[Buildroot] [PATCH] systemd: let getty instead of serial-getty handle /dev/console
Peter Seiderer
ps.report at gmx.net
Sun Sep 25 21:44:14 UTC 2016
Hello Floris,
On Thu, 22 Sep 2016 21:25:59 +0200, Floris Bos <bos at je-eigen-domein.nl> wrote:
> On 09/22/2016 08:50 PM, Peter Seiderer wrote:
> > Hello Floris,
> >
> > On Wed, 21 Sep 2016 23:47:02 +0200, Floris Bos <bos at je-eigen-domein.nl> wrote:
> >
> >> On 09/21/2016 10:05 PM, Peter Seiderer wrote:
> >>> Hello *,
> >>>
> >>> On Wed, 21 Sep 2016 09:01:37 +0200, Peter Korsgaard <peter at korsgaard.com> wrote:
> >>>
> >>>>>>>>> "Yann" == Yann E MORIN <yann.morin.1998 at free.fr> writes:
> >>>> > Floris, All,
> >>>> > On 2016-09-09 18:10 +0200, Floris Bos spake thusly:
> >>>> >> The serial-getty unit depends on dev-%i.device which does not
> >>>> >> seem to be created for /dev/console
> >>>> >> Workaround this by letting normal getty unit handle things
> >>>> >> if BR2_TARGET_GENERIC_GETTY_PORT is set to 'console'
> >>>> >>
> >>>> >> Signed-off-by: Floris Bos <bos at je-eigen-domein.nl>
> >>>>
> >>>> > I haven't tested that, but I think this is OK just on principle.
> >>>>
> >>>> > I just wonder if that behaves correctly when console is a serial line or
> >>>> > anything else (e.g. a VT on HDMI, or through a debug channel...)
> >>>>
> >>>> Yeah, me too. Does anybody know what the difference exactly is between
> >>>> getty/serial-getty, and when one should be used over the other?
> >>>>
> >>> Tested for the rpi3/glibc/systemd case and failed: I get a doubled
> >>> (and unusable) ' Welcome to Buildroot/buildroot login:' on serial and
> >>> no login on hdmi...
> >> Empty cmdline.txt will give hdmi.
> >>
> >> Recall you need "console=serial0,115200 console=tty1" with tty1 last in
> >> cmdline.txt if you want them simultaneous.
> > Changed cmdline.txt to:
> >
> > root=/dev/mmcblk0p2 rootwait console=ttyAMA0,115200 console=tty1
> >
> > Which gives me two (functional) logins on serial and hdmi.
> >
> > But I think changing package/rpi-firmware/cmdline.txt unconditional will
> > break the other Init systems, see commit log from last patch touching
> > cmdline.txt ([1):
> >
> > ...change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts a
> > getty on the last console= passed to the kernel, ttyAMA0...
>
> Will withdraw my patch then, and wait for someone else to come up with a
> better solution.
>
Ups, sorry, did not want to discourage you...
> I think the one-size-fits all cmdline.txt that listens to both on HDMI
> and serial console by default makes things too complicated anyway.
>
Maybe its feasible to list all wanted login ports in BR2_TARGET_GENERIC_GETTY_PORT
and only add the specified named systemd service links (an no generator ones)?
Regards,
Peter
>
> Yours sincerely,
>
> Floris Bos
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
More information about the buildroot
mailing list