[Buildroot] [PATCH v2 4/4] configs/mx6sx_udoo_neo: Bump to kernel 4.10

Fabio Estevam festevam at gmail.com
Mon Feb 20 11:57:36 UTC 2017


The imx6sx-udoo-neo dts patches have been upstreamed in kernel 4.10,
so bump to this version and remove the local patches.

Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
Changes since v1:
- Use BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_10 (Baruch)

 .../neo/patches/linux/0001-udoo_neo_support.patch  | 560 ---------------------
 configs/mx6sx_udoo_neo_defconfig                   |   7 +-
 2 files changed, 3 insertions(+), 564 deletions(-)
 delete mode 100644 board/udoo/neo/patches/linux/0001-udoo_neo_support.patch

diff --git a/board/udoo/neo/patches/linux/0001-udoo_neo_support.patch b/board/udoo/neo/patches/linux/0001-udoo_neo_support.patch
deleted file mode 100644
index 2e8cea5..0000000
--- a/board/udoo/neo/patches/linux/0001-udoo_neo_support.patch
+++ /dev/null
@@ -1,560 +0,0 @@
-From 76e691fc7653b85d390e58710e5c7db73ca49367 Mon Sep 17 00:00:00 2001
-From: Andreas Färber <afaerber at suse.de>
-Date: Sun, 16 Oct 2016 16:44:23 +0200
-Subject: ARM: dts: imx6sx: Add UDOO Neo support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add initial device trees for UDOO Neo Basic, Extended and Full boards:
-* Serial console is enabled, other serial ports are prepared.
-* I2C based PMIC is enabled.
-* Ethernet is enabled for Basic and Full.
-* SDHC is enabled, with the SDIO_PWR GPIO modeled as a regulator.
-* Both user LEDs are enabled, with the orange one reserved for the M4
-  and with the SD card as default trigger for the red LED.
-
-The decision on a board compatible string is deferred to later.
-
-Cc: Ettore Chimenti <ettore.chimenti at udoo.org>
-Signed-off-by: Andreas Färber <afaerber at suse.de>
-Signed-off-by: Shawn Guo <shawnguo at kernel.org>
----
- arch/arm/boot/dts/Makefile                     |   5 +-
- arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts    |  69 ++++++
- arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts |  54 +++++
- arch/arm/boot/dts/imx6sx-udoo-neo-full.dts     |  69 ++++++
- arch/arm/boot/dts/imx6sx-udoo-neo.dtsi         | 293 +++++++++++++++++++++++++
- 5 files changed, 489 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
- create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
- create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
- create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 019976b..da0197d 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -417,7 +417,10 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
- 	imx6sx-sabreauto.dtb \
- 	imx6sx-sdb-reva.dtb \
- 	imx6sx-sdb-sai.dtb \
--	imx6sx-sdb.dtb
-+	imx6sx-sdb.dtb \
-+	imx6sx-udoo-neo-basic.dtb \
-+	imx6sx-udoo-neo-extended.dtb \
-+	imx6sx-udoo-neo-full.dtb
- dtb-$(CONFIG_SOC_IMX6UL) += \
- 	imx6ul-14x14-evk.dtb \
- 	imx6ul-geam-kit.dtb \
-diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
-new file mode 100644
-index 0000000..0b88878
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
-@@ -0,0 +1,69 @@
-+/*
-+ * Copyright (c) 2016 Andreas Färber
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This library is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This library is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6sx-udoo-neo.dtsi"
-+
-+/ {
-+	model = "UDOO Neo Basic";
-+	compatible = "fsl,imx6sx";
-+
-+	memory {
-+		reg = <0x80000000 0x20000000>;
-+	};
-+};
-+
-+&fec1 {
-+	phy-handle = <&ethphy1>;
-+	status = "okay";
-+
-+	mdio {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		ethphy1: ethernet-phy at 0 {
-+			compatible = "ethernet-phy-ieee802.3-c22";
-+			reg = <0>;
-+		};
-+	};
-+};
-diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
-new file mode 100644
-index 0000000..d6fdd17
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
-@@ -0,0 +1,54 @@
-+/*
-+ * Copyright (c) 2016 Andreas Färber
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This library is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This library is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6sx-udoo-neo.dtsi"
-+
-+/ {
-+	model = "UDOO Neo Extended";
-+	compatible = "fsl,imx6sx";
-+
-+	memory {
-+		reg = <0x80000000 0x40000000>;
-+	};
-+};
-diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
-new file mode 100644
-index 0000000..d8c3577
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
-@@ -0,0 +1,69 @@
-+/*
-+ * Copyright (c) 2016 Andreas Färber
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This library is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This library is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6sx-udoo-neo.dtsi"
-+
-+/ {
-+	model = "UDOO Neo Full";
-+	compatible = "fsl,imx6sx";
-+
-+	memory {
-+		reg = <0x80000000 0x40000000>;
-+	};
-+};
-+
-+&fec1 {
-+	phy-handle = <&ethphy1>;
-+	status = "okay";
-+
-+	mdio {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		ethphy1: ethernet-phy at 0 {
-+			compatible = "ethernet-phy-ieee802.3-c22";
-+			reg = <0>;
-+		};
-+	};
-+};
-diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
-new file mode 100644
-index 0000000..2b65d26
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
-@@ -0,0 +1,293 @@
-+/*
-+ * Copyright (c) 2016 Andreas Färber
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This library is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This library is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "imx6sx.dtsi"
-+
-+/ {
-+	compatible = "fsl,imx6sx";
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		red {
-+			label = "udoo-neo:red:mmc";
-+			gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
-+			default-state = "off";
-+			linux,default-trigger = "mmc0";
-+		};
-+
-+		orange {
-+			label = "udoo-neo:orange:user";
-+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
-+			default-state = "keep";
-+		};
-+	};
-+
-+	reg_sdio_pwr: regulator-sdio-pwr {
-+		compatible = "regulator-fixed";
-+		gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
-+		enable-active-high;
-+		regulator-name = "SDIO_PWR";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		regulator-boot-on;
-+	};
-+};
-+
-+&cpu0 {
-+	arm-supply = <&sw1a_reg>;
-+	soc-supply = <&sw1c_reg>;
-+};
-+
-+&fec1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_enet1>;
-+	phy-mode = "rmii";
-+	phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_i2c1>;
-+	clock-frequency = <100000>;
-+	status = "okay";
-+
-+	pmic: pmic at 08 {
-+		compatible = "fsl,pfuze3000";
-+		reg = <0x08>;
-+
-+		regulators {
-+			sw1a_reg: sw1a {
-+				regulator-min-microvolt = <700000>;
-+				regulator-max-microvolt = <1475000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+				regulator-ramp-delay = <6250>;
-+			};
-+
-+			sw1c_reg: sw1b {
-+				regulator-min-microvolt = <700000>;
-+				regulator-max-microvolt = <1475000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+				regulator-ramp-delay = <6250>;
-+			};
-+
-+			sw2_reg: sw2 {
-+				regulator-min-microvolt = <1500000>;
-+				regulator-max-microvolt = <1850000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			sw3a_reg: sw3 {
-+				regulator-min-microvolt = <900000>;
-+				regulator-max-microvolt = <1650000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			swbst_reg: swbst {
-+				regulator-min-microvolt = <5000000>;
-+				regulator-max-microvolt = <5150000>;
-+			};
-+
-+			snvs_reg: vsnvs {
-+				regulator-min-microvolt = <1000000>;
-+				regulator-max-microvolt = <3000000>;
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			vref_reg: vrefddr {
-+				regulator-boot-on;
-+				regulator-always-on;
-+			};
-+
-+			vgen1_reg: vldo1 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+
-+			vgen2_reg: vldo2 {
-+				regulator-min-microvolt = <800000>;
-+				regulator-max-microvolt = <1550000>;
-+			};
-+
-+			vgen3_reg: vccsd {
-+				regulator-min-microvolt = <2850000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+
-+			vgen4_reg: v33 {
-+				regulator-min-microvolt = <2850000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+
-+			vgen5_reg: vldo3 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+
-+			vgen6_reg: vldo4 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-always-on;
-+			};
-+		};
-+	};
-+};
-+
-+&iomuxc {
-+	pinctrl_enet1: enet1grp {
-+		fsl,pins =
-+			<MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0xa0b1>,
-+			<MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1>,
-+			<MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1>,
-+			<MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1>,
-+			<MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1>,
-+			<MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1>,
-+
-+			<MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x3081>,
-+			<MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0x3081>,
-+			<MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081>,
-+			<MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081>,
-+			<MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081>,
-+			<MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER	0x3081>,
-+
-+			<MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91>;
-+	};
-+
-+	pinctrl_i2c1: i2c1grp {
-+		fsl,pins =
-+			<MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1>,
-+			<MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1>;
-+	};
-+
-+	pinctrl_uart1: uart1grp {
-+		fsl,pins =
-+			<MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1>,
-+			<MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1>;
-+	};
-+
-+	pinctrl_uart2: uart2grp {
-+		fsl,pins =
-+			<MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1>,
-+			<MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1>;
-+	};
-+
-+	pinctrl_uart5: uart5grp {
-+		fsl,pins =
-+			<MX6SX_PAD_SD4_DATA4__UART5_RX		0x1b0b1>,
-+			<MX6SX_PAD_SD4_DATA5__UART5_TX		0x1b0b1>;
-+	};
-+
-+	pinctrl_uart6: uart6grp {
-+		fsl,pins =
-+			<MX6SX_PAD_CSI_DATA00__UART6_RI_B	0x1b0b1>,
-+			<MX6SX_PAD_CSI_DATA01__UART6_DSR_B	0x1b0b1>,
-+			<MX6SX_PAD_CSI_DATA02__UART6_DTR_B	0x1b0b1>,
-+			<MX6SX_PAD_CSI_DATA03__UART6_DCD_B	0x1b0b1>,
-+			<MX6SX_PAD_CSI_DATA04__UART6_RX		0x1b0b1>,
-+			<MX6SX_PAD_CSI_DATA05__UART6_TX		0x1b0b1>,
-+			<MX6SX_PAD_CSI_DATA06__UART6_RTS_B	0x1b0b1>,
-+			<MX6SX_PAD_CSI_DATA07__UART6_CTS_B	0x1b0b1>;
-+	};
-+
-+	pinctrl_usdhc2: usdhc2grp {
-+		fsl,pins =
-+			<MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059>,
-+			<MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059>,
-+			<MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059>,
-+			<MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059>,
-+			<MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059>,
-+			<MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059>,
-+			<MX6SX_PAD_SD1_DATA0__GPIO6_IO_2	0x17059>; /* CD */
-+	};
-+};
-+
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart1>;
-+	status = "okay";
-+};
-+
-+/* Cortex-M4 serial */
-+&uart2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart2>;
-+	status = "disabled";
-+};
-+
-+/* Arduino serial */
-+&uart5 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart5>;
-+	status = "disabled";
-+};
-+
-+&uart6 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart6>;
-+	uart-has-rtscts;
-+	status = "disabled";
-+};
-+
-+&usdhc2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_usdhc2>;
-+	vmmc-supply = <&reg_sdio_pwr>;
-+	bus-width = <4>;
-+	cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
-+	no-1-8-v;
-+	keep-power-in-suspend;
-+	wakeup-source;
-+	status = "okay";
-+};
--- 
-cgit v0.12
diff --git a/configs/mx6sx_udoo_neo_defconfig b/configs/mx6sx_udoo_neo_defconfig
index a465eb9..53f0ee8 100644
--- a/configs/mx6sx_udoo_neo_defconfig
+++ b/configs/mx6sx_udoo_neo_defconfig
@@ -3,11 +3,10 @@ BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.10 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_10=y
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/udoo/neo/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/udoo/neo/post-image.sh"
-BR2_GLOBAL_PATCH_DIR="board/udoo/neo/patches"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
@@ -19,7 +18,7 @@ BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="SPL"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.10"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-udoo-neo-basic imx6sx-udoo-neo-full imx6sx-udoo-neo-extended"
-- 
2.7.4




More information about the buildroot mailing list