[Buildroot] [PATCH] sane-backends: add systemd support
Vicente Olivert Riera
Vincent.Riera at imgtec.com
Tue Oct 6 16:53:52 UTC 2015
The content and the location of the saned.socket and saned at .service
files is based on the instructions of the sane-backends manual.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera at imgtec.com>
---
Notes to the maintainer:
- This patch is meant to be applied after:
http://patchwork.ozlabs.org/patch/526815/
package/sane-backends/sane-backends.mk | 14 ++++++++++++++
package/sane-backends/saned.socket | 10 ++++++++++
package/sane-backends/saned at .service | 18 ++++++++++++++++++
3 files changed, 42 insertions(+), 0 deletions(-)
create mode 100644 package/sane-backends/saned.socket
create mode 100644 package/sane-backends/saned at .service
diff --git a/package/sane-backends/sane-backends.mk b/package/sane-backends/sane-backends.mk
index 0c0b5a9..82b5052 100644
--- a/package/sane-backends/sane-backends.mk
+++ b/package/sane-backends/sane-backends.mk
@@ -14,6 +14,13 @@ SANE_BACKENDS_INSTALL_STAGING = YES
SANE_BACKENDS_CONF_OPTS = \
$(if $(BR2_TOOLCHAIN_HAS_THREADS),--enable-pthread,--disable-pthread)
+ifeq ($(BR2_INIT_SYSTEMD),y)
+SANE_BACKENDS_CONF_OPTS += --with-systemd
+SANE_BACKENDS_DEPENDENCIES += systemd
+else
+SANE_BACKENDS_CONF_OPTS += --without-systemd
+endif
+
ifeq ($(BR2_PACKAGE_LIBUSB),y)
SANE_BACKENDS_DEPENDENCIES += libusb
SANE_BACKENDS_CONF_OPTS += --enable-libusb_1_0
@@ -50,4 +57,11 @@ endef
SANE_BACKENDS_POST_CONFIGURE_HOOKS += SANE_BACKENDS_DISABLE_DOCS
+define SANE_BACKENDS_INSTALL_INIT_SYSTEMD
+ $(INSTALL) -m 0644 -D package/sane-backends/saned.socket \
+ $(TARGET_DIR)/etc/systemd/system/saned.socket
+ $(INSTALL) -m 0644 -D package/sane-backends/saned at .service \
+ $(TARGET_DIR)/etc/systemd/system/saned at .service
+endef
+
$(eval $(autotools-package))
diff --git a/package/sane-backends/saned.socket b/package/sane-backends/saned.socket
new file mode 100644
index 0000000..1aa19e7
--- /dev/null
+++ b/package/sane-backends/saned.socket
@@ -0,0 +1,10 @@
+[Unit]
+Description=saned incoming socket
+
+[Socket]
+ListenStream=6566
+Accept=yes
+MaxConnections=1
+
+[Install]
+WantedBy=sockets.target
diff --git a/package/sane-backends/saned at .service b/package/sane-backends/saned at .service
new file mode 100644
index 0000000..1905dbf
--- /dev/null
+++ b/package/sane-backends/saned at .service
@@ -0,0 +1,18 @@
+[Unit]
+Description=Scanner Service
+Requires=saned.socket
+
+[Service]
+ExecStart=/usr/sbin/saned
+User=saned
+Group=saned
+StandardInput=null
+StandardOutput=syslog
+StandardError=syslog
+Environment=SANE_CONFIG_DIR=/etc/sane.d
+# If you need to debug your configuration uncomment the next line and
+# change it as appropriate to set the desired debug options
+# Environment=SANE_DEBUG_DLL=255 SANE_DEBUG_BJNP=5
+
+[Install]
+Also=saned.socket
--
1.7.1
More information about the buildroot
mailing list