE_METHOD = $$($(3)_SITE_METHOD)
else
# Try automatic detection using the scheme part of the URI
- $(2)_SITE_METHOD = $(call geturischeme,$($(2)_SITE))
+ $(2)_SITE_METHOD = $$(call geturischeme,$$($(2)_SITE))
endif
endif
@@ -358,7 +358,7 @@ endif
ifndef $(2)_LICENSE
ifdef $(3)_LICENSE
- $(2)_LICENSE = $($(3)_LICENSE)
+ $(2)_LICENSE = $$($(3)_LICENSE)
endif
endif
@@ -366,13 +366,13 @@ $(2)_LICENSE ?= unknown
ifndef $(2)_LICENSE_FILES
ifdef $(3)_LICENSE_FILES
- $(2)_LICENSE_FILES = $($(3)_LICENSE_FILES)
+ $(2)_LICENSE_FILES = $$($(3)_LICENSE_FILES)
endif
endif
ifndef $(2)_REDISTRIBUTE
ifdef $(3)_REDISTRIBUTE
- $(2)_REDISTRIBUTE = $($(3)_REDISTRIBUTE)
+ $(2)_REDISTRIBUTE = $$($(3)_REDISTRIBUTE)
endif
endif
@@ -383,8 +383,10 @@ $(2)_REDISTRIBUTE ?= YES
# dependency
$(2)_ADD_TOOLCHAIN_DEPENDENCY ?= YES
-$(2)_DEPENDENCIES ?= $(filter-out host-toolchain $(1),\
- $(patsubst host-host-%,host-%,$(addprefix host-,$($(3)_DEPENDENCIES))))
+ifeq ($(4),host)
+$(2)_DEPENDENCIES ?= $$(filter-out host-toolchain $(1),\
+ $$(patsubst host-host-%,host-%,$$(addprefix host-,$$($(3)_DEPENDENCIES))))
+endif
ifeq ($(4),target)
ifeq ($$($(2)_ADD_TOOLCHAIN_DEPENDENCY),YES)
$(2)_DEPENDENCIES += toolchain
@@ -414,8 +416,8 @@ $(2)_TARGET_DIRCLEAN = $$($(2)_DIR)/.stamp_dircleaned
# default extract command
$(2)_EXTRACT_CMDS ?= \
- $$(if $$($(2)_SOURCE),$$(INFLATE$$(suffix $$($(2)_SOURCE))) $(DL_DIR)/$$($(2)_SOURCE) | \
- $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $$($(2)_DIR) $(TAR_OPTIONS) -)
+ $$(if $$($(2)_SOURCE),$$(INFLATE$$(suffix $$($(2)_SOURCE))) $$(DL_DIR)/$$($(2)_SOURCE) | \
+ $$(TAR) $$(TAR_STRIP_COMPONENTS)=1 -C $$($(2)_DIR) $$(TAR_OPTIONS) -)
# pre/post-steps hooks
$(2)_PRE_DOWNLOAD_HOOKS ?=
@@ -489,7 +491,7 @@ $(1)-configure: $$($(2)_TARGET_CONFIGURE)
$$($(2)_TARGET_CONFIGURE): | $$($(2)_FINAL_DEPENDENCIES)
$$($(2)_TARGET_SOURCE) $$($(2)_TARGET_RSYNC): | dirs prepare
-ifeq ($(filter $(1),$(DEPENDENCIES_HOST_PREREQ)),)
+ifeq ($$(filter $(1),$$(DEPENDENCIES_HOST_PREREQ)),)
$$($(2)_TARGET_SOURCE) $$($(2)_TARGET_RSYNC): | dependencies
endif
@@ -532,11 +534,11 @@ $(1)-show-depends:
@echo $$($(2)_FINAL_DEPENDENCIES)
$(1)-graph-depends:
- @$(INSTALL) -d $(O)/graphs
- @cd "$(CONFIG_DIR)"; \
- $(TOPDIR)/support/scripts/graph-depends -p $(1) $(BR2_GRAPH_DEPS_OPTS) \
- |tee $(O)/graphs/$$(@).dot \
- |dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(O)/graphs/$$(@).$(BR_GRAPH_OUT)
+ @$$(INSTALL) -d $$(O)/graphs
+ @cd "$$(CONFIG_DIR)"; \
+ $$(TOPDIR)/support/scripts/graph-depends -p $(1) $$(BR2_GRAPH_DEPS_OPTS) \
+ |tee $$(O)/graphs/$$(@).dot \
+ |dot $$(BR2_GRAPH_DOT_OPTS) -T$$(BR_GRAPH_OUT) -o $$(O)/graphs/$$(@).$$(BR_GRAPH_OUT)
$(1)-dirclean: $$($(2)_TARGET_DIRCLEAN)
@@ -570,7 +572,7 @@ $$($(2)_TARGET_RSYNC): PKG=$(2)
$$($(2)_TARGET_RSYNC_SOURCE): SRCDIR=$$($(2)_OVERRIDE_SRCDIR)
$$($(2)_TARGET_RSYNC_SOURCE): PKG=$(2)
$$($(2)_TARGET_PATCH): PKG=$(2)
-$$($(2)_TARGET_PATCH): RAWNAME=$(patsubst host-%,%,$(1))
+$$($(2)_TARGET_PATCH): RAWNAME=$$(patsubst host-%,%,$(1))
$$($(2)_TARGET_PATCH): PKGDIR=$(pkgdir)
$$($(2)_TARGET_EXTRACT): PKG=$(2)
$$($(2)_TARGET_SOURCE): PKG=$(2)
@@ -581,9 +583,9 @@ $$($(2)_TARGET_DIRCLEAN): PKG=$(2)
# kernel case, the bootloaders case, and the normal packages case.
ifeq ($(1),linux)
$(2)_KCONFIG_VAR = BR2_LINUX_KERNEL
-else ifneq ($(filter boot/%,$(pkgdir)),)
+else ifneq ($$(filter boot/%,$(pkgdir)),)
$(2)_KCONFIG_VAR = BR2_TARGET_$(2)
-else ifneq ($(filter toolchain/%,$(pkgdir)),)
+else ifneq ($$(filter toolchain/%,$(pkgdir)),)
$(2)_KCONFIG_VAR = BR2_$(2)
else
$(2)_KCONFIG_VAR = BR2_PACKAGE_$(2)
@@ -599,7 +601,7 @@ ifeq ($$($(2)_REDISTRIBUTE),YES)
ifneq ($$($(2)_SITE_METHOD),local)
ifneq ($$($(2)_SITE_METHOD),override)
# Packages that have a tarball need it downloaded and extracted beforehand
-$(1)-legal-info: $(1)-extract $(REDIST_SOURCES_DIR_$(call UPPERCASE,$(4)))
+$(1)-legal-info: $(1)-extract $$(REDIST_SOURCES_DIR_$$(call UPPERCASE,$(4)))
$(2)_MANIFEST_TARBALL = $$($(2)_SOURCE)
endif
endif
@@ -609,40 +611,37 @@ $(2)_MANIFEST_TARBALL ?= not saved
# legal-info: produce legally relevant info.
$(1)-legal-info:
# Packages without a source are assumed to be part of Buildroot, skip them.
- $(foreach hook,$($(2)_PRE_LEGAL_INFO_HOOKS),$(call $(hook))$(sep))
-ifneq ($(call qstrip,$$($(2)_SOURCE)),)
+ $$(foreach hook,$$($(2)_PRE_LEGAL_INFO_HOOKS),$$(call $$(hook))$$(sep))
+ifneq ($$(call qstrip,$$($(2)_SOURCE)),)
ifeq ($$($(2)_SITE_METHOD),local)
# Packages without a tarball: don't save and warn
- @$(call legal-warning-pkg-savednothing,$$($(2)_RAWNAME),local)
+ @$$(call legal-warning-pkg-savednothing,$$($(2)_RAWNAME),local)
else ifneq ($$($(2)_OVERRIDE_SRCDIR),)
- @$(call legal-warning-pkg-savednothing,$$($(2)_RAWNAME),override)
+ @$$(call legal-warning-pkg-savednothing,$$($(2)_RAWNAME),override)
else
# Other packages
# Save license files if defined
-ifeq ($(call qstrip,$$($(2)_LICENSE_FILES)),)
- @$(call legal-license-nofiles,$$($(2)_RAWNAME),$(call UPPERCASE,$(4)))
- @$(call legal-warning-pkg,$$($(2)_RAWNAME),cannot save license ($(2)_LICENSE_FILES not defined))
+ifeq ($$(call qstrip,$$($(2)_LICENSE_FILES)),)
+ @$$(call legal-license-nofiles,$$($(2)_RAWNAME),$$(call UPPERCASE,$(4)))
+ @$$(call legal-warning-pkg,$$($(2)_RAWNAME),cannot save license ($(2)_LICENSE_FILES not defined))
else
-# Double dollar signs are really needed here, to catch host packages
-# without explicit HOST_FOO_LICENSE_FILES assignment, also in case they
-# have multiple license files.
- @$$(foreach F,$$($(2)_LICENSE_FILES),$$(call legal-license-file,$$($(2)_RAWNAME),$$(F),$$($(2)_DIR)/$$(F),$(call UPPERCASE,$(4)))$$(sep))
+ @$$(foreach F,$$($(2)_LICENSE_FILES),$$(call legal-license-file,$$($(2)_RAWNAME),$$(F),$$($(2)_DIR)/$$(F),$$(call UPPERCASE,$(4)))$$(sep))
endif # license files
ifeq ($$($(2)_REDISTRIBUTE),YES)
# Copy the source tarball (just hardlink if possible)
- @cp -l $(DL_DIR)/$$($(2)_SOURCE) $(REDIST_SOURCES_DIR_$(call UPPERCASE,$(4))) 2>/dev/null || \
- cp $(DL_DIR)/$$($(2)_SOURCE) $(REDIST_SOURCES_DIR_$(call UPPERCASE,$(4)))
+ @cp -l $$(DL_DIR)/$$($(2)_SOURCE) $$(REDIST_SOURCES_DIR_$$(call UPPERCASE,$(4))) 2>/dev/null || \
+ cp $$(DL_DIR)/$$($(2)_SOURCE) $$(REDIST_SOURCES_DIR_$$(call UPPERCASE,$(4)))
endif # redistribute
endif # other packages
- @$(call legal-manifest,$$($(2)_RAWNAME),$$($(2)_VERSION),$$($(2)_LICENSE),$$($(2)_MANIFEST_LICENSE_FILES),$$($(2)_MANIFEST_TARBALL),$(call UPPERCASE,$(4)))
-endif # ifneq ($(call qstrip,$$($(2)_SOURCE)),)
- $(foreach hook,$($(2)_POST_LEGAL_INFO_HOOKS),$(call $(hook))$(sep))
+ @$$(call legal-manifest,$$($(2)_RAWNAME),$$($(2)_VERSION),$$($(2)_LICENSE),$$($(2)_MANIFEST_LICENSE_FILES),$$($(2)_MANIFEST_TARBALL),$$(call UPPERCASE,$(4)))
+endif # ifneq ($$(call qstrip,$$($(2)_SOURCE)),)
+ $$(foreach hook,$$($(2)_POST_LEGAL_INFO_HOOKS),$$(call $$(hook))$$(sep))
# add package to the general list of targets if requested by the buildroot
# configuration
@@ -685,8 +684,8 @@ endif # SITE_METHOD
# ZCAT="gzip -d -c", and to check for the dependency we only want 'gzip'.
# Do not add xzcat to the list of required dependencies, as it gets built
# automatically if it isn't found.
-ifneq ($(call suitable-extractor,$($(2)_SOURCE)),$(XZCAT))
-DL_TOOLS_DEPENDENCIES += $(firstword $(call suitable-extractor,$($(2)_SOURCE)))
+ifneq ($$(call suitable-extractor,$$($(2)_SOURCE)),$$(XZCAT))
+DL_TOOLS_DEPENDENCIES += $$(firstword $$(call suitable-extractor,$$($(2)_SOURCE)))
endif
endif # $(2)_KCONFIG_VAR
diff --git a/package/pkg-luarocks.mk b/package/pkg-luarocks.mk
index 7010381..b24a4c5 100644
--- a/package/pkg-luarocks.mk
+++ b/package/pkg-luarocks.mk
@@ -34,10 +34,10 @@
define inner-luarocks-package
$(2)_BUILD_OPT ?=
-$(2)_SUBDIR ?= $(1)-$(shell echo "$($(3)_VERSION)" | sed -e "s/-[0-9]$$//")
-$(2)_ROCKSPEC ?= $(1)-$($(3)_VERSION).rockspec
-$(2)_SOURCE ?= $(1)-$($(3)_VERSION).src.rock
-$(2)_SITE ?= $(call qstrip,$(BR2_LUAROCKS_MIRROR))
+$(2)_SUBDIR ?= $(1)-$$(shell echo "$$($(3)_VERSION)" | sed -e "s/-[0-9]$$$$//")
+$(2)_ROCKSPEC ?= $(1)-$$($(3)_VERSION).rockspec
+$(2)_SOURCE ?= $(1)-$$($(3)_VERSION).src.rock
+$(2)_SITE ?= $$(call qstrip,$$(BR2_LUAROCKS_MIRROR))
# Since we do not support host-luarocks-package, we know this is
# a target package, and can just add the required dependencies
@@ -49,7 +49,7 @@ $(2)_DEPENDENCIES += host-luarocks luainterpreter
ifndef $(2)_EXTRACT_CMDS
define $(2)_EXTRACT_CMDS
cd $$($(2)_DIR)/.. && \
- $$(LUAROCKS_RUN) unpack --force $(DL_DIR)/$$($(2)_SOURCE)
+ $$(LUAROCKS_RUN) unpack --force $$(DL_DIR)/$$($(2)_SOURCE)
endef
endif
diff --git a/package/pkg-perl.mk b/package/pkg-perl.mk
index 447f364..5cfdc77 100644
--- a/package/pkg-perl.mk
+++ b/package/pkg-perl.mk
@@ -51,18 +51,18 @@ define $(2)_CONFIGURE_CMDS
cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] ; then \
PERL_MM_USE_DEFAULT=1 \
perl Build.PL \
- --config ar="$(TARGET_AR)" \
- --config full_ar="$(TARGET_AR)" \
- --config cc="$(TARGET_CC)" \
- --config ccflags="$(TARGET_CFLAGS)" \
- --config ld="$(TARGET_CC)" \
- --config lddlflags="-shared $(TARGET_LDFLAGS)" \
- --config ldflags="$(TARGET_LDFLAGS)" \
- --include_dirs $$(STAGING_DIR)/usr/lib/perl5/$$(PERL_VERSION)/$(PERL_ARCHNAME)/CORE \
+ --config ar="$$(TARGET_AR)" \
+ --config full_ar="$$(TARGET_AR)" \
+ --config cc="$$(TARGET_CC)" \
+ --config ccflags="$$(TARGET_CFLAGS)" \
+ --config ld="$$(TARGET_CC)" \
+ --config lddlflags="-shared $$(TARGET_LDFLAGS)" \
+ --config ldflags="$$(TARGET_LDFLAGS)" \
+ --include_dirs $$(STAGING_DIR)/usr/lib/perl5/$$(PERL_VERSION)/$$(PERL_ARCHNAME)/CORE \
--destdir $$(TARGET_DIR) \
--installdirs vendor \
--install_path lib=/usr/lib/perl5/site_perl/$$(PERL_VERSION) \
- --install_path arch=/usr/lib/perl5/site_perl/$$(PERL_VERSION)/$(PERL_ARCHNAME) \
+ --install_path arch=/usr/lib/perl5/site_perl/$$(PERL_VERSION)/$$(PERL_ARCHNAME) \
--install_path bin=/usr/bin \
--install_path script=/usr/bin \
--install_path bindoc=/usr/share/man/man1 \
@@ -72,17 +72,17 @@ define $(2)_CONFIGURE_CMDS
PERL_MM_USE_DEFAULT=1 \
PERL_AUTOINSTALL=--skipdeps \
perl Makefile.PL \
- AR="$(TARGET_AR)" \
- FULL_AR="$(TARGET_AR)" \
- CC="$(TARGET_CC)" \
- CCFLAGS="$(TARGET_CFLAGS)" \
- LD="$(TARGET_CC)" \
- LDDLFLAGS="-shared $(TARGET_LDFLAGS)" \
- LDFLAGS="$(TARGET_LDFLAGS)" \
+ AR="$$(TARGET_AR)" \
+ FULL_AR="$$(TARGET_AR)" \
+ CC="$$(TARGET_CC)" \
+ CCFLAGS="$$(TARGET_CFLAGS)" \
+ LD="$$(TARGET_CC)" \
+ LDDLFLAGS="-shared $$(TARGET_LDFLAGS)" \
+ LDFLAGS="$$(TARGET_LDFLAGS)" \
DESTDIR=$$(TARGET_DIR) \
INSTALLDIRS=vendor \
INSTALLVENDORLIB=/usr/lib/perl5/site_perl/$$(PERL_VERSION) \
- INSTALLVENDORARCH=/usr/lib/perl5/site_perl/$$(PERL_VERSION)/$(PERL_ARCHNAME) \
+ INSTALLVENDORARCH=/usr/lib/perl5/site_perl/$$(PERL_VERSION)/$$(PERL_ARCHNAME) \
INSTALLVENDORBIN=/usr/bin \
INSTALLVENDORSCRIPT=/usr/bin \
INSTALLVENDORMAN1DIR=/usr/share/man/man1 \
@@ -125,8 +125,8 @@ define $(2)_BUILD_CMDS
cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] ; then \
perl Build $$($(2)_BUILD_OPT) build; \
else \
- $(MAKE1) \
- PERL_INC=$$(STAGING_DIR)/usr/lib/perl5/$$(PERL_VERSION)/$(PERL_ARCHNAME)/CORE \
+ $$(MAKE1) \
+ PERL_INC=$$(STAGING_DIR)/usr/lib/perl5/$$(PERL_VERSION)/$$(PERL_ARCHNAME)/CORE \
$$($(2)_BUILD_OPT) pure_all; \
fi
endef
@@ -137,7 +137,7 @@ define $(2)_BUILD_CMDS
cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] ; then \
perl Build $$($(2)_BUILD_OPT) build; \
else \
- $(MAKE1) $$($(2)_BUILD_OPT) pure_all; \
+ $$(MAKE1) $$($(2)_BUILD_OPT) pure_all; \
fi
endef
endif
@@ -152,7 +152,7 @@ define $(2)_INSTALL_CMDS
cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] ; then \
perl Build $$($(2)_INSTALL_TARGET_OPT) install; \
else \
- $(MAKE1) $$($(2)_INSTALL_TARGET_OPT) pure_install; \
+ $$(MAKE1) $$($(2)_INSTALL_TARGET_OPT) pure_install; \
fi
endef
endif
@@ -166,7 +166,7 @@ define $(2)_INSTALL_TARGET_CMDS
cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] ; then \
perl Build $$($(2)_INSTALL_TARGET_OPT) install; \
else \
- $(MAKE1) $$($(2)_INSTALL_TARGET_OPT) pure_install; \
+ $$(MAKE1) $$($(2)_INSTALL_TARGET_OPT) pure_install; \
fi
endef
endif
diff --git a/package/pkg-python.mk b/package/pkg-python.mk
index e903c23..9e6160f 100644
--- a/package/pkg-python.mk
+++ b/package/pkg-python.mk
@@ -82,7 +82,7 @@ HOST_PKG_PYTHON_SETUPTOOLS_INSTALL_OPT = \
define inner-python-package
-$(2)_SRCDIR = $$($(2)_DIR)/$($(2)_SUBDIR)
+$(2)_SRCDIR = $$($(2)_DIR)/$$($(2)_SUBDIR)
$(2)_BUILDDIR = $$($(2)_SRCDIR)
$(2)_ENV ?=
@@ -91,7 +91,7 @@ $(2)_INSTALL_OPT ?=
ifndef $(2)_SETUP_TYPE
ifdef $(3)_SETUP_TYPE
- $(2)_SETUP_TYPE = $($(3)_SETUP_TYPE)
+ $(2)_SETUP_TYPE = $$($(3)_SETUP_TYPE)
else
$$(error "$(2)_SETUP_TYPE must be set")
endif
@@ -138,7 +138,9 @@ endif
# depending on the package characteristics, and shouldn't be derived
# automatically from the dependencies of the corresponding target
# package.
-$(2)_DEPENDENCIES ?= $(filter-out host-python host-python3 host-python-setuptools host-toolchain $(1),$(patsubst host-host-%,host-%,$(addprefix host-,$($(3)_DEPENDENCIES))))
+ifeq ($(4),host)
+$(2)_DEPENDENCIES ?= $$(filter-out host-python host-python3 host-python-setuptools host-toolchain $(1),$$(patsubst host-host-%,host-%,$$(addprefix host-,$$($(3)_DEPENDENCIES))))
+endif
# Target packages need both the python interpreter on the target (for
# runtime) and the python interpreter on the host (for
@@ -155,19 +157,19 @@ $(2)_DEPENDENCIES ?= $(filter-out host-python host-python3 host-python-setuptool
# - otherwise, we depend on the one requested by *_NEEDS_HOST_PYTHON.
#
ifeq ($(4),target)
-$(2)_DEPENDENCIES += $(if $(BR2_PACKAGE_PYTHON3),host-python3 python3,host-python python)
+$(2)_DEPENDENCIES += $$(if $$(BR2_PACKAGE_PYTHON3),host-python3 python3,host-python python)
else
-ifeq ($($(2)_NEEDS_HOST_PYTHON),)
-$(2)_DEPENDENCIES += $(if $(BR2_PACKAGE_PYTHON3),host-python3,host-python)
+ifeq ($$($(2)_NEEDS_HOST_PYTHON),)
+$(2)_DEPENDENCIES += $$(if $$(BR2_PACKAGE_PYTHON3),host-python3,host-python)
else
-ifeq ($($(2)_NEEDS_HOST_PYTHON),python2)
+ifeq ($$($(2)_NEEDS_HOST_PYTHON),python2)
$(2)_DEPENDENCIES += host-python
-else ifeq ($($(2)_NEEDS_HOST_PYTHON),python3)
+else ifeq ($$($(2)_NEEDS_HOST_PYTHON),python3)
$(2)_DEPENDENCIES += host-python3
else
-$$(error Incorrect value '$($(2)_NEEDS_HOST_PYTHON)' for $(2)_NEEDS_HOST_PYTHON)
+$$(error Incorrect value '$$($(2)_NEEDS_HOST_PYTHON)' for $(2)_NEEDS_HOST_PYTHON)
endif
-endif # ($($(2)_NEEDS_HOST_PYTHON),)
+endif # ($$($(2)_NEEDS_HOST_PYTHON),)
endif # ($(4),target)
# Setuptools based packages will need host-python-setuptools (both
@@ -196,12 +198,12 @@ endif
# - otherwise, we use the one requested by *_NEEDS_HOST_PYTHON.
#
ifeq ($(4),target)
-$(2)_PYTHON_INTERPRETER = $(HOST_DIR)/usr/bin/python
+$(2)_PYTHON_INTERPRETER = $$(HOST_DIR)/usr/bin/python
else
-ifeq ($($(2)_NEEDS_HOST_PYTHON),)
-$(2)_PYTHON_INTERPRETER = $(HOST_DIR)/usr/bin/python
+ifeq ($$($(2)_NEEDS_HOST_PYTHON),)
+$(2)_PYTHON_INTERPRETER = $$(HOST_DIR)/usr/bin/python
else
-$(2)_PYTHON_INTERPRETER = $(HOST_DIR)/usr/bin/$($(2)_NEEDS_HOST_PYTHON)
+$(2)_PYTHON_INTERPRETER = $$(HOST_DIR)/usr/bin/$$($(2)_NEEDS_HOST_PYTHON)
endif
endif
diff --git a/package/pkg-virtual.mk b/package/pkg-virtual.mk
index 617e5f2..56e2d04 100644
--- a/package/pkg-virtual.mk
+++ b/package/pkg-virtual.mk
@@ -35,8 +35,8 @@
define inner-virtual-package
# Ensure the virtual package has an implementation defined.
-ifeq ($(BR2_PACKAGE_HAS_$(2)),y)
-ifeq ($(call qstrip,$(BR2_PACKAGE_PROVIDES_$(2))),)
+ifeq ($$(BR2_PACKAGE_HAS_$(2)),y)
+ifeq ($$(call qstrip,$$(BR2_PACKAGE_PROVIDES_$(2))),)
$$(error No implementation selected for virtual package $(1). Configuration error)
endif
endif
@@ -50,11 +50,13 @@ HOST_$(3)_VERSION = virtual
# This must be repeated from inner-generic-package, otherwise we get an empty
# _DEPENDENCIES
-$(2)_DEPENDENCIES ?= $(filter-out host-toolchain $(1),\
- $(patsubst host-host-%,host-%,$(addprefix host-,$($(3)_DEPENDENCIES))))
+ifeq ($(4),host)
+$(2)_DEPENDENCIES ?= $$(filter-out host-toolchain $(1),\
+ $$(patsubst host-host-%,host-%,$$(addprefix host-,$$($(3)_DEPENDENCIES))))
+endif
# Add dependency against the provider
-$(2)_DEPENDENCIES += $(call qstrip,$(BR2_PACKAGE_PROVIDES_$(2)))
+$(2)_DEPENDENCIES += $$(call qstrip,$$(BR2_PACKAGE_PROVIDES_$(2)))
# Call the generic package infrastructure to generate the necessary
# make targets
More information about the buildroot
mailing list