[Buildroot] [PATCH 03/13] MIPS: replace every BR2_mips_* with the new MIPS CPU options
Vicente Olivert Riera
Vincent.Riera at imgtec.com
Fri Sep 30 09:36:49 UTC 2016
Signed-off-by: Vicente Olivert Riera <Vincent.Riera at imgtec.com>
---
package/binutils/Config.in.host | 2 +-
package/gcc/Config.in.host | 6 +++---
package/glibc/glibc.mk | 2 +-
package/gmp/gmp.mk | 2 +-
package/go/Config.in.host | 2 +-
package/gstreamer/gst-ffmpeg/Config.in | 2 +-
package/luajit/Config.in | 2 +-
package/mbedtls/mbedtls.mk | 2 +-
package/mongrel2/mongrel2.mk | 2 +-
package/nodejs/nodejs.mk | 6 +++---
package/openblas/Config.in | 6 +++---
package/polarssl/polarssl.mk | 2 +-
package/uclibc/Config.in | 6 +++---
toolchain/toolchain-buildroot/Config.in | 4 ++--
toolchain/toolchain-external/Config.in | 8 ++++----
15 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/package/binutils/Config.in.host b/package/binutils/Config.in.host
index 51ee2cc..7f95599 100644
--- a/package/binutils/Config.in.host
+++ b/package/binutils/Config.in.host
@@ -12,7 +12,7 @@ choice
# supported, but broken on Nios-II, Blackfin and powerpc64le
depends on !BR2_nios2 && !BR2_powerpc64le && !BR2_bfin
# Unsupported for MIPS R6
- depends on !BR2_mips_32r6 && !BR2_mips_64r6
+ depends on !BR2_MIPS_CPU_MIPS32R6 && !BR2_MIPS_CPU_MIPS64R6
# Unsupported ARM cores
depends on !BR2_cortex_a17
bool "binutils 2.24"
diff --git a/package/gcc/Config.in.host b/package/gcc/Config.in.host
index 6ecc2f0..80bb880 100644
--- a/package/gcc/Config.in.host
+++ b/package/gcc/Config.in.host
@@ -29,7 +29,7 @@ choice
# Broken or unsupported x86 cores
depends on !BR2_x86_jaguar && !BR2_x86_steamroller
# Unsupported for MIPS R6
- depends on !BR2_mips_32r6 && !BR2_mips_64r6
+ depends on !BR2_MIPS_CPU_MIPS32R6 && !BR2_MIPS_CPU_MIPS64R6
# musl ppc64 unsupported
depends on !(BR2_TOOLCHAIN_USES_MUSL && (BR2_powerpc64 || BR2_powerpc64el))
select BR2_GCC_NEEDS_MPC
@@ -47,7 +47,7 @@ choice
# gcc-4.8.x + binutils-2.25 is broken for MIPS
depends on !((BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el) && BR2_BINUTILS_VERSION_2_25_X)
# Unsupported for MIPS R6
- depends on !BR2_mips_32r6 && !BR2_mips_64r6
+ depends on !BR2_MIPS_CPU_MIPS32R6 && !BR2_MIPS_CPU_MIPS64R6
# musl ppc64 unsupported
depends on !(BR2_TOOLCHAIN_USES_MUSL && (BR2_powerpc64 || BR2_powerpc64el))
# musl mips64 unsupported
@@ -71,7 +71,7 @@ choice
# Broken or unsupported ARM cores
depends on !BR2_cortex_a17
# Unsupported for MIPS R6
- depends on !BR2_mips_32r6 && !BR2_mips_64r6
+ depends on !BR2_MIPS_CPU_MIPS32R6 && !BR2_MIPS_CPU_MIPS64R6
# musl ppc64 unsupported
depends on !(BR2_TOOLCHAIN_USES_MUSL && (BR2_powerpc64 || BR2_powerpc64el))
# musl mips64 unsupported
diff --git a/package/glibc/glibc.mk b/package/glibc/glibc.mk
index 2c32e65..50154e8 100644
--- a/package/glibc/glibc.mk
+++ b/package/glibc/glibc.mk
@@ -136,7 +136,7 @@ endef
# highly unlikely. The failure mode, if it ever occurs, would be either
# that a signalling NaN fails to raise an invalid operation exception or
# (more likely) an ordinary NaN raises an invalid operation exception.
-ifeq ($(BR2_mips_32r6)$(BR2_mips_64r6),y)
+ifeq ($(BR2_MIPS_CPU_MIPS32R6)$(BR2_MIPS_CPU_MIPS64R6),y)
define GLIBC_FIX_MIPS_R6
$(SED) 's#10.0.0#4.0.0#' \
$(@D)/sysdeps/unix/sysv/linux/mips/configure \
diff --git a/package/gmp/gmp.mk b/package/gmp/gmp.mk
index 420fd2f..843a7a1 100644
--- a/package/gmp/gmp.mk
+++ b/package/gmp/gmp.mk
@@ -15,7 +15,7 @@ HOST_GMP_DEPENDENCIES = host-m4
# GMP doesn't support assembly for coldfire or mips r6 ISA yet
# Disable for ARM v7m since it has different asm constraints
-ifeq ($(BR2_m68k_cf)$(BR2_mips_32r6)$(BR2_mips_64r6)$(BR2_ARM_CPU_ARMV7M)$(BR2_arc),y)
+ifeq ($(BR2_m68k_cf)$(BR2_MIPS_CPU_MIPS32R6)$(BR2_MIPS_CPU_MIPS64R6)$(BR2_ARM_CPU_ARMV7M)$(BR2_arc),y)
GMP_CONF_OPTS += --disable-assembly
endif
diff --git a/package/go/Config.in.host b/package/go/Config.in.host
index d79c669..8d4d346 100644
--- a/package/go/Config.in.host
+++ b/package/go/Config.in.host
@@ -6,7 +6,7 @@ config BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS
|| BR2_mips64 || BR2_mips64el
depends on !BR2_ARM_CPU_ARMV4
# MIPS R6 support in Go has not yet been developed.
- depends on !BR2_mips_64r6
+ depends on !BR2_MIPS_CPU_MIPS64R6
config BR2_PACKAGE_HOST_GO_CGO_LINKING_SUPPORTS
bool
diff --git a/package/gstreamer/gst-ffmpeg/Config.in b/package/gstreamer/gst-ffmpeg/Config.in
index f3d4b3e..2164ea2 100644
--- a/package/gstreamer/gst-ffmpeg/Config.in
+++ b/package/gstreamer/gst-ffmpeg/Config.in
@@ -2,7 +2,7 @@ config BR2_PACKAGE_GST_FFMPEG
bool "gst-ffmpeg"
# Unsupported for MIPS R6. It bundles a version of libav which
# doesn't have support for MIPS R6.
- depends on !BR2_mips_32r6 && !BR2_mips_64r6
+ depends on !BR2_MIPS_CPU_MIPS32R6 && !BR2_MIPS_CPU_MIPS64R6
# triggers https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65151 on sh
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_5 || !BR2_sh
select BR2_PACKAGE_GST_PLUGINS_BASE
diff --git a/package/luajit/Config.in b/package/luajit/Config.in
index f9285e8..380f247 100644
--- a/package/luajit/Config.in
+++ b/package/luajit/Config.in
@@ -4,7 +4,7 @@ config BR2_PACKAGE_LUAJIT_ARCH_SUPPORTS
(BR2_x86_64 && BR2_HOSTARCH='x86_64') || \
BR2_powerpc || BR2_arm || BR2_armeb || \
((BR2_mips || BR2_mipsel) && !BR2_MIPS_SOFT_FLOAT && \
- !BR2_mips_32r6 && !BR2_mips_64r6)
+ !BR2_MIPS_CPU_MIPS32R6 && !BR2_MIPS_CPU_MIPS64R6)
config BR2_PACKAGE_LUAJIT
bool "luajit"
diff --git a/package/mbedtls/mbedtls.mk b/package/mbedtls/mbedtls.mk
index 994a3f4..b6fe1d5 100644
--- a/package/mbedtls/mbedtls.mk
+++ b/package/mbedtls/mbedtls.mk
@@ -60,7 +60,7 @@ endef
# MIPS R6 asm is not yet supported
ifeq ($(BR2_ENABLE_DEBUG)$(BR2_ARM_INSTRUCTIONS_THUMB)$(BR2_ARM_INSTRUCTIONS_THUMB2),yy)
MBEDTLS_POST_CONFIGURE_HOOKS += MBEDTLS_DISABLE_ASM
-else ifeq ($(BR2_microblaze)$(BR2_mips_32r6)$(BR2_mips_64r6),y)
+else ifeq ($(BR2_microblaze)$(BR2_MIPS_CPU_MIPS32R6)$(BR2_MIPS_CPU_MIPS64R6),y)
MBEDTLS_POST_CONFIGURE_HOOKS += MBEDTLS_DISABLE_ASM
endif
diff --git a/package/mongrel2/mongrel2.mk b/package/mongrel2/mongrel2.mk
index d0640c9..c69c143 100644
--- a/package/mongrel2/mongrel2.mk
+++ b/package/mongrel2/mongrel2.mk
@@ -24,7 +24,7 @@ ifeq ($(BR2_ENABLE_DEBUG)$(BR2_ARM_INSTRUCTIONS_THUMB)$(BR2_ARM_INSTRUCTIONS_THU
MONGREL2_POST_CONFIGURE_HOOKS += MONGREL2_POLARSSL_DISABLE_ASM
else ifeq ($(BR2_microblaze),y)
MONGREL2_POST_CONFIGURE_HOOKS += MONGREL2_POLARSSL_DISABLE_ASM
-else ifeq ($(BR2_mips_32r6)$(BR2_mips_64r6),y)
+else ifeq ($(BR2_MIPS_CPU_MIPS32R6)$(BR2_MIPS_CPU_MIPS64R6),y)
MONGREL2_POST_CONFIGURE_HOOKS += MONGREL2_POLARSSL_DISABLE_ASM
endif
diff --git a/package/nodejs/nodejs.mk b/package/nodejs/nodejs.mk
index d6f115a..81006f5 100644
--- a/package/nodejs/nodejs.mk
+++ b/package/nodejs/nodejs.mk
@@ -96,12 +96,12 @@ endif
# MIPS architecture specific options
ifeq ($(BR2_mips)$(BR2_mipsel),y)
-ifeq ($(BR2_mips_32r6),y)
+ifeq ($(BR2_MIPS_CPU_MIPS32R6),y)
NODEJS_MIPS_ARCH_VARIANT = r6
NODEJS_MIPS_FPU_MODE = fp64
-else ifeq ($(BR2_mips_32r2),y)
+else ifeq ($(BR2_MIPS_CPU_MIPS32R2),y)
NODEJS_MIPS_ARCH_VARIANT = r2
-else ifeq ($(BR2_mips_32),y)
+else ifeq ($(BR2_MIPS_CPU_MIPS32),y)
NODEJS_MIPS_ARCH_VARIANT = r1
endif
endif
diff --git a/package/openblas/Config.in b/package/openblas/Config.in
index 0609a91..1fbed1c 100644
--- a/package/openblas/Config.in
+++ b/package/openblas/Config.in
@@ -27,10 +27,10 @@ config BR2_PACKAGE_OPENBLAS_DEFAULT_TARGET
default "PPC440" if BR2_powerpc_440
default "PPC440FP2" if BR2_powerpc_440fp
# P5600 is built with MSA support which is only available in Codescape toolchains
- default "P5600" if BR2_mips_32r2 && BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_MTI_MIPS
- default "SICORTEX" if BR2_mips_64
+ default "P5600" if BR2_MIPS_CPU_MIPS32R2 && BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_MTI_MIPS
+ default "SICORTEX" if BR2_MIPS_CPU_MIPS64
# I6400 is built with MSA support which is only available in Codescape toolchains
- default "I6400" if BR2_mips_64r6 && BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_IMG_MIPS
+ default "I6400" if BR2_MIPS_CPU_MIPS64R6 && BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_IMG_MIPS
default "SPARC" if BR2_sparc
# Cortex-A15 always have a VFPv4
default "CORTEXA15" if (BR2_cortex_a15 && BR2_ARM_EABIHF)
diff --git a/package/polarssl/polarssl.mk b/package/polarssl/polarssl.mk
index 9199f28..7f4c582 100644
--- a/package/polarssl/polarssl.mk
+++ b/package/polarssl/polarssl.mk
@@ -25,7 +25,7 @@ ifeq ($(BR2_ENABLE_DEBUG)$(BR2_ARM_INSTRUCTIONS_THUMB)$(BR2_ARM_INSTRUCTIONS_THU
POLARSSL_POST_CONFIGURE_HOOKS += POLARSSL_DISABLE_ASM
else ifeq ($(BR2_microblaze),y)
POLARSSL_POST_CONFIGURE_HOOKS += POLARSSL_DISABLE_ASM
-else ifeq ($(BR2_mips_32r6)$(BR2_mips_64r6),y)
+else ifeq ($(BR2_MIPS_CPU_MIPS32R6)$(BR2_MIPS_CPU_MIPS64R6),y)
POLARSSL_POST_CONFIGURE_HOOKS += POLARSSL_DISABLE_ASM
endif
diff --git a/package/uclibc/Config.in b/package/uclibc/Config.in
index 33969cc..cbae096 100644
--- a/package/uclibc/Config.in
+++ b/package/uclibc/Config.in
@@ -145,9 +145,9 @@ config BR2_UCLIBC_MIPS_ABI
config BR2_UCLIBC_MIPS_ISA
string
depends on BR2_UCLIBC_TARGET_ARCH = "mips"
- default "MIPS32" if BR2_mips_32
- default "MIPS32R2" if BR2_mips_32r2
- default "MIPS64" if BR2_mips_64
+ default "MIPS32" if BR2_MIPS_CPU_MIPS32
+ default "MIPS32R2" if BR2_MIPS_CPU_MIPS32R2
+ default "MIPS64" if BR2_MIPS_CPU_MIPS64
config BR2_UCLIBC_SH_TYPE
string
diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in
index 8e275c2..310572e 100644
--- a/toolchain/toolchain-buildroot/Config.in
+++ b/toolchain/toolchain-buildroot/Config.in
@@ -35,7 +35,7 @@ config BR2_TOOLCHAIN_BUILDROOT_UCLIBC
BR2_powerpc || BR2_sh2a || BR2_sh4 || BR2_sh4eb || \
BR2_sparc || BR2_xtensa || BR2_x86_64
# Unsupported for MIPS R6
- depends on !BR2_mips_32r6 && !BR2_mips_64r6
+ depends on !BR2_MIPS_CPU_MIPS32R6 && !BR2_MIPS_CPU_MIPS64R6
help
This option selects uClibc-ng as the C library for the
cross-compilation toolchain.
@@ -74,7 +74,7 @@ config BR2_TOOLCHAIN_BUILDROOT_MUSL
BR2_sh || BR2_x86_64
depends on !BR2_powerpc_SPE # not supported, build breaks
# Unsupported for MIPS R6
- depends on !BR2_mips_32r6 && !BR2_mips_64r6
+ depends on !BR2_MIPS_CPU_MIPS32R6 && !BR2_MIPS_CPU_MIPS64R6
# sh2 nommu is supported by musl, but we don't have support
# for it in Buildroot.
depends on BR2_USE_MMU
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index 2b17b7a..b097a67 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -190,7 +190,7 @@ config BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS
bool "Sourcery CodeBench MIPS 2016.05"
depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
- depends on BR2_mips_32r2 || BR2_mips_64r2
+ depends on BR2_MIPS_CPU_MIPS32R2 || BR2_MIPS_CPU_MIPS64R2
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_MIPS_NABI32
depends on !BR2_STATIC_LIBS
@@ -283,7 +283,7 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_IMG_MIPS
bool "Codescape IMG GNU Linux Toolchain 2016.05"
depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
- depends on BR2_mips_32r6 || (BR2_mips_64r6 && !BR2_MIPS_SOFT_FLOAT)
+ depends on BR2_MIPS_CPU_MIPS32R6 || (BR2_MIPS_CPU_MIPS64R6 && !BR2_MIPS_SOFT_FLOAT)
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
@@ -346,7 +346,7 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_MTI_MIPS
bool "Codescape MTI GNU Linux Toolchain 2016.05"
depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
- depends on BR2_mips_32r2 || (BR2_mips_64r2 && !BR2_MIPS_SOFT_FLOAT)
+ depends on BR2_MIPS_CPU_MIPS32R2 || (BR2_MIPS_CPU_MIPS64R2 && !BR2_MIPS_SOFT_FLOAT)
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
@@ -595,7 +595,7 @@ config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS
BR2_x86_64
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
# Unsupported for MIPS R6
- depends on !BR2_mips_32r6 && !BR2_mips_64r6
+ depends on !BR2_MIPS_CPU_MIPS32R6 && !BR2_MIPS_CPU_MIPS64R6
select BR2_TOOLCHAIN_EXTERNAL_MUSL
select BR2_TOOLCHAIN_HAS_SSP
select BR2_INSTALL_LIBSTDCPP
--
2.10.0
More information about the buildroot
mailing list