[Buildroot] libqeglfs.so not found on imx6

[Jagan Teki]

Hi Fabio,

On Thu, Mar 2, 2017 at 10:52 PM, Fabio Estevam <festevam at gmail.com> wrote:
> On Thu, Mar 2, 2017 at 2:15 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>
>> I've built GPU drivers as well, please see below kernel dmesg.
>>
>> dmesg:
>> ---------
>> [    1.002652] console [ttymxc3] enabled
>> [    1.016395] etnaviv gpu-subsystem: bound 134000.gpu (ops gpu_ops)
>
> I see you are using the mainline kernel.
>
> You need to install mesa 17.0.0 and etnaviv gallium drivers (they are
> available in the master branch now).
>
> Then you can use kmscube for a quick test to check everything was
> properly installed.

This is what the kmscube log shows, used the patch [1]

# kmscube
trying to load module exynos...failed.
trying to load module i915...failed.
trying to load module imx-drm...success.
MESA-LOADER: device is not located on the PCI bus
MESA-LOADER: device is not located on the PCI bus
MESA-LOADER: device is not located on the PCI bus
Using display 0x1efa398 with EGL version 1.4
EGL Version "1.4 (DRI2)"
EGL Vendor "Mesa Project"
EGL Extensions "EGL_EXT_buffer_age EGL_EXT_image_dma_buf_import
EGL_KHR_cl_event2 EGL_KHR_config_attribs EGL_KHR_create_context
EGL_KHR_fence_sync EGL_K
HR_get_all_proc_addresses EGL_KHR_gl_renderbuffer_image
EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image
EGL_KHR_image EGL_KHR_image_base EG
L_KHR_image_pixmap EGL_KHR_no_config_context EGL_KHR_reusable_sync
EGL_KHR_surfaceless_context EGL_KHR_wait_sync
EGL_MESA_configless_context EGL_MESA_dr
m_image EGL_MESA_image_dma_buf_export "
GL Extensions: "(null)"


[1] https://patchwork.ozlabs.org/patch/728156/

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.