[Buildroot] [PATCH] ncftp: use tar.gz to workaround upstream changing tarball post-release

[Peter Korsgaard]

>>>>> "Peter" == Peter Korsgaard <peter at korsgaard.com> writes:

 > As explained here:
 > http://lists.busybox.net/pipermail/buildroot/2017-March/185550.html

 > Upstream has silently updated their 3.2.6 tarball some time between our
 > version bump in late November and December 4th.  The changed tarball also
 > contains a significant amount of source changes:

 >  libncftp/c_opennologin.c  |    4
 >  libncftp/ftp.c            |   31
 >  libncftp/ftw.c            |    2
 >  libncftp/io_getmem.c      |    2
 >  libncftp/io_list.c        |    6
 >  libncftp/io_sendfile.c    |    4
 >  libncftp/io_util.c        |    4
 >  libncftp/ncftp.h          |    2
 >  libncftp/open.c           |    4
 >  libncftp/rftw.c           |    2
 >  libncftp/rglobr.c         |    2
 >  libncftp/u_decodehost.c   |    2
 >  libncftp/u_decodeurl.c    |    2
 >  libncftp/u_getpass.c      |    2
 >  libncftp/u_misc.c         |    2
 >  libncftp/u_pathcat.c      |    4
 >  libncftp/u_scram.c        |    2
 >  libncftp/wincfg.h         |    1
 >  ncftp/cmds.c              |   38 -
 >  ncftp/gl_getline.c        |   26
 >  ncftp/ls.c                |    9
 >  ncftp/ls.h                |    9
 >  ncftp/progress.c          |    9
 >  ncftp/readln.c            |    4
 >  ncftp/shell.h             |   10
 >  ncftp/spoolutil.c         |    8
 >  ncftp/version.c           |    2
 >  sh/mksrctar.sh            |    1
 >  sh_util/gpshare.c         |   12
 >  sh_util/ncftpbatch.c      |  110 --
 >  sh_util/ncftpget.c        |    6
 >  sh_util/ncftpls.c         |    5
 >  sh_util/ncftpput.c        |   14
 >  sio/DNSUtil.c             |    4
 >  sio/Makefile.in           |   16
 >  sio/SBind.c               |   35
 >  sio/SConnect.c            |    9
 >  sio/SNew.c                |  115 ---
 >  sio/SRead.c               |    6
 >  sio/StrAddr.c             |    6
 >  sio/config.h.in           |   24
 >  sio/configure.in          |    8
 >  sio/sio.h                 |   18
 >  sio/wincfg.h              |    1
 >  vis/bmed.c                |   13
 >  vis/wgets.c               |   12
 >  vis/wgets.h               |    7
 >  vis/wutil.c               |    6
 >  vis/wutil.h               |    6

 > Upstream has been contacted to verify if this change was intentional and the
 > reason why. From the mail:

 >> Is this update intentional? Why was the tarball regenerated?

 > Yes.

 > The old hash was unfortunately already used in the 2017.02 (and .1)
 > releases, so just changing the hash and updating the tarball on
 > sources.buildroot.org would break ncftp for users of those releases.
 > Instead change to use the .tar.gz tarball as suggested by Arnout.

 > Cc: Arnout Vandecappelle <arnout at mind.be>
 > Signed-off-by: Peter Korsgaard <peter at korsgaard.com>

Committed, thanks.

-- 
Bye, Peter Korsgaard