[Buildroot] [PATCH] linux/tools: make it a real, separate package
Yann E. MORIN
yann.morin.1998 at free.fr
Fri Jul 8 20:23:50 UTC 2016
The kernel source tree also contains the sources for various userland
tools, of which cpupower, perf or selftests.
Currently, we have support for building those tools as part of the
kernel build procedure. This looked the correct hing to do so far,
because, well, they *are* part of the kernel source tree and some
really have to be the same version as the kernel that will run.
However, this is causing quite a non-trivial-to-break circular
dependency in some configurations. For example, this defconfig fails to
build (similar to the one reported by Paul):
BR2_arm=y
BR2_cortex_a7=y
BR2_ARM_FPU_NEON_VFPV4=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_SYSTEMD=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="26f3b72a9c049be10e6af196252283e1f6ab9d1f"
BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
BR2_PACKAGE_LINUX_TOOLS_CPUPOWER=y
BR2_PACKAGE_CRYPTODEV=y
BR2_PACKAGE_OPENSSL=y
BR2_PACKAGE_LIBCURL=y
This causes a circular dependency, as explained by Thomas:
- When libcurl is enabled, systemd depends on it
- When OpenSSL is enabled, obviously, libcurl will use it for SSL
support
- When cryptodev-linux is enabled, OpenSSL will depend on it to use
crypto accelerators supported in the kernel via cryptodev-linux.
- cryptodev-linux being a kernel module, it depends on linux
- linux by itself (the kernel) does not depend on pciutils, but the
linux tool "cpupower" (managed in linux-tool-cpupower) depends on
pciutils
- pciutils depends on udev when available
- udev is provided by systemd.
And indeed, during the build, we can see that make warns (it's only
reported as a *warning*, not as an actual error):
[...]
make[1]: Circular /home/ymorin/dev/buildroot/O/build/openssl-1.0.2h/.stamp_configured
<- cryptodev-linux dependency dropped.
>>> openssl 1.0.2h Downloading
[...]
So the build fails later on, when openssl is actually built:
eng_cryptodev.c:57:31: fatal error: crypto/cryptodev.h: No such file or directory
compilation terminated.
<builtin>: recipe for target 'eng_cryptodev.o' failed
Furthermore, graph-depends also detects the circular dependency, but
treats it as a hard-error:
Recursion detected for : cryptodev-linux
which is a dependency of: openssl
which is a dependency of: libcurl
which is a dependency of: systemd
which is a dependency of: udev
which is a dependency of: pciutils
which is a dependency of: linux
which is a dependency of: cryptodev-linux
Makefile:738: recipe for target 'graph-depends' failed
Of course, there is no way to break the loop without losing
functionality in either one of the involved packages *and* keep
our infrastructure and packages as-is.
The only solution is to break the loop at the linux-tools level, by
moving them away in their own package, so that the linux package will no
longer have the opportunity to depend on another package via a
dependency of one the tools.
All three linux tools are thus moved away to their own package.
The package infrastructure only knows of three types of packages: those
in package/ , those in boot/ and the one in linux/ . So we create that
new linux-tools package in package/ so that we don;t have to fiddle with
yet another special case in the infra. Still, we want its configure
options to appear in the kernel's sub-menu.
So, we make it a prompt-less package, with only the tools visible as
options of that package, but without the usual dependency on their
master symbol; they are only dependent on the Linux kernel.
Furthermore, because the kernel is such a huge pile of code, we would
not be very happy to extract it a second time just for the sake of a few
tools. We can't extract only the tools/ sub-directory from the kernel
source either, because some tools have hard-coded path to includes from
the kernel (arch and stuff).
Instead, we just symlink the linux build tree into our own build tree.
But we can't replace our build tree itself with a symlink to the
kernel's or the two would share the same stamp files, which is no-good,
no-no... So we just create the symlink in our build tree.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998 at free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Cc: Paul Ashford <paul.ashford at zurria.co.uk>
---
Note that the tools were ported over as-is to their new package:
post-build, post-target-install and post-staging-install hooks were used
previously, and we still use that with no actual _BUILD_CMDS. We could
very well have defined build and install commands for each tool and
shoehorned that into the _BUKLD_CMDS, but just portign the hooks over
was the easiest way forward. A later patch can provide more cleanup if
needed.
---
Config.in.legacy | 21 ++++++++
linux/Config.in | 2 +-
linux/linux.mk | 24 +--------
.../linux-tools/Config.in | 14 ++++--
.../linux-tools}/linux-tool-cpupower.mk | 8 +--
{linux => package/linux-tools}/linux-tool-perf.mk | 18 +++----
.../linux-tools}/linux-tool-selftests.mk | 14 +++---
package/linux-tools/linux-tools.mk | 58 ++++++++++++++++++++++
8 files changed, 112 insertions(+), 47 deletions(-)
rename linux/Config.tools.in => package/linux-tools/Config.in (81%)
rename {linux => package/linux-tools}/linux-tool-cpupower.mk (77%)
rename {linux => package/linux-tools}/linux-tool-perf.mk (85%)
rename {linux => package/linux-tools}/linux-tool-selftests.mk (65%)
create mode 100644 package/linux-tools/linux-tools.mk
diff --git a/Config.in.legacy b/Config.in.legacy
index 4101cb0..e44e8a9 100644
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -145,6 +145,27 @@ endif
###############################################################################
comment "Legacy options removed in 2016.08"
+config BR2_LINUX_KERNEL_TOOL_CPUPOWER
+ bool "linux-tool cpupower"
+ depends on BR2_LINUX_KERNEL
+ select BR2_PACKAGE_LINUX_TOOLS_CPUPOWER
+ help
+ Linux tool cpupower option was renamed.
+
+config BR2_LINUX_KERNEL_TOOL_PERF
+ bool "linux-tool perf"
+ depends on BR2_LINUX_KERNEL
+ select BR2_PACKAGE_LINUX_TOOLS_PERF
+ help
+ Linux tool perf option was renamed.
+
+config BR2_LINUX_KERNEL_TOOL_SELFTESTS
+ bool "linux-tool selftests"
+ depends on BR2_LINUX_KERNEL
+ select BR2_PACKAGE_LINUX_TOOLS_SELFTESTS
+ help
+ Linux tool selftests option was renamed.
+
config BR2_PACKAGE_SYSTEMD_COMPAT
bool "systemd compatibility libraries have been removed"
help
diff --git a/linux/Config.in b/linux/Config.in
index a4ff8bc..bfc4ea0 100644
--- a/linux/Config.in
+++ b/linux/Config.in
@@ -414,7 +414,7 @@ config BR2_LINUX_KERNEL_INSTALL_TARGET
source "linux/Config.ext.in"
# Linux tools
-source "linux/Config.tools.in"
+source "package/linux-tools/Config.in"
endif # BR2_LINUX_KERNEL
diff --git a/linux/linux.mk b/linux/linux.mk
index fb844ef..441449b 100644
--- a/linux/linux.mk
+++ b/linux/linux.mk
@@ -399,7 +399,7 @@ define LINUX_INSTALL_TARGET_CMDS
$(LINUX_INSTALL_HOST_TOOLS)
endef
-# Include all our extensions and tools definitions.
+# Include all our extensions.
#
# Note: our package infrastructure uses the full-path of the last-scanned
# Makefile to determine what package we're currently defining, using the
@@ -410,7 +410,6 @@ endef
# the current Makefile, we are OK. But this is a hard requirement: files
# included here *must* be in the same directory!
include $(sort $(wildcard linux/linux-ext-*.mk))
-include $(sort $(wildcard linux/linux-tool-*.mk))
LINUX_PATCH_DEPENDENCIES += $(foreach ext,$(LINUX_EXTENSIONS),\
$(if $(BR2_LINUX_KERNEL_EXT_$(call UPPERCASE,$(ext))),$(ext)))
@@ -419,27 +418,6 @@ LINUX_PRE_PATCH_HOOKS += $(foreach ext,$(LINUX_EXTENSIONS),\
$(if $(BR2_LINUX_KERNEL_EXT_$(call UPPERCASE,$(ext))),\
$(call UPPERCASE,$(ext))_PREPARE_KERNEL))
-# Install Linux kernel tools in the staging directory since some tools
-# may install shared libraries and headers (e.g. cpupower). The kernel
-# image is NOT installed in the staging directory.
-LINUX_INSTALL_STAGING = YES
-
-LINUX_DEPENDENCIES += $(foreach tool,$(LINUX_TOOLS),\
- $(if $(BR2_LINUX_KERNEL_TOOL_$(call UPPERCASE,$(tool))),\
- $($(call UPPERCASE,$(tool))_DEPENDENCIES)))
-
-LINUX_POST_BUILD_HOOKS += $(foreach tool,$(LINUX_TOOLS),\
- $(if $(BR2_LINUX_KERNEL_TOOL_$(call UPPERCASE,$(tool))),\
- $(call UPPERCASE,$(tool))_BUILD_CMDS))
-
-LINUX_POST_INSTALL_STAGING_HOOKS += $(foreach tool,$(LINUX_TOOLS),\
- $(if $(BR2_LINUX_KERNEL_TOOL_$(call UPPERCASE,$(tool))),\
- $(call UPPERCASE,$(tool))_INSTALL_STAGING_CMDS))
-
-LINUX_POST_INSTALL_TARGET_HOOKS += $(foreach tool,$(LINUX_TOOLS),\
- $(if $(BR2_LINUX_KERNEL_TOOL_$(call UPPERCASE,$(tool))),\
- $(call UPPERCASE,$(tool))_INSTALL_TARGET_CMDS))
-
# Checks to give errors that the user can understand
ifeq ($(BR_BUILDING),y)
diff --git a/linux/Config.tools.in b/package/linux-tools/Config.in
similarity index 81%
rename from linux/Config.tools.in
rename to package/linux-tools/Config.in
index 09bcfab..a78225a 100644
--- a/linux/Config.tools.in
+++ b/package/linux-tools/Config.in
@@ -1,15 +1,22 @@
menu "Linux Kernel Tools"
-config BR2_LINUX_KERNEL_TOOL_CPUPOWER
+# No prompt, this is sourced by linux/Config.in as this
+# is no real package and really belongs to the kernel.
+config BR2_PACKAGE_LINUX_TOOLS
+ bool
+
+config BR2_PACKAGE_LINUX_TOOLS_CPUPOWER
bool "cpupower"
depends on !BR2_bfin # pciutils
+ select BR2_PACKAGE_LINUX_TOOLS
select BR2_PACKAGE_PCIUTILS
help
cpupower is a collection of tools to examine and tune power
saving related features of your processor.
-config BR2_LINUX_KERNEL_TOOL_PERF
+config BR2_PACKAGE_LINUX_TOOLS_PERF
bool "perf"
+ select BR2_PACKAGE_LINUX_TOOLS
help
perf (sometimes "Perf Events" or perf tools, originally
"Performance Counters for Linux") - is a performance
@@ -26,10 +33,11 @@ config BR2_LINUX_KERNEL_TOOL_PERF
https://perf.wiki.kernel.org/
-config BR2_LINUX_KERNEL_TOOL_SELFTESTS
+config BR2_PACKAGE_LINUX_TOOLS_SELFTESTS
bool"selftests"
depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS # bash
depends on BR2_USE_MMU # bash
+ select BR2_PACKAGE_LINUX_TOOLS
select BR2_PACKAGE_BASH # runtime
select BR2_PACKAGE_POPT
select BR2_PACKAGE_LIBCAP_NG
diff --git a/linux/linux-tool-cpupower.mk b/package/linux-tools/linux-tool-cpupower.mk
similarity index 77%
rename from linux/linux-tool-cpupower.mk
rename to package/linux-tools/linux-tool-cpupower.mk
index 4551cda..65e5012 100644
--- a/linux/linux-tool-cpupower.mk
+++ b/package/linux-tools/linux-tool-cpupower.mk
@@ -13,26 +13,26 @@ CPUPOWER_MAKE_OPTS = CROSS=$(TARGET_CROSS) \
DEBUG=false
define CPUPOWER_BUILD_CMDS
- $(Q)if test ! -f $(@D)/tools/power/cpupower/Makefile ; then \
+ $(Q)if test ! -f $(@D)/linux/tools/power/cpupower/Makefile ; then \
echo "Your kernel version is too old and does not have the cpupower tool." ; \
echo "At least kernel 3.4 must be used." ; \
exit 1 ; \
fi
- $(TARGET_MAKE_ENV) $(MAKE) -C $(@D)/tools \
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D)/linux/tools \
$(CPUPOWER_MAKE_OPTS) \
cpupower
endef
define CPUPOWER_INSTALL_STAGING_CMDS
- $(TARGET_MAKE_ENV) $(MAKE) -C $(@D)/tools \
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D)/linux/tools \
$(CPUPOWER_MAKE_OPTS) \
DESTDIR=$(STAGING_DIR) \
cpupower_install
endef
define CPUPOWER_INSTALL_TARGET_CMDS
- $(TARGET_MAKE_ENV) $(MAKE) -C $(@D)/tools \
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D)/linux/tools \
$(CPUPOWER_MAKE_OPTS) \
DESTDIR=$(TARGET_DIR) \
cpupower_install
diff --git a/linux/linux-tool-perf.mk b/package/linux-tools/linux-tool-perf.mk
similarity index 85%
rename from linux/linux-tool-perf.mk
rename to package/linux-tools/linux-tool-perf.mk
index 8143474..e7264d8 100644
--- a/linux/linux-tool-perf.mk
+++ b/package/linux-tools/linux-tool-perf.mk
@@ -95,25 +95,25 @@ endif
# We name it 'GNUmakefile' so that GNU make will use it instead of
# the existing 'Makefile'.
define PERF_DISABLE_DOCUMENTATION
- if [ -f $(@D)/tools/perf/Documentation/Makefile ]; then \
- printf "%%:\n\t@:\n" >$(@D)/tools/perf/Documentation/GNUmakefile; \
+ if [ -f $(@D)/linux/tools/perf/Documentation/Makefile ]; then \
+ printf "%%:\n\t@:\n" >$(@D)/linux/tools/perf/Documentation/GNUmakefile; \
fi
endef
LINUX_POST_PATCH_HOOKS += PERF_DISABLE_DOCUMENTATION
# O must be redefined here to overwrite the one used by Buildroot for
-# out of tree build. We build perf in $(@D)/tools/perf/ and not just
-# $(@D) so that it isn't built in the root directory of the kernel
+# out of tree build. We build perf in $(@D)/linux/tools/perf/ and not just
+# $(@D)/linux so that it isn't built in the root directory of the kernel
# sources.
define PERF_BUILD_CMDS
- $(Q)if test ! -f $(@D)/tools/perf/Makefile ; then \
+ $(Q)if test ! -f $(@D)/linux/tools/perf/Makefile ; then \
echo "Your kernel version is too old and does not have the perf tool." ; \
echo "At least kernel 2.6.31 must be used." ; \
exit 1 ; \
fi
$(Q)if test "$(BR2_PACKAGE_ELFUTILS)" = "" ; then \
- if ! grep -q NO_LIBELF $(@D)/tools/perf/Makefile* ; then \
- if ! test -r $(@D)/tools/perf/config/Makefile ; then \
+ if ! grep -q NO_LIBELF $(@D)/linux/tools/perf/Makefile* ; then \
+ if ! test -r $(@D)/linux/tools/perf/config/Makefile ; then \
echo "The perf tool in your kernel cannot be built without libelf." ; \
echo "Either upgrade your kernel to >= 3.7, or enable the elfutils package." ; \
exit 1 ; \
@@ -121,14 +121,14 @@ define PERF_BUILD_CMDS
fi \
fi
$(TARGET_MAKE_ENV) $(MAKE1) $(PERF_MAKE_FLAGS) \
- -C $(@D)/tools/perf O=$(@D)/tools/perf/
+ -C $(@D)/linux/tools/perf O=$(@D)/linux/tools/perf/
endef
# After installation, we remove the Perl and Python scripts from the
# target.
define PERF_INSTALL_TARGET_CMDS
$(TARGET_MAKE_ENV) $(MAKE1) $(PERF_MAKE_FLAGS) \
- -C $(@D)/tools/perf O=$(@D)/tools/perf/ install
+ -C $(@D)/linux/tools/perf O=$(@D)/linux/tools/perf/ install
$(RM) -rf $(TARGET_DIR)/usr/libexec/perf-core/scripts/
$(RM) -rf $(TARGET_DIR)/usr/libexec/perf-core/tests/
endef
diff --git a/linux/linux-tool-selftests.mk b/package/linux-tools/linux-tool-selftests.mk
similarity index 65%
rename from linux/linux-tool-selftests.mk
rename to package/linux-tools/linux-tool-selftests.mk
index 3cbfed2..0ed7205 100644
--- a/linux/linux-tool-selftests.mk
+++ b/package/linux-tools/linux-tool-selftests.mk
@@ -23,8 +23,8 @@ SELFTESTS_MAKE_FLAGS = \
ARCH=$(SELFTESTS_ARCH)
# O must be redefined here to overwrite the one used by Buildroot for
-# out of tree build. We build the selftests in $(@D)/tools/selftests and
-# not just $(@D) so that it isn't built in the root directory of the kernel
+# out of tree build. We build the selftests in $(@D)/linux/tools/selftests and
+# not just $(@D)/linux so that it isn't built in the root directory of the kernel
# sources.
#
# The headers_install step here is important as some kernel selftests use a
@@ -33,14 +33,14 @@ SELFTESTS_MAKE_FLAGS = \
# The headers_install target will install the kernel headers locally inside
# the Linux build dir
define SELFTESTS_BUILD_CMDS
- $(TARGET_MAKE_ENV) $(MAKE1) -C $(@D) $(SELFTESTS_MAKE_FLAGS) \
+ $(TARGET_MAKE_ENV) $(MAKE1) -C $(@D)/linux $(SELFTESTS_MAKE_FLAGS) \
headers_install
- $(TARGET_MAKE_ENV) $(MAKE1) -C $(@D)/tools/testing/selftests \
- $(SELFTESTS_MAKE_FLAGS) O=$(@D)/tools/testing/selftests
+ $(TARGET_MAKE_ENV) $(MAKE1) -C $(@D)/linux/tools/testing/selftests \
+ $(SELFTESTS_MAKE_FLAGS) O=$(@D)/linux/tools/testing/selftests
endef
define SELFTESTS_INSTALL_TARGET_CMDS
- $(TARGET_MAKE_ENV) $(MAKE1) -C $(@D)/tools/testing/selftests \
- $(SELFTESTS_MAKE_FLAGS) O=$(@D)/tools/testing/selftests \
+ $(TARGET_MAKE_ENV) $(MAKE1) -C $(@D)/linux/tools/testing/selftests \
+ $(SELFTESTS_MAKE_FLAGS) O=$(@D)/linux/tools/testing/selftests \
INSTALL_PATH=$(TARGET_DIR)/usr/lib/kselftests install
endef
diff --git a/package/linux-tools/linux-tools.mk b/package/linux-tools/linux-tools.mk
new file mode 100644
index 0000000..a657967
--- /dev/null
+++ b/package/linux-tools/linux-tools.mk
@@ -0,0 +1,58 @@
+################################################################################
+#
+# linux-tools
+#
+################################################################################
+
+# Vampirising sources from the kernel tree
+LINUX_TOOLS_VERSION =
+LINUX_TOOLS_SOURCE =
+
+# We only need the kernel to be extracted, not actually built
+LINUX_TOOLS_PATCH_DEPENDENCIES = linux
+
+# Install Linux kernel tools in the staging directory since some tools
+# may install shared libraries and headers (e.g. cpupower).
+LINUX_TOOLS_INSTALL_STAGING = YES
+
+# Hack! To avoid extracting the kernel twice, we override the extract
+# commands to create a symlink to the kernel source tree.
+#
+# However, we can't have our own $(@D) be the symlink, or our stamp files
+# and those of the kernel would clash, and either one would not get built.
+#
+# Instead, we symlink into a sub-directory of our own $(@D).
+#
+define LINUX_TOOLS_EXTRACT_CMDS
+ ln -s $(LINUX_DIR) $(@D)/linux
+endef
+
+# Include all our tools definitions.
+#
+# Note: our package infrastructure uses the full-path of the last-scanned
+# Makefile to determine what package we're currently defining, using the
+# last directory component in the path. As such, including other Makefile,
+# like below, before we call one of the *-package macro is usally not
+# working.
+# However, since the files we include here are in the same directory as
+# the current Makefile, we are OK. But this is a hard requirement: files
+# included here *must* be in the same directory!
+include $(sort $(wildcard linux/linux-tools/linux-ext-*.mk))
+
+LINUX_TOOLS_DEPENDENCIES += $(foreach tool,$(LINUX_TOOLS),\
+ $(if $(BR2_PACKAGE_LINUX_TOOLS_$(call UPPERCASE,$(tool))),\
+ $($(call UPPERCASE,$(tool))_DEPENDENCIES)))
+
+LINUX_TOOLS_POST_BUILD_HOOKS += $(foreach tool,$(LINUX_TOOLS),\
+ $(if $(BR2_PACKAGE_LINUX_TOOLS_$(call UPPERCASE,$(tool))),\
+ $(call UPPERCASE,$(tool))_BUILD_CMDS))
+
+LINUX_TOOLS_POST_INSTALL_STAGING_HOOKS += $(foreach tool,$(LINUX_TOOLS),\
+ $(if $(BR2_PACKAGE_LINUX_TOOLS_$(call UPPERCASE,$(tool))),\
+ $(call UPPERCASE,$(tool))_INSTALL_STAGING_CMDS))
+
+LINUX_TOOLS_POST_INSTALL_TARGET_HOOKS += $(foreach tool,$(LINUX_TOOLS),\
+ $(if $(BR2_PACKAGE_LINUX_TOOLS_$(call UPPERCASE,$(tool))),\
+ $(call UPPERCASE,$(tool))_INSTALL_TARGET_CMDS))
+
+$(eval $(generic-package))
--
2.7.4
More information about the buildroot
mailing list