[Buildroot] Request for Help
BertHuber
3237-15 at online.de
Sat Nov 26 16:06:37 UTC 2016
I don't know. As I said I'm quite new to the whole Buildroot world.
How can I find out ? .. and if it is the wrong how do I install the right ?
_____
Von: Cassiano Martin [mailto:cassiano at polaco.pro.br]
Gesendet: Samstag, 26. November 2016 16:52
An: BertHuber
Cc: buildroot at busybox.net
Betreff: Re: [Buildroot] Request for Help
Right,
maybe an issue with iproute, are you using busybox one, or the real one,
from 'ip tools' package?
AFAIK bbox ip does not support can. I might be wrong too.
[]'s
2016-11-26 9:38 GMT-02:00 BertHuber <3237-15 at online.de>:
Hello,
I am new to this mailinglist and also quite new to the buildroot
environment.
I got stuck in my current project with the following problem:
I am currently trying to build an embedded Linux System with Buildroot.
It works so far, I get a bootable SD Card for my A20 based board.
I included all CAN Drivers & protocols I could find (can, can_raw and vcan)
My problem is : after booting and loggin in as root
I type:
ip link add dev vcan0 type vcan ---- THAT WORKS
but
ip link add dev can0 type can
produces:
RTNETLIINK answers: Operation not supported
What is wrong ?? Thanks in advance for any ideas.
Regards
Bert
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/
<http://lists.busybox.net/mailman/listinfo/buildroot>
mailman/listinfo/buildroot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20161126/f3d2821e/attachment-0002.html>
More information about the buildroot
mailing list