[Buildroot] [git commit] Fix typos in comment blocks

[Thomas Petazzoni]

commit: http://git.buildroot.net/buildroot/commit/?id=5b686a0674e5c42b1b5dfbcefec9b6002a7ae814
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master

[Thomas: fix issues noticed by Arnout:
  - Rewrap the linux/Config.in paragraph
  - Revert the "is a toolchain dependency" -> "has a toolchain
    dependency" change from pkg-generic.mk, as the original was
    correct.]

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 Makefile                            |    2 +-
 board/avnet/zedboard/readme.txt     |    4 ++--
 boot/uboot/uboot.mk                 |    2 +-
 linux/Config.in                     |   12 ++++++------
 package/Makefile.in                 |    2 +-
 support/download/check-hash         |    2 +-
 support/scripts/gen-manual-lists.py |    2 +-
 7 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/Makefile b/Makefile
index 2ad8832..9db52a8 100644
--- a/Makefile
+++ b/Makefile
@@ -144,7 +144,7 @@ else
   $(shell echo BR2_EXTERNAL ?= $(BR2_EXTERNAL) > $(BR2_EXTERNAL_FILE))
 endif
 
-# To make sure the the environment variable overrides the .config option,
+# To make sure that the environment variable overrides the .config option,
 # set this before including .config.
 ifneq ($(BR2_DL_DIR),)
 DL_DIR := $(BR2_DL_DIR)
diff --git a/board/avnet/zedboard/readme.txt b/board/avnet/zedboard/readme.txt
index fe8c75e..a3f1f3e 100644
--- a/board/avnet/zedboard/readme.txt
+++ b/board/avnet/zedboard/readme.txt
@@ -6,7 +6,7 @@ Zedboard information including schematics, reference designs, and manuals are
 available from http://www.zedboard.org .
 
 The U-Boot firmware for the Xilinx Zynq All Programmable SoC depends
-on some propietary code. This dependency consists of a pair of
+on some proprietary code. This dependency consists of a pair of
 files are available from the Xilinx SDK installation.
 
 You will need these files from Xilinx SDK installation to generate
@@ -53,7 +53,7 @@ the clean, or uboot-dirclean targets are made.
 
 Resulting system
 ----------------
-A FAT32 partition should be created at the beggining of the SD Card
+A FAT32 partition should be created at the beginning of the SD Card
 and the following files should be installed:
 	/boot.bin
 	/devicetree.dtb
diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk
index df991e7..0272d9e 100644
--- a/boot/uboot/uboot.mk
+++ b/boot/uboot/uboot.mk
@@ -177,7 +177,7 @@ ifeq ($(BR2_TARGET_UBOOT),y)
 # we NEED a board name unless we're at make source
 ifeq ($(filter source,$(MAKECMDGOALS)),)
 ifeq ($(UBOOT_BOARD_NAME),)
-$(error NO U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
+$(error No U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
 endif
 
 ifeq ($(BR2_TARGET_UBOOT_CUSTOM_VERSION),y)
diff --git a/linux/Config.in b/linux/Config.in
index c83a3f5..817139b 100644
--- a/linux/Config.in
+++ b/linux/Config.in
@@ -288,12 +288,12 @@ if BR2_LINUX_KERNEL_DTS_SUPPORT
 # We have mainly three cases when it comes to device tree support:
 #   1) We don't want any support at all. Then the ..DTS_SUPPORT
 #      variable won't be set
-#   2) We want device tree support, so we need the user to enter
-#      the device tree name or the the path to the custom device
-#      he uses, but the kernel abstracts this from us and only
-#      build an image that looks like a regular kernel image. In
-#      this case, we only need to derive the kernel image name from
-#      the given device tree name, and all the rest is as usual
+#   2) We want device tree support, so we need the user to enter the
+#      device tree name or the path to the custom device he uses, but
+#      the kernel abstracts this from us and only build an image that
+#      looks like a regular kernel image. In this case, we only need
+#      to derive the kernel image name from the given device tree
+#      name, and all the rest is as usual
 #   3) We want device tree support, but the kernel requires us to
 #      build the device tree blob separately. In this case, some
 #      more logic will be needed.
diff --git a/package/Makefile.in b/package/Makefile.in
index fc57427..8e471ee 100644
--- a/package/Makefile.in
+++ b/package/Makefile.in
@@ -6,7 +6,7 @@ HOSTMAKE = $(MAKE)
 endif
 HOSTMAKE := $(shell which $(HOSTMAKE) || type -p $(HOSTMAKE) || echo make)
 
-# If BR2_LEVEL is 0, scale the maximum concurrency with the number of
+# If BR2_JLEVEL is 0, scale the maximum concurrency with the number of
 # CPUs. An additional job is used in order to keep processors busy
 # while waiting on I/O.
 # If the number of processors is not available, assume one.
diff --git a/support/download/check-hash b/support/download/check-hash
index d37f1cd..678a7ef 100755
--- a/support/download/check-hash
+++ b/support/download/check-hash
@@ -3,7 +3,7 @@ set -e
 
 # Helper to check a file matches its known hash
 # Call it with:
-#   $1: the path of the file containing all the the expected hashes
+#   $1: the path of the file containing all the expected hashes
 #   $2: the full path to the temporary file that was downloaded, and
 #       that is to be checked
 #   $3: the final basename of the file, to which it will be ultimately
diff --git a/support/scripts/gen-manual-lists.py b/support/scripts/gen-manual-lists.py
index 95c10dc..ec59030 100644
--- a/support/scripts/gen-manual-lists.py
+++ b/support/scripts/gen-manual-lists.py
@@ -87,7 +87,7 @@ def get_symbol_parents(item, root=None, enable_choice=False):
     """ Return the list of the item's parents. The last item of the list is
     the closest parent, the first the furthest.
 
-    :param item:          Item from which the the parent list is generated
+    :param item:          Item from which the parent list is generated
     :param root:          Root item stopping the search (not included in the
                           parent list)
     :param enable_choice: Flag enabling choices to appear in the parent list