[Buildroot] [PATCH 01/18] toolchain-external: move wrapper to toolchain directory

Romain Naour romain.naour at openwide.fr
Sat Oct 3 18:45:59 UTC 2015


Hi Arnout,

Le 20/09/2015 20:41, Arnout Vandecappelle (Essensium/Mind) a écrit :
> The toolchain wrapper will be reused for the internal toolchain, so it
> belongs in the toolchain directory. Also, the ext- prefix is removed
> from it. The build commands are moved to a new toolchain-wrapper.mk.
> 
> The wrapper arguments that are also relevant for the internal toolchain
> wrapper are moved to toolchain-wrapper.mk, the rest stays in
> toolchain-external.mk.
> 
> While we're at it, move the building of the toolchain wrapper to the
> build step of toolchain-external. There is no specific reason to do
> this, other than that it fits better semantically. Also remove the
> MESSAGE call, otherwise we'd see:
>>>> toolchain-external undefined Building
>>>> toolchain-external undefined Building toolchain wrapper
> /usr/bin/gcc ...
> Having an extra "Building toolchain wrapper' message is pointless.
> 
> The useless condition on $(BR2_TARGET_OPTIMIZATION) is removed. It was
> always true because it wasn't qstrip'ped first, so clearly it works
> without that condition as well.
> 
> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
> Cc: Fabio Porcedda <fabio.porcedda at gmail.com>
> Cc: Jérôme Oufella <jerome.oufella at savoirfairelinux.com>
> ---
>  toolchain/toolchain-external/toolchain-external.mk | 55 +++++++---------------
>  ...ext-toolchain-wrapper.c => toolchain-wrapper.c} |  0

Maybe you have to change some comments in the source file that refer to the
external toolchain wrapper.

Otherwise, this patch is ok.

Reviewed-by: Romain Naour <romain.naour at openwide.fr>

Best regards,
Romain

>  toolchain/toolchain-wrapper.mk                     | 27 +++++++++++
>  3 files changed, 45 insertions(+), 37 deletions(-)
>  rename toolchain/{toolchain-external/ext-toolchain-wrapper.c => toolchain-wrapper.c} (100%)
>  create mode 100644 toolchain/toolchain-wrapper.mk
> 
> diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> index 61a5dba..d60d116 100644
> --- a/toolchain/toolchain-external/toolchain-external.mk
> +++ b/toolchain/toolchain-external/toolchain-external.mk
> @@ -153,15 +153,14 @@ TOOLCHAIN_EXTERNAL_CROSS = $(TOOLCHAIN_EXTERNAL_BIN)/$(TOOLCHAIN_EXTERNAL_PREFIX
>  TOOLCHAIN_EXTERNAL_CC = $(TOOLCHAIN_EXTERNAL_CROSS)gcc
>  TOOLCHAIN_EXTERNAL_CXX = $(TOOLCHAIN_EXTERNAL_CROSS)g++
>  TOOLCHAIN_EXTERNAL_READELF = $(TOOLCHAIN_EXTERNAL_CROSS)readelf
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS = -DBR_SYSROOT='"$(STAGING_SUBDIR)"'
>  
>  ifeq ($(filter $(HOST_DIR)/%,$(TOOLCHAIN_EXTERNAL_BIN)),)
>  # TOOLCHAIN_EXTERNAL_BIN points outside HOST_DIR => absolute path
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += \
> +TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += \
>  	-DBR_CROSS_PATH_ABS='"$(TOOLCHAIN_EXTERNAL_BIN)"'
>  else
>  # TOOLCHAIN_EXTERNAL_BIN points inside HOST_DIR => relative path
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += \
> +TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += \
>  	-DBR_CROSS_PATH_REL='"$(TOOLCHAIN_EXTERNAL_BIN:$(HOST_DIR)/%=%)"'
>  endif
>  
> @@ -180,59 +179,54 @@ CC_TARGET_MODE_ := $(call qstrip,$(BR2_GCC_TARGET_MODE))
>  # to select the right multilib variant
>  ifeq ($(BR2_x86_64),y)
>  TOOLCHAIN_EXTERNAL_CFLAGS += -m64
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_64
> +TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_64
>  endif
>  ifneq ($(CC_TARGET_ARCH_),)
>  TOOLCHAIN_EXTERNAL_CFLAGS += -march=$(CC_TARGET_ARCH_)
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ARCH='"$(CC_TARGET_ARCH_)"'
> +TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ARCH='"$(CC_TARGET_ARCH_)"'
>  endif
>  ifneq ($(CC_TARGET_CPU_),)
>  TOOLCHAIN_EXTERNAL_CFLAGS += -mcpu=$(CC_TARGET_CPU_)
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_CPU='"$(CC_TARGET_CPU_)"'
> +TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_CPU='"$(CC_TARGET_CPU_)"'
>  endif
>  ifneq ($(CC_TARGET_ABI_),)
>  TOOLCHAIN_EXTERNAL_CFLAGS += -mabi=$(CC_TARGET_ABI_)
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ABI='"$(CC_TARGET_ABI_)"'
> +TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ABI='"$(CC_TARGET_ABI_)"'
>  endif
>  ifneq ($(CC_TARGET_FPU_),)
>  TOOLCHAIN_EXTERNAL_CFLAGS += -mfpu=$(CC_TARGET_FPU_)
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_FPU='"$(CC_TARGET_FPU_)"'
> +TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_FPU='"$(CC_TARGET_FPU_)"'
>  endif
>  ifneq ($(CC_TARGET_FLOAT_ABI_),)
>  TOOLCHAIN_EXTERNAL_CFLAGS += -mfloat-abi=$(CC_TARGET_FLOAT_ABI_)
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_FLOAT_ABI='"$(CC_TARGET_FLOAT_ABI_)"'
> +TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_FLOAT_ABI='"$(CC_TARGET_FLOAT_ABI_)"'
>  endif
>  ifneq ($(CC_TARGET_MODE_),)
>  TOOLCHAIN_EXTERNAL_CFLAGS += -m$(CC_TARGET_MODE_)
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_MODE='"$(CC_TARGET_MODE_)"'
> +TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MODE='"$(CC_TARGET_MODE_)"'
>  endif
>  ifeq ($(BR2_BINFMT_FLAT),y)
>  TOOLCHAIN_EXTERNAL_CFLAGS += -Wl,-elf2flt
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_BINFMT_FLAT
> +TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_BINFMT_FLAT
>  endif
>  ifeq ($(BR2_mipsel)$(BR2_mips64el),y)
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_MIPS_TARGET_LITTLE_ENDIAN
> +TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MIPS_TARGET_LITTLE_ENDIAN
>  TOOLCHAIN_EXTERNAL_CFLAGS += -EL
>  endif
>  ifeq ($(BR2_mips)$(BR2_mips64),y)
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_MIPS_TARGET_BIG_ENDIAN
> +TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MIPS_TARGET_BIG_ENDIAN
>  TOOLCHAIN_EXTERNAL_CFLAGS += -EB
>  endif
>  ifeq ($(BR2_arceb),y)
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ARC_TARGET_BIG_ENDIAN
> +TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ARC_TARGET_BIG_ENDIAN
>  TOOLCHAIN_EXTERNAL_CFLAGS += -EB
>  endif
> -ifneq ($(BR2_TARGET_OPTIMIZATION),)
> +
>  TOOLCHAIN_EXTERNAL_CFLAGS += $(call qstrip,$(BR2_TARGET_OPTIMIZATION))
> -# We create a list like '"-mfoo", "-mbar", "-mbarfoo"' so that each
> -# flag is a separate argument when used in execv() by the external
> -# toolchain wrapper.
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ADDITIONAL_CFLAGS='$(foreach f,$(call qstrip,$(BR2_TARGET_OPTIMIZATION)),"$(f)",)'
> -endif
>  
>  ifeq ($(BR2_SOFT_FLOAT),y)
>  TOOLCHAIN_EXTERNAL_CFLAGS += -msoft-float
> -TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_SOFTFLOAT=1
> +TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_SOFTFLOAT=1
>  endif
>  
>  # The Linaro ARMhf toolchain expects the libraries in
> @@ -686,15 +680,6 @@ define TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT
>  endef
>  endif
>  
> -# We use --hash-style=both to increase the compatibility of
> -# the generated binary with older platforms, except for MIPS,
> -# where the only acceptable hash style is 'sysv'
> -ifeq ($(findstring mips,$(HOSTARCH)),mips)
> -TOOLCHAIN_EXTERNAL_WRAPPER_HASH_STYLE = sysv
> -else
> -TOOLCHAIN_EXTERNAL_WRAPPER_HASH_STYLE = both
> -endif
> -
>  # Build toolchain wrapper for preprocessor, C and C++ compiler and setup
>  # symlinks for everything else. Skip gdb symlink when we are building our
>  # own gdb to prevent two gdb's in output/host/usr/bin.
> @@ -705,8 +690,6 @@ endif
>  # match the *cc-* pattern. Therefore, an additional case is added for *-ar,
>  # *-ranlib and *-nm.
>  define TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER
> -	$(Q)$(call MESSAGE,"Building ext-toolchain wrapper")
> -	$(Q)mkdir -p $(HOST_DIR)/usr/bin
>  	$(Q)cd $(HOST_DIR)/usr/bin; \
>  	for i in $(TOOLCHAIN_EXTERNAL_CROSS)*; do \
>  		base=$${i##*/}; \
> @@ -715,7 +698,7 @@ define TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER
>  			ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \
>  			;; \
>  		*cc|*cc-*|*++|*++-*|*cpp) \
> -			ln -sf ext-toolchain-wrapper $$base; \
> +			ln -sf toolchain-wrapper $$base; \
>  			;; \
>  		*gdb|*gdbtui) \
>  			if test "$(BR2_PACKAGE_HOST_GDB)" != "y"; then \
> @@ -727,10 +710,6 @@ define TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER
>  			;; \
>  		esac; \
>  	done
> -	$(HOSTCC) $(HOST_CFLAGS) $(TOOLCHAIN_EXTERNAL_WRAPPER_ARGS) \
> -		-s -Wl,--hash-style=$(TOOLCHAIN_EXTERNAL_WRAPPER_HASH_STYLE) \
> -		toolchain/toolchain-external/ext-toolchain-wrapper.c \
> -		-o $(HOST_DIR)/usr/bin/ext-toolchain-wrapper
>  endef
>  
>  # This sed magic is taken from Linux headers_install.sh script.
> @@ -769,6 +748,8 @@ define TOOLCHAIN_EXTERNAL_FIXUP_UCLIBCNG_LDSO
>  	fi
>  endef
>  
> +TOOLCHAIN_EXTERNAL_BUILD_CMDS = $(TOOLCHAIN_BUILD_WRAPPER)
> +
>  define TOOLCHAIN_EXTERNAL_INSTALL_STAGING_CMDS
>  	$(TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS)
>  	$(TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER)
> diff --git a/toolchain/toolchain-external/ext-toolchain-wrapper.c b/toolchain/toolchain-wrapper.c
> similarity index 100%
> rename from toolchain/toolchain-external/ext-toolchain-wrapper.c
> rename to toolchain/toolchain-wrapper.c
> diff --git a/toolchain/toolchain-wrapper.mk b/toolchain/toolchain-wrapper.mk
> new file mode 100644
> index 0000000..8e8a445
> --- /dev/null
> +++ b/toolchain/toolchain-wrapper.mk
> @@ -0,0 +1,27 @@
> +# This file contains the definition of the toolchain wrapper build commands
> +
> +# We use --hash-style=both to increase the compatibility of
> +# the generated binary with older platforms, except for MIPS,
> +# where the only acceptable hash style is 'sysv'
> +ifeq ($(findstring mips,$(HOSTARCH)),mips)
> +TOOLCHAIN_WRAPPER_HASH_STYLE = sysv
> +else
> +TOOLCHAIN_WRAPPER_HASH_STYLE = both
> +endif
> +
> +TOOLCHAIN_WRAPPER_ARGS = $($(PKG)_TOOLCHAIN_WRAPPER_ARGS)
> +TOOLCHAIN_WRAPPER_ARGS += -DBR_SYSROOT='"$(STAGING_SUBDIR)"'
> +
> +# We create a list like '"-mfoo", "-mbar", "-mbarfoo"' so that each
> +# flag is a separate argument when used in execv() by the external
> +# toolchain wrapper.
> +TOOLCHAIN_WRAPPER_ARGS += -DBR_ADDITIONAL_CFLAGS='$(foreach f,$(call qstrip,$(BR2_TARGET_OPTIMIZATION)),"$(f)",)'
> +
> +# For simplicity, build directly into the install location
> +define TOOLCHAIN_BUILD_WRAPPER
> +	$(Q)mkdir -p $(HOST_DIR)/usr/bin
> +	$(HOSTCC) $(HOST_CFLAGS) $(TOOLCHAIN_WRAPPER_ARGS) \
> +		-s -Wl,--hash-style=$(TOOLCHAIN_WRAPPER_HASH_STYLE) \
> +		toolchain/toolchain-wrapper.c \
> +		-o $(HOST_DIR)/usr/bin/toolchain-wrapper
> +endef
> 



More information about the buildroot mailing list