[Buildroot] [PATCH v2] board: add support for Synopsys VDK Software Development Platform

[Thomas Petazzoni]

Joao,

On Wed, 30 Sep 2015 14:45:48 +0100, Joao Pinto wrote:
> The Virtualizer Development Kit (VDK) Family for ARM Cortex Products 
> consists of a set of virtual prototypes that provide a virtualizer 
> for the ARM core variants. The VDK is a standalone package that runs
> on an host computer.
> 
> Remark: The ext2 generator is essential since it is the expected 
> filesystem format expected by the VDK platform.
> 
> Signed-off-by: Joao Pinto <jpinto at synopsys.com>

This looks good, but there are still a few issues.

> diff --git a/board/synopsys/vdk/fs-overlay/etc/inittab b/board/synopsys/vdk/fs-overlay/etc/inittab
> new file mode 100644
> index 0000000..9cd272f
> --- /dev/null
> +++ b/board/synopsys/vdk/fs-overlay/etc/inittab
> @@ -0,0 +1,36 @@
> +# /etc/inittab
> +#
> +# Copyright (C) 2001 Erik Andersen <andersen at codepoet.org>
> +#
> +# Note: BusyBox init doesn't support runlevels.  The runlevels field is
> +# completely ignored by BusyBox init. If you want runlevels, use
> +# sysvinit.
> +#
> +# Format for each entry: <id>:<runlevels>:<action>:<process>
> +#
> +# id        == tty to run on, or empty for /dev/console
> +# runlevels == ignored
> +# action    == one of sysinit, respawn, askfirst, wait, and once
> +# process   == program to run
> +
> +# Startup the system
> +null::sysinit:/bin/mount -t proc proc /proc
> +null::sysinit:/bin/mount -o remount,rw /
> +null::sysinit:/bin/mkdir -p /dev/pts
> +null::sysinit:/bin/mkdir -p /dev/shm
> +null::sysinit:/bin/mount -a
> +null::sysinit:/bin/hostname -F /etc/hostname
> +# now run any rc scripts
> +::sysinit:/etc/init.d/rcS
> +
> +# Put a getty on the serial port
> +console::respawn:/sbin/getty -L  console 0 vt100 # GENERIC_SERIAL
> +tty1::respawn:/sbin/getty 0 tty1

Like Arnout said, do we really need to have two gettys?

> diff --git a/board/synopsys/vdk/linux-vdk-defconfig b/board/synopsys/vdk/linux-vdk-defconfig
> new file mode 100644
> index 0000000..e3eb277
> --- /dev/null
> +++ b/board/synopsys/vdk/linux-vdk-defconfig
> @@ -0,0 +1,817 @@
> +CONFIG_ARM64=y
> +CONFIG_64BIT=y
> +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y

[... snip ...]

This is clearly not a kernel defconfig. It looks like you have just
removed the commented lines, which is not correct. Can you please
generate it with "make linux-update-defconfig" ?

See
http://free-electrons.com/doc/training/buildroot/buildroot-slides.pdf,
slide 78 for details on how to do that.


> diff --git a/configs/snps_vdk_defconfig b/configs/snps_vdk_defconfig
> new file mode 100644
> index 0000000..39eb86f
> --- /dev/null
> +++ b/configs/snps_vdk_defconfig

This file should be named snps_aarch64_vdk_defconfig

The VDK exists for other architectures than AArch64: we also have
defconfigs for the VDK emulated the ARC HS38 CPU, so we need a way to
distinguish that.

> @@ -0,0 +1,16 @@
> +BR2_aarch64=y
> +BR2_KERNEL_HEADERS_3_18=y
> +BR2_TARGET_GENERIC_HOSTNAME="vdk-buildroot"
> +BR2_TARGET_GENERIC_ISSUE="Welcome to SNPS VDK by Buildroot"
> +BR2_ROOTFS_OVERLAY="board/synopsys/vdk/fs-overlay"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
> +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://git.linaro.org/kernel/linux-linaro-tracking.git"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="linux-linaro-3.18-2014.12"
> +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
> +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/synopsys/vdk/linux-vdk-defconfig"

Same here, vdk-aarch64 or something like that.


> +BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
> +BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
> +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
> +BR2_PACKAGE_BASH=y

No bash please.

> +BR2_TARGET_ROOTFS_EXT2=y

If you need ext2, then please disable the tarball.

I'll mark your patch as Changes Requested in our patch tracking system,
so please resubmit a new version that fixes the above comments,
otherwise we'll forget about your contribution.

Thanks!

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com