[Buildroot] [PATCH v3] board: Add support for Acmesystems Arietta g25

Angelo Compagnucci angelo.compagnucci at gmail.com
Thu Feb 11 08:48:12 UTC 2016


Dear Thomas Petazzoni, Peter Korsgaard,

No way to have it included at this point in time, right?

I rally wanted to have it included for 2016.02 release!

Sincerely, Angelo

2016-02-05 19:08 GMT+01:00 Angelo Compagnucci <angelo.compagnucci at gmail.com>:
> This patch adds a minimal working configuration for
> Acmesystems Arietta g25.
>
> Signed-off-by: Angelo Compagnucci <angelo.compagnucci at gmail.com>
> ---
> Changelog:
> v3 -> v3:
>
> * Fixing missing DOSFSTOOLS, MTOOLS
> * Rewording of readme.txt
>
> v1 -> v2:
>
> * Using genimage for image generation, updating documentation
>   accordingly.
>
>  board/acmesystems/arietta-g25/genimage.cfg      | 35 +++++++++++++++++++
>  board/acmesystems/arietta-g25/post-image.sh     | 16 +++++++++
>  board/acmesystems/arietta-g25/readme.txt        | 45 +++++++++++++++++++++++++
>  configs/acmesystems_arietta_g25_128mb_defconfig | 33 ++++++++++++++++++
>  configs/acmesystems_arietta_g25_256mb_defconfig | 33 ++++++++++++++++++
>  5 files changed, 162 insertions(+)
>  create mode 100644 board/acmesystems/arietta-g25/genimage.cfg
>  create mode 100755 board/acmesystems/arietta-g25/post-image.sh
>  create mode 100644 board/acmesystems/arietta-g25/readme.txt
>  create mode 100644 configs/acmesystems_arietta_g25_128mb_defconfig
>  create mode 100644 configs/acmesystems_arietta_g25_256mb_defconfig
>
> diff --git a/board/acmesystems/arietta-g25/genimage.cfg b/board/acmesystems/arietta-g25/genimage.cfg
> new file mode 100644
> index 0000000..d69d403
> --- /dev/null
> +++ b/board/acmesystems/arietta-g25/genimage.cfg
> @@ -0,0 +1,35 @@
> +# Minimal SD card image for the Acmesystems Arietta G25
> +#
> +image boot.vfat {
> +       vfat {
> +               file zImage {
> +                       image = "zImage"
> +               }
> +
> +               file acme-arietta.dtb {
> +                       image = "at91-ariag25.dtb"
> +               }
> +
> +               file boot.bin{
> +                       image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.7.bin"
> +               }
> +       }
> +       size = 16M
> +}
> +
> +image sdcard.img {
> +       hdimage {
> +       }
> +
> +       partition boot {
> +               partition-type = 0xC
> +               bootable = "true"
> +               image = "boot.vfat"
> +       }
> +
> +       partition rootfs {
> +               partition-type = 0x83
> +               image = "rootfs.ext4"
> +               size = 512M
> +       }
> +}
> diff --git a/board/acmesystems/arietta-g25/post-image.sh b/board/acmesystems/arietta-g25/post-image.sh
> new file mode 100755
> index 0000000..c82b189
> --- /dev/null
> +++ b/board/acmesystems/arietta-g25/post-image.sh
> @@ -0,0 +1,16 @@
> +#!/bin/sh
> +
> +BOARD_DIR="$(dirname $0)"
> +GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
> +GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> +
> +rm -rf "${GENIMAGE_TMP}"
> +
> +genimage                               \
> +       --rootpath "${TARGET_DIR}"     \
> +       --tmppath "${GENIMAGE_TMP}"    \
> +       --inputpath "${BINARIES_DIR}"  \
> +       --outputpath "${BINARIES_DIR}" \
> +       --config "${GENIMAGE_CFG}"
> +
> +exit $?
> diff --git a/board/acmesystems/arietta-g25/readme.txt b/board/acmesystems/arietta-g25/readme.txt
> new file mode 100644
> index 0000000..3680b95
> --- /dev/null
> +++ b/board/acmesystems/arietta-g25/readme.txt
> @@ -0,0 +1,45 @@
> +Acmesystems Arietta G25
> +
> +Intro
> +=====
> +
> +This default configuration will allow you to start experimenting with the
> +buildroot environment for the Arietta G25. With the current configuration
> +it will bring-up the board, and allow access through the serial console.
> +
> +You can find additional informations, tutorials and a very comprehensive
> +documentation on http://www.acmesystems.it/arietta.
> +
> +Build instructions
> +==================
> +
> +To build an image for the arietta g25 choose the configuration
> +corresponding to the arietta variant.
> +
> +For 128MB RAM variant type:
> +
> +$ make acmesystems_arietta_g25_128mb_defconfig
> +
> +else for 256MB RAM variant type:
> +
> +$ make acmesystems_arietta_g25_256mb_defconfig
> +
> +then:
> +
> +$ make
> +
> +How to write the microSD card
> +=============================
> +
> +Once the build process is finished you will have an image called "sdcard.img"
> +in the output/images/ directory.
> +
> +Copy the bootable "sdcard.img" onto an SD card with "dd":
> +
> +  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
> +
> +Insert the microSD card into the arietta slot and power it.
> +
> +The image just built is fairly basic and the only output
> +you will get is on serial console, please consider to use a DPI
> +cable (http://www.acmesystems.it/DPI)
> diff --git a/configs/acmesystems_arietta_g25_128mb_defconfig b/configs/acmesystems_arietta_g25_128mb_defconfig
> new file mode 100644
> index 0000000..e7f1dee
> --- /dev/null
> +++ b/configs/acmesystems_arietta_g25_128mb_defconfig
> @@ -0,0 +1,33 @@
> +# Architecture
> +BR2_arm=y
> +
> +# Toolchain
> +BR2_KERNEL_HEADERS_VERSION=y
> +BR2_DEFAULT_KERNEL_VERSION="4.1.1"
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
> +
> +# Kernel
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1"
> +BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
> +BR2_LINUX_KERNEL_ZIMAGE=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
> +BR2_LINUX_KERNEL_XZ=y
> +
> +# Bootloader
> +BR2_TARGET_AT91BOOTSTRAP3=y
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="git://github.com/tanzilli/at91bootstrap.git"
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="cedbde4b36695b715f469f4872f47e5cc8115000"
> +BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-128m"
> +
> +# Image
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +# BR2_TARGET_ROOTFS_TAR is not set
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> diff --git a/configs/acmesystems_arietta_g25_256mb_defconfig b/configs/acmesystems_arietta_g25_256mb_defconfig
> new file mode 100644
> index 0000000..8c39001
> --- /dev/null
> +++ b/configs/acmesystems_arietta_g25_256mb_defconfig
> @@ -0,0 +1,33 @@
> +# Architecture
> +BR2_arm=y
> +
> +# Toolchain
> +BR2_KERNEL_HEADERS_VERSION=y
> +BR2_DEFAULT_KERNEL_VERSION="4.1.1"
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
> +
> +# Kernel
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1"
> +BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
> +BR2_LINUX_KERNEL_ZIMAGE=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
> +BR2_LINUX_KERNEL_XZ=y
> +
> +# Bootloader
> +BR2_TARGET_AT91BOOTSTRAP3=y
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="git://github.com/tanzilli/at91bootstrap.git"
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="cedbde4b36695b715f469f4872f47e5cc8115000"
> +BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-256m"
> +
> +# Image
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +# BR2_TARGET_ROOTFS_TAR is not set
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> --
> 1.9.1
>



-- 
Profile: http://it.linkedin.com/in/compagnucciangelo



More information about the buildroot mailing list