[Buildroot] [PATCH v2 1/1] package/mesa3d: Fix dri checks

[Peter Seiderer]

Hello Bernd,

On Sat, 26 Sep 2015 12:32:43 +0200, Bernd Kuhls <bernd.kuhls at t-online.de> wrote:

> "MESA3D_EGL_PLATFORMS = drm" is only needed when dri drivers are
> enabled:
> http://cgit.freedesktop.org/mesa/mesa/tree/configure.ac?h=10.6#n1653
> 
> Unconditionally enable dri support, also for gallium drivers, quoting
> http://cgit.freedesktop.org/mesa/mesa/tree/configure.ac?h=10.6#n1382
> 
>  # Strictly speaking libgbm does not require --enable-dri, although
>  # both of its backends do. Thus one can build libgbm without any
>  # backends if --disable-dri is set.
>  # To avoid unnecessary complexity of checking if at least one backend
>  # is available when building, just mandate --enable-dri.
>    AC_MSG_ERROR([gbm requires --enable-dri])
> 
> Fixes
> http://autobuild.buildroot.net/results/799/799f505594f668154af38cb2c2a1ed8a90337e9f/
> http://autobuild.buildroot.net/results/d00/d00fe349e8710a1ad557507cf04b006216806868/
> http://autobuild.buildroot.net/results/c7b/c7ba08c8cf54b2e7cf28c5e3454e92a408e724db/
> http://autobuild.buildroot.net/results/cd7/cd717c9a3a1b0080192e7e765d990cce55513005/
> 
> Signed-off-by: Bernd Kuhls <bernd.kuhls at t-online.de>
> ---
> v2: Shortened too long lines in commit message (Vicente)
> 
>  package/mesa3d/mesa3d.mk | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk
> index 0244523..c5f4c82 100644
> --- a/package/mesa3d/mesa3d.mk
> +++ b/package/mesa3d/mesa3d.mk
> @@ -88,7 +88,7 @@ endef
>  
>  ifeq ($(BR2_PACKAGE_MESA3D_DRI_DRIVER),)
>  MESA3D_CONF_OPTS += \
> -	--without-dri-drivers --disable-dri --disable-dri3
> +	--without-dri-drivers --disable-dri3
>  MESA3D_POST_INSTALL_STAGING_HOOKS += MESA3D_REMOVE_OPENGL_PC
>  else
>  ifeq ($(BR2_PACKAGE_XPROTO_DRI3PROTO),y)
> @@ -102,7 +102,6 @@ MESA3D_DEPENDENCIES += xlib_libXxf86vm
>  endif
>  MESA3D_PROVIDES += libgl
>  MESA3D_CONF_OPTS += \
> -	--enable-dri \
>  	--enable-shared-glapi \
>  	--enable-driglx-direct \
>  	--with-dri-drivers=$(subst $(space),$(comma),$(MESA3D_DRI_DRIVERS-y))
> @@ -114,7 +113,7 @@ endif
>  #   - it is needed for GLES (mesa3d's ./configure is a bit weird)
>  #   - but if no DRI driver is enabled, then libgl is not built,
>  #     remove dri.pc and gl.pc in this case (MESA3D_REMOVE_OPENGL_PC)
> -MESA3D_CONF_OPTS += --enable-opengl
> +MESA3D_CONF_OPTS += --enable-opengl --enable-dri
>  
>  # libva and mesa3d have a circular dependency
>  # we do not need libva support in mesa3d, therefore disable this option
> @@ -122,7 +121,9 @@ MESA3D_CONF_OPTS += --disable-va
>  
>  ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_EGL),y)
>  MESA3D_PROVIDES += libegl
> +ifeq ($(BR2_PACKAGE_MESA3D_DRI_DRIVER),y)
>  MESA3D_EGL_PLATFORMS = drm
> +endif
>  ifeq ($(BR2_PACKAGE_WAYLAND),y)
>  MESA3D_DEPENDENCIES += wayland
>  MESA3D_EGL_PLATFORMS += wayland

Fixes compile failure from http://autobuild.buildroot.net/results/f06/f068a90d89a3ef820c9e43cc30dee2b9d6476d8e/

Tested-by: Peter Seiderer <ps.report at gmx.net>

Regards,
Peter