[Buildroot] [PATCH] board: add support for Freescale i.MX6UL Evaluation Kit

[Thomas Petazzoni]

Julien,

Thanks for this contribution!

On Wed, 20 Jan 2016 15:30:20 +0100, julien.boibessot at free.fr wrote:

> diff --git a/board/freescale/imx6ulevk/create-boot-sd.sh b/board/freescale/imx6ulevk/create-boot-sd.sh
> new file mode 100755
> index 0000000..b3c47ae
> --- /dev/null
> +++ b/board/freescale/imx6ulevk/create-boot-sd.sh

Could you instead use genimage rather than providing a script to create
the SD card contents ?

You can look at the following examples:

board/cubietech/cubieboard2/genimage.cfg
board/via/imx6_vab820/genimage.cfg
board/intel/galileo/genimage.cfg
board/raspberrypi/genimage-raspberrypi.cfg
board/raspberrypi/genimage-raspberrypi2.cfg
board/orangepi/orangepipc/genimage.cfg
board/wandboard/genimage.cfg

The wandboard one should be particularly useful, since it's also an i.MX6 board.


> diff --git a/configs/freescale_imx6ulevk_defconfig b/configs/freescale_imx6ulevk_defconfig
> new file mode 100644
> index 0000000..7ba5e7b
> --- /dev/null
> +++ b/configs/freescale_imx6ulevk_defconfig
> @@ -0,0 +1,31 @@
> +# architecture
> +BR2_arm=y
> +BR2_cortex_a7=y
> +BR2_ARM_EABI=y

Why ? Any reason to use EABI over EABIhf, which is now the default in
Buildroot for Cortex-A processors ?

> +BR2_ARM_FPU_NEON=y
> +
> +# toolchain
> +BR2_KERNEL_HEADERS_VERSION=y
> +BR2_DEFAULT_KERNEL_VERSION="3.14.28"
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y
> +
> +# system
> +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
> +
> +# kernel
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
> +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="imx_3.14.38_6ul_ga"
> +BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
> +BR2_LINUX_KERNEL_ZIMAGE=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ul-14x14-evk"
> +
> +# bootloader
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BOARDNAME="mx6ul_14x14_evk"
> +BR2_TARGET_UBOOT_CUSTOM_GIT=y
> +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
> +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="imx_v2015.04_3.14.38_6ul_ga"
> +BR2_TARGET_UBOOT_FORMAT_IMX=y

The rest looks good to me. Thanks a lot!

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com