[Buildroot] [git commit] configs/olimex_a13_olinuxino: new defconfig
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Wed Jun 21 21:06:11 UTC 2017
commit: https://git.buildroot.net/buildroot/commit/?id=d7bdee2d41a3addb5d8fb9efab1ea29cd50c997b
branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Add initial support for a13_olinuxino board
with below features
- U-Boot 2017.05
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra at openedev.com>
Reviewed-by: Jagan Teki <jagan at amarulasolutions.com>
[Thomas:
- use full name in DEVELOPERS file
- remove parametrization of the post-build.sh script, just hardcode
the boot.cmd file used as input
- add missing dosfstools and mtools host packages in defconfig,
needed because a vfat partition is defined in the genimage.cfg
file
- minor tweaks to readme.txt file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
.gitlab-ci.yml | 1 +
DEVELOPERS | 4 +++
board/olimex/a13_olinuxino/boot.cmd | 7 +++++
board/olimex/a13_olinuxino/genimage.cfg | 34 +++++++++++++++++++++++
board/olimex/a13_olinuxino/post-build.sh | 7 +++++
board/olimex/a13_olinuxino/readme.txt | 43 +++++++++++++++++++++++++++++
configs/olimex_a13_olinuxino_defconfig | 46 ++++++++++++++++++++++++++++++++
7 files changed, 142 insertions(+)
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 45c9b87..fe2c7fe 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -127,6 +127,7 @@ nitrogen6sx_defconfig: *defconfig
nitrogen6x_defconfig: *defconfig
nitrogen7_defconfig: *defconfig
odroidc2_defconfig: *defconfig
+olimex_a13_olinuxino_defconfig: *defconfig
olimex_a20_olinuxino_lime2_defconfig: *defconfig
olimex_a20_olinuxino_lime_defconfig: *defconfig
olimex_a20_olinuxino_lime_mali_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 1b1cefe..315849a 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -338,6 +338,10 @@ F: package/libdvbsi/
F: package/libsvg/
F: package/libsvg-cairo/
+N: Chakra Divi <chakra at openedev.com>
+F: board/olimex/a13_olinuxino
+F: configs/olimex_a13_olinuxino_defconfig
+
N: Chris Packham <judge.packham at gmail.com>
F: package/eventlog/
F: package/micropython/
diff --git a/board/olimex/a13_olinuxino/boot.cmd b/board/olimex/a13_olinuxino/boot.cmd
new file mode 100644
index 0000000..4dd1c7b
--- /dev/null
+++ b/board/olimex/a13_olinuxino/boot.cmd
@@ -0,0 +1,7 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+mmc dev 0
+fatload mmc 0 $kernel_addr_r zImage
+fatload mmc 0 $fdt_addr_r sun5i-a13-olinuxino.dtb
+
+bootz $kernel_addr_r - $fdt_addr_r
diff --git a/board/olimex/a13_olinuxino/genimage.cfg b/board/olimex/a13_olinuxino/genimage.cfg
new file mode 100644
index 0000000..6f6b0b0
--- /dev/null
+++ b/board/olimex/a13_olinuxino/genimage.cfg
@@ -0,0 +1,34 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "zImage",
+ "sun5i-a13-olinuxino.dtb",
+ "boot.scr"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot-sunxi-with-spl.bin"
+ offset = 8192
+ size = 1040384 # 1MB - 8192
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/olimex/a13_olinuxino/post-build.sh b/board/olimex/a13_olinuxino/post-build.sh
new file mode 100755
index 0000000..79dcfc9
--- /dev/null
+++ b/board/olimex/a13_olinuxino/post-build.sh
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+MKIMAGE=$HOST_DIR/usr/bin/mkimage
+
+$MKIMAGE -A arm -O linux -T script -C none \
+ -d board/olimex/a13_olinuxino/boot.cmd \
+ ${BINARIES_DIR}/boot.scr
diff --git a/board/olimex/a13_olinuxino/readme.txt b/board/olimex/a13_olinuxino/readme.txt
new file mode 100644
index 0000000..b64e339
--- /dev/null
+++ b/board/olimex/a13_olinuxino/readme.txt
@@ -0,0 +1,43 @@
+A13-OLinuXino
+
+Intro
+=====
+
+This default configuration will allow you to start experimenting with
+the buildroot environment for the A13-OLinuXino. With the current
+configuration it will bring-up the board, and allow access through the
+serial console.
+
+For more details about the A13-OLinuXino:
+
+https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino/open-source-hardware
+
+How to build it
+===============
+
+Configure Buildroot:
+
+ $ make olimex_a13_olinuxino_defconfig
+
+Compile everything and build the rootfs image:
+
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+The sdcard.img file is a complete bootable image ready to be written
+on the boot medium. To install it, simply copy the image to a micro SD
+card:
+
+ # dd if=output/images/sdcard.img of=/dev/sdX
+
+Notes:
+ - replace 'sdX' with the actual device with your micro SDcard,
+ - you may need to be root to do that (use 'sudo').
+
+Eject the SD card, insert it in the A13-OLinuXino board, and power it
+up.
diff --git a/configs/olimex_a13_olinuxino_defconfig b/configs/olimex_a13_olinuxino_defconfig
new file mode 100644
index 0000000..df2a722
--- /dev/null
+++ b/configs/olimex_a13_olinuxino_defconfig
@@ -0,0 +1,46 @@
+# Architecture
+BR2_arm=y
+BR2_cortex_a8=y
+
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
+
+# System configuration
+BR2_TARGET_GENERIC_HOSTNAME="a13-olinuxino"
+BR2_TARGET_GENERIC_ISSUE="Welcome to OLinuXino!"
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.05"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A13-OLinuXino"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_FORMAT_BIN=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5"
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun5i-a13-olinuxino"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+
+# Filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/olimex/a13_olinuxino/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a13_olinuxino/genimage.cfg"
+
+# Additional tools
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_HOST_MTOOLS=y
More information about the buildroot
mailing list