[Buildroot] [git commit] configs: add defconfig for Freescale i.MX31 PDK

[Thomas Petazzoni]

commit: http://git.buildroot.net/buildroot/commit/?id=c7ee1bb4d46cd8382f079750fb414b46e1237c53
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master

The i.MX31 Product Development Kit (or PDK) is Freescale development board
based on the i.MX31 application processor.

This defconfig is based on mainline kernel v3.15.10, and is aimed at a PDK in
"3 stack" configuration, with CPU engine board, personality board and debug
board.

Signed-off-by: Vincent Stehlé <vincent.stehle at freescale.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 board/freescale/imx31_3stack/readme.txt  |   92 ++++++++++++++++++++++++++++++
 configs/freescale_imx31_3stack_defconfig |   22 +++++++
 2 files changed, 114 insertions(+), 0 deletions(-)

diff --git a/board/freescale/imx31_3stack/readme.txt b/board/freescale/imx31_3stack/readme.txt
new file mode 100644
index 0000000..4f8f393
--- /dev/null
+++ b/board/freescale/imx31_3stack/readme.txt
@@ -0,0 +1,92 @@
+**************************************
+Freescale i.MX31 PDK development board
+**************************************
+
+This file documents the Buildroot support for the Freescale i.MX31 PDK in "3
+stack" configuration.
+
+The i.MX31 Product Development Kit (or PDK) is Freescale development board [1]
+based on the i.MX31 application processor [2].
+
+For more details on the i.MX31 PDK board, refer to the User's Guide [3].
+
+Build
+=====
+
+First, configure Buildroot for your i.MX31 PDK board:
+
+  make freescale_imx31_3stack_defconfig
+
+Build all components:
+
+  make
+
+You will find in ./output/images/ the following files:
+  - rootfs.cpio
+  - rootfs.cpio.gz
+  - rootfs.tar
+  - zImage
+
+The generated zImage does include the rootfs.
+
+Boot the PDK board
+==================
+
+The i.MX31 PDK contains a RedBoot bootloader in flash, which can be used to
+boot the newly created Buildroot images from the network.
+
+This necessitates to setup a TFTP server first. This setup is explained for
+example in Freescale i.MX31 PDK 1.5 Linux User's Guide [4].
+
+Here is a sample RedBoot configuration, for proper network boot of Buildroot on
+the i.MX31 PDK:
+
+    RedBoot> fconfig -l
+    Run script at boot: true
+    Boot script:
+    .. load -r -b 0x100000 zImage
+    .. exec -c "console=ttymxc0,115200"
+
+    Boot script timeout (1000ms resolution): 2
+    Use BOOTP for network configuration: false
+    Gateway IP address: <your gateway IP address>
+    Local IP address: <your PDK IP address>
+    Local IP address mask: 255.255.255.0
+    Default server IP address: <your TFTP server IP address>
+    Board specifics: 0
+    Console baud rate: 115200
+    Set eth0 network hardware address [MAC]: false
+    GDB connection port: 9000
+    Force console for special debug messages: false
+    Network debug at boot time: false
+
+Adapt those settings to your network configuration by replacing the appropriate
+network addresses where necessary.
+
+You might want to verify that your i.MX31 PDK switches settings are the correct
+ones for UART, power, boot mode, etc. Here is a reference switches
+configuration:
+
+    SW4
+    1   2   3   4   5   6   7  8
+    ON off off off off off off ON
+
+    SW5 SW6 SW7 SW8 SW9 SW10
+     0   1   0   0   0    0
+
+See the i.MX31 PDK Linux Quick Start Guide [5] for more details on the switches
+settings.
+
+Connect a serial terminal set to 115200n8 and power on the i.MX31 PDK board.
+Buildroot will present a login prompt on the serial port.
+
+Enjoy!
+
+References
+==========
+
+[1] http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX31PDK
+[2] http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX31
+[3] http://cache.freescale.com/files/32bit/doc/user_guide/pdk15_imx31_Hardware_UG.pdf
+[4] http://cache.freescale.com/files/32bit/doc/support_info/IMX31_PDK15_LINUXDOCS_BUNDLE.zip, pdk15_imx31__Linux_UG.pdf
+[5] http://www.freescale.com/files/32bit/doc/quick_ref_guide/PDK14LINUXQUICKSTART.pdf
diff --git a/configs/freescale_imx31_3stack_defconfig b/configs/freescale_imx31_3stack_defconfig
new file mode 100644
index 0000000..68781eb
--- /dev/null
+++ b/configs/freescale_imx31_3stack_defconfig
@@ -0,0 +1,22 @@
+# architecture
+BR2_arm=y
+BR2_arm1136jf_s_r0=y
+BR2_ARM_EABIHF=y
+
+# toolchain
+BR2_KERNEL_HEADERS_VERSION=y
+# Note: sadly the Linux kernel will not boot on the i.MX31 PDK, starting with
+# v3.16 and at least up to v4.0-rc4; this is why we use v3.15.y here.
+BR2_DEFAULT_KERNEL_VERSION="3.15.10"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_15=y
+
+# system
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+
+# kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_SAME_AS_HEADERS=y
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
+BR2_LINUX_KERNEL_ZIMAGE=y
+BR2_TARGET_ROOTFS_CPIO_GZIP=y
+BR2_TARGET_ROOTFS_INITRAMFS=y