[Buildroot] [PATCH v3 3/3] board/altera: update README for new scripts and fixed some typos
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Tue Jan 24 05:16:33 UTC 2017
Hello,
On Fri, 20 Jan 2017 10:12:39 -0500, Lucas Bajolet wrote:
> output/images/
> ├── rootfs.ext2
> - ├── rootfs.ext3 -> rootfs.ext2
As explained in my review on PATCH 1/3, ext3 should probably be kept in
the defconfig, and therefore this should be kept.
> Prepare your SDcard
> ===================
> @@ -111,22 +97,26 @@ let's assume it is /dev/mmcblk0:
> Delete all previous partitions with 'd' then create the new partition table,
> using these options, pressing enter after each one:
>
> - * n p 1 9000000 +20480K t 1 b
> - * n p 2 4096 +4496384K t 83
> - * n p 3 2048 +1024K t 3 a2
> + * n p 1 1 4095
> + * n p 2 4096 +22000
> + * n p 3 <Enter> -- This will take the remaining space from the SD card
> +
> +Then, still in fdisk, change the type of the partitions according to this
> + * t 1 a2
> + * t 2 b
Remove all this stuff that explains how to prepare the SD card. If we
have a genimage script that creates a ready to use SD card image, then
there is no need to re-explain all of this in the readme.txt file.
> +(ALT) Install the binaries to SDcard from genimage
> +--------------------------------------------
> +
> +`genimage` will generate a `sockit_image.img` image in the output folder.
> +From that point, you will need to execute the following command:
> +
> + $ sudo dd if=sockit_image.img of=/dev/mmcblk0
Please name the image sdcard.img, and use the following instruction:
sudo dd if=output/images/sdcard.img of=/dev/mmcblk0
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
More information about the buildroot
mailing list