[Buildroot] [PATCH 09/12] fs/iso9660: add support for isolinux

Yann E. MORIN yann.morin.1998 at free.fr
Fri Jun 5 22:38:56 UTC 2015


Thomas, All,

On 2015-06-04 17:05 +0200, Thomas Petazzoni spake thusly:
> Until now, the ISO9660 image generation logic was only supporting the
> Grub bootloader. This commit adds support to use isolinux (from
> syslinux) instead of grub, as an option.
> 
> From a Config.in point of view, we switch from having
> BR2_TARGET_ROOTFS_ISO9660 select BR2_TARGET_GRUB to using a 'depends
> on'. This is because for isolinux, we would need to select
> BR2_TARGET_SYSLINUX_ISOLINUX, but BR2_TARGET_SYSLINUX_ISOLINUX is part
> of a Kconfig 'choice', so we can't do a select. So instead, the
> BR2_TARGET_ROOTFS_ISO9660 now depends on either BR2_TARGET_GRUB or
> BR2_TARGET_SYSLINUX_ISOLINUX being available.
> 
> The .mk file is re-organized a bit to be a bit more generic:
> 
>  - a variable called ROOTFS_ISO9660_BOOTLOADER_CONFIG_PATH is
>    introduced to reflect the path to the bootloader configuration file
>    (which is later modified to replace __KERNEL_PATH__ and
>    __INITRD_PATH__ to the appropriate values)
> 
>  - a variable called ROOTFS_ISO9660_BOOT_IMAGE is introduced to give
>    the path to the bootloader-specific boot image, as needed by
>    genisoimage -b option.
> 
>  - a variable called ROOTFS_ISO9660_INSTALL_BOOTLOADER is introduced
>    with the commands needed to do the bootloader-specific installation
>    steps

This patch is quite large, and could benefit from being splitted in three:

  - first patch introduces the ROOTFS_ISO9660_BOOTLOADER_CONFIG_PATH and
    ROOTFS_ISO9660_BOOT_IMAGE variables

  - second patch to introduce the bootloader choice, but with only a
    single entrey 'grub', and the .mk re-organisation (still with only
    grub handling),

  - then a third patch adds isolinux support.

That'd make it easier to review...

Since I'm quite interested in the end-result of this series
(multi-format bootable images), I can help if you don;t have time. Just
ping me... ;-)

(I tried to see if previous patches could be splitted, but you already
did a pretty good job at that! :-) )

> This patch is based on previous patches submitted by Jerome Sagnole
> <jean.sorgemoel at laposte.net> and Noé Rubinstein
> <nrubinstein at aldebaran.com>.

Thanks guys! :-)

> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
[--SNIP--]
> diff --git a/fs/iso9660/iso9660.mk b/fs/iso9660/iso9660.mk
> index a3572e2..c95485c 100644
> --- a/fs/iso9660/iso9660.mk
> +++ b/fs/iso9660/iso9660.mk
> @@ -40,32 +40,56 @@ else
>  ROOTFS_ISO9660_TARGET_DIR = $(TARGET_DIR)
>  endif
>  
> -define ROOTFS_ISO9660_PREPARATION
> +ifeq ($(BR2_TARGET_ROOTFS_ISO9660_GRUB),y)
> +ROOTFS_ISO9660_DEPENDENCIES += grub
> +ROOTFS_ISO9660_BOOTLOADER_CONFIG_PATH = \
> +	$(ROOTFS_ISO9660_TARGET_DIR)/boot/grub/menu.lst
> +ROOTFS_ISO9660_BOOT_IMAGE = boot/grub/stage2_eltorito
> +define ROOTFS_ISO9660_INSTALL_BOOTLOADER
>  	$(INSTALL) -D -m 0644 $(GRUB_DIR)/stage2/stage2_eltorito \
>  		$(ROOTFS_ISO9660_TARGET_DIR)/boot/grub/stage2_eltorito
> +endef
> +else ifeq ($(BR2_TARGET_ROOTFS_ISO9660_ISOLINUX),y)
> +ROOTFS_ISO9660_DEPENDENCIES += syslinux
> +ROOTFS_ISO9660_BOOTLOADER_CONFIG_PATH = \
> +	$(ROOTFS_ISO9660_TARGET_DIR)/isolinux/isolinux.cfg
> +ROOTFS_ISO9660_BOOT_IMAGE = isolinux/isolinux.bin
> +define ROOTFS_ISO9660_INSTALL_BOOTLOADER
> +	$(INSTALL) -D -m 0644 $(SYSLINUX_DIR)/bios/core/isolinux.bin \
> +		$(ROOTFS_ISO9660_TARGET_DIR)/isolinux/isolinux.bin
> +	$(INSTALL) -D -m 0644 $(SYSLINUX_DIR)/bios/com32/elflink/ldlinux/ldlinux.c32 \
> +		$(ROOTFS_ISO9660_TARGET_DIR)/isolinux/ldlinux.c32

syslinux/isolinux already installs isolinux.bin and the .c32 modules in
$(BINARIES_DIR)/syslinux, so you should probably get them from there,
rather than cherry-pick from the package dir (in case a later version
bump moves them, like it did when I last updated the package).

Except ldlinux.c32 is not systematically installed; we should probably
change that first (what use would we have of a syslinux/isolinux that
can't load a Linux kernel? :-] ).

> +endef
> +endif
> +
> +define ROOTFS_ISO9660_PREPARATION
>  	$(INSTALL) -D -m 0644 $(ROOTFS_ISO9660_BOOT_MENU) \
> -		$(ROOTFS_ISO9660_TARGET_DIR)/boot/grub/menu.lst
> +		$(ROOTFS_ISO9660_BOOTLOADER_CONFIG_PATH)
>  	$(SED) "s%__KERNEL_PATH__%/boot/$(LINUX_IMAGE_NAME)%" \
> -		$(ROOTFS_ISO9660_TARGET_DIR)/boot/grub/menu.lst
> +		$(ROOTFS_ISO9660_BOOTLOADER_CONFIG_PATH)
> +	$(ROOTFS_ISO9660_INSTALL_BOOTLOADER)
>  endef
>  
>  ROOTFS_ISO9660_PRE_GEN_HOOKS += ROOTFS_ISO9660_PREPARATION
>  
> -# Splash screen disabling
> +# Grub splash screen disabling
> +ifeq ($(BR2_TARGET_ROOTFS_ISO9660_GRUB),y)
>  ifeq ($(BR2_TARGET_GRUB_SPLASH),)
>  define ROOTFS_ISO9660_DISABLE_SPLASHSCREEN
> -	$(SED) '/^splashimage/d' $(ROOTFS_ISO9660_TARGET_DIR)/boot/grub/menu.lst
> +	$(SED) '/^splashimage/d' $(ROOTFS_ISO9660_BOOTLOADER_CONFIG_PATH)
>  endef
>  ROOTFS_ISO9660_PRE_GEN_HOOKS += ROOTFS_ISO9660_DISABLE_SPLASHSCREEN
>  endif
> +endif
>  
>  define ROOTFS_ISO9660_DISABLE_EXTERNAL_INITRD
> -	$(SED) '/__INITRD_PATH__/d'  $(ROOTFS_ISO9660_TARGET_DIR)/boot/grub/menu.lst
> +	$(SED) '/__INITRD_PATH__/d'  $(ROOTFS_ISO9660_BOOTLOADER_CONFIG_PATH)
>  endef
>  
>  ifeq ($(ROOTFS_ISO9660_USE_INITRD),YES)
>  
> -# Copy splashscreen to temporary filesystem
> +# Copy Grub splashscreen to temporary filesystem
> +ifeq ($(BR2_TARGET_ROOTFS_ISO9660_GRUB),y)
>  ifeq ($(BR2_TARGET_GRUB_SPLASH),y)
>  define ROOTFS_ISO9660_INSTALL_SPLASHSCREEN
>  	$(INSTALL) -D -m 0644 boot/grub/splash.xpm.gz \
> @@ -73,6 +97,7 @@ define ROOTFS_ISO9660_INSTALL_SPLASHSCREEN
>  endef
>  ROOTFS_ISO9660_PRE_GEN_HOOKS += ROOTFS_ISO9660_INSTALL_SPLASHSCREEN
>  endif
> +endif
>  
>  # Copy the kernel to temporary filesystem
>  define ROOTFS_ISO9660_COPY_KERNEL
> @@ -89,7 +114,7 @@ define ROOTFS_ISO9660_COPY_INITRD
>  	$(INSTALL) -D -m 0644 $(BINARIES_DIR)/rootfs.cpio$(ROOTFS_CPIO_COMPRESS_EXT) \
>  		$(ROOTFS_ISO9660_TARGET_DIR)/boot/initrd
>  	$(SED) "s%__INITRD_PATH__%/boot/initrd%" \
> -		$(ROOTFS_ISO9660_TARGET_DIR)/boot/grub/menu.lst
> +		$(ROOTFS_ISO9660_BOOTLOADER_CONFIG_PATH)
>  endef
>  ROOTFS_ISO9660_PRE_GEN_HOOKS += ROOTFS_ISO9660_COPY_INITRD
>  else
> @@ -104,7 +129,7 @@ endif # BR2_TARGET_ROOTFS_ISO9660_INITRD
>  
>  
>  define ROOTFS_ISO9660_CMD
> -	$(HOST_DIR)/usr/bin/genisoimage -J -R -b boot/grub/stage2_eltorito \
> +	$(HOST_DIR)/usr/bin/genisoimage -J -R -b $(ROOTFS_ISO9660_BOOT_IMAGE) \
>  		-no-emul-boot -boot-load-size 4 -boot-info-table \
>  		-o $@ $(ROOTFS_ISO9660_TARGET_DIR)
>  endef
> diff --git a/fs/iso9660/isolinux.cfg b/fs/iso9660/isolinux.cfg
> new file mode 100644
> index 0000000..2bdf48b
> --- /dev/null
> +++ b/fs/iso9660/isolinux.cfg
> @@ -0,0 +1,6 @@
> +default 1
> +display sample.msg

Where's that file comming from?

Also, there is the possibility for syslinux/isolinux to display
graphics, too, but it is much more invvolved (but that'd be great!)

Regards,
Yann E. MORIN.

> +label 1
> +      kernel __KERNEL_PATH__
> +      append initrd=__INITRD_PATH__
> +      append root=/dev/sr0
> -- 
> 2.1.0
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'



More information about the buildroot mailing list