[Buildroot] Right board to use -- buildroot begniers

[Dinesh Guleria]

Thanks for the info.

Regards,
Dinesh
On 8 Sep 2015 21:46, "Luca Ceresoli" <luca at lucaceresoli.net> wrote:

> Dear Dinesh,
>
> Dinesh Guleria wrote:
>
>> So i will go for atmel_sama5d3_xplained .
>>
>> http://www.element14.com/community/docs/DOC-38394/l/evaluation-kit-for-at91sam9g45
>>
>>  >> I have no idea, but it is fully supported by Buildroot, both for
>> booting from
>> SD card and booting from flash.
>>
>> With seggers j- link can i flash uboot to the Nand flash of this board ?
>>
>
> To flash the bootloader on the sama5d3_xplained board you don't need
> any JTAG interface. You just need to remove the NAND CS jumper on the
> board and connect on UART with the sam-ba tool.
>
> The labs from the Free Electrons training material have detailed
> information on how to do that:
> http://free-electrons.com/doc/training/embedded-linux/
>
> --
> Luca
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20150908/58099dcd/attachment-0002.html>